Search — Iraqi Digital Repository

Search results: 25 out of 10,578

دراسة تاثير السباكة بالعصر وتقانة ميتالورجيا المساحيق على بعض خواص المواد المتراكبة ذات اساس المنيوم والمقواة بدقائق ZrO2 وY2O3 == Study The Effect of Squeeze Casting And Powder Metallurgy Technique on Some Properties of Aluminum Matrix Composites Reinforced With (ZrO2) And (Y2O3) Particles

Author name: عبد القادر احمد عناز عثمان الجميلي

Supervisor name: فاروق منصور مهدي

General topic: Production engineering metallurgy and materials

Specific topic: Production Engineering and Metallurgy

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Mechanical Engineering

Language: Arabic

University location: Salahaddin

First pages:

تحديد السرعة الحرجة للمركبات اثناء السير على الطرق المبتلة == Determination of The Critical Speed of The Vehicles on Wet Roads

Author name: محسن علي مرعي الجبوري

Supervisor name: ابراهيم علي محسن

General topic: Mechanical Engineering

Specific topic: Applied Mechanics

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Mechanical Engineering

Language: Arabic

University location: Salahaddin

First pages:

تحليل اساليب الادارة الهندسية وتطبيقاتها في صيانة محطة كهرباء بيجي الحرارية == Analysis of Engineering Management Methods And Its Application In Maintenance of Baiji Thermal Power Plant

Author name: منصور حماد عبد العكيدي

Supervisor name: سالم عبد الله صالح الدليمي

General topic: Production engineering metallurgy and materials

Specific topic: Production Engineering and Metallurgy

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Mechanical Engineering

Language: Arabic

University location: Salahaddin

First pages:

دراسة تجريبية لتاثير عمق الماء على انتقال الكتلة لمقطر شمسي سلبي باضافة محاليل كيمياوية == Experimental Study of The Effect For Water Depth on The Mass Transfer of Apassive Solar Still Chemical Solutions

Author name: دلف شاكر محمود حسن

Supervisor name: فياض محمد عبد الدليمي | محمد كامل محمد

General topic: Mechanical Engineering

Specific topic: Mechanical Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Mechanical Engineering

Language: Arabic

University location: Salahaddin

First pages:

دراسة الخواص الاهتزازية لصفيحة مثقبة مغمورة داخل مائع == Studying The Dynamic Characteristics of Perforated Plate Submerged In Fluid

Author name: مقداد حسن محي الدين

Supervisor name: تحسين طه عثمان

General topic: Mechanical Engineering

Specific topic: Applied Mechanics

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Mechanical Engineering

Language: Arabic

University location: Salahaddin

First pages:

دراسة وتحليل نظام شمسي من نوع القطع المكافئ باستخدام المحاكاة والاسلوب العلمي وبالتتبع التلقائي == Experimantal Performance Exploration of Parabolic Trough Solar System With Tracking

Author name: حسام سامي ذياب الجنابي

Supervisor name: فياض محمد عبد الدليمي | عادل عبد الرزاق الكميت

General topic: Mechanical Engineering

Specific topic: Mechanical Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Mechanical Engineering

Language: Arabic

University location: Salahaddin

First pages:

محاكاة عددية ودراسة عملية لجريان ثنائي الطور في نفاث متقارب - متباعد == Experimental And Simulation of Tow Phase Flow In Convergent _ Divergent Nozzle

Author name: سيناء خضير سلمان

Supervisor name: فياض محمد عبد الدليمي | مكي حاج زيدان

General topic: Mechanical Engineering

Specific topic: Power Mechanics

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Mechanical Engineering

Language: Arabic

University location: Salahaddin

First pages:

مشكلة الرسوبيات في خزان خاصة جاي وطرق التصدي لها == Sedimentation Problem In Khassa Chai Reservoir And Methods of Combat

Author name: مصطفى نجدة قاسم

Supervisor name: محمود عزت محمود

General topic: Civil Engineering

Specific topic: Water Resources Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: English

University location: Salahaddin

First pages:

دراسة نوعية للمياه الجوفية لمناطق مختارة من محافظة نينوى == Study of Groundwater Quality of Selected Areas Within Ninevah Governorate

Author name: احمد خليل ابراهيم

Supervisor name: عبد المحسن سعد الله شهاب | وليد محمد شيت

General topic: Civil Engineering

Specific topic: Civil Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

اثر ارتفاعات الابنية وتراصها على تلوث الهواء كمؤشر للسعة البيئية : دراسة تطبيقية في بعض شوارع كركوك == The Effect of Buildings Height And Their Proximity on Air Pollution As An Indicator For Environmental Capacity : Applicative Study In Some of Kirkuk Street

Author name: مريم حسن احمد سليمان بيك

Supervisor name: عباس حميد سليمون | ميسون محي هلال

General topic: Civil Engineering

Specific topic: Environmental Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

دراسة عملية لسلوكية العتبات الخرسانية المسلحة والمقواة تحت تاثير الاحمال الساكنة والصدمية == Experimental Study To Behavior of Reinforced Concrete Beams Strengthing Under Static And Impact Loads

Author name: معتز ابراهيم علي الجبوري

Supervisor name: عزيز ابراهيم عبد الله

General topic: Civil Engineering

Specific topic: Civil Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

دراسة نوعية مياه الامطار وتاثيرها على بعض خصائص التربة في قضاء الطوز == Study of Rainwater Quality And Its Effect on Some Soil Characterstics In TUZ Region

Author name: شنو مصطفى علي محمد

Supervisor name: اياد فضيل قاسم النعمة | احمد سعيد عثمان الدباغ

General topic: Civil Engineering

Specific topic: Environmental Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

دراسة سلوك القص للعتبات الخرسانية ذاتية الرص المسلحة والمعززة بالالياف الهجينة ذات المقطع - I - المقواة بالصفائح الحديدية == Shear Behavior of Self Compaction Reinforced Concrete I - Beams Enhanced With Hybrid Fibers And Strengthening By Steel Plates

Author name: وليد عبد جاسم حمادي

Supervisor name: ميسر محمد جمعة

General topic: Civil Engineering

Specific topic: Structural Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

دراسة سلوك الانثناء للعتبات الخراسانية الليفية المسلحة == Study of The Flexural Behavior of Fibrous Reinforced Concrete Beams

Author name: انفال منصور حميد

Supervisor name: مازن برهان الدين عبد الرحمن | ميسر محمد جمعة

General topic: Civil Engineering

Specific topic: Structural Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

استنباط معامل نوعية المياه لنهر دجلة بين الشرقاط والبوعجيل == Development of Water Quality Index For Tigris River Water Between Alsharqat And Alboajeel

Author name: محمد مثنى نعمان

Supervisor name: اياد فضيل قاسم النعمة

General topic: Civil Engineering

Specific topic: Environmental Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

سلوك الانثناء في العتبات الخراسانية المسلحة ذات مقطع T والمعززة بالياف البولي بروبلين والحديد الهجينة == Flexural Behavior of Hybrid Polypropylene And Steel Fiber Reinforced Concrete T - Beam

Author name: عز الدين سليمان نجم البياتي

Supervisor name: مازن برهان الدين عبد الرحمن

General topic: Civil Engineering

Specific topic: Structural Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

ازالة بعض العناصر الثقيلة من المخلفات السائلة باستخدام الكاربون المنشط الحبيبي == Removal of Some Heavy Metals From Liquid Waste By Using Granular Activated Carbon

Author name: عباس علي كنوش حمد الجبوري

Supervisor name: مزهر مهدي ابراهيم الدوري

General topic: Civil Engineering

Specific topic: Environmental Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

الخصائص الهيدروليكية للجريان فوق الهدارات المثلثة عريضة الحافة

Author name: محمد فائق ياس خضر

Supervisor name: رعد هوبي ارزوقي

General topic: Civil Engineering

Specific topic: Water Resources Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

استعمال تقنيتي الاستخلاص بالمذيبات وكواسر الاستحلاب لمعالجة الخبث النفطي الناتج من مصفى بيجي == Using The Solvent Extraction And Demulsifiers Technique To Treat The Oily Sludge From Baiji Refinery

Author name: عائشة فلاح عمر محمد

Supervisor name: مزهر مهدي ابراهيم الدوري

General topic: Civil Engineering

Specific topic: Environmental Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

تصرف العتبات الخراسانية المسلحة المتكونة من طبقتين تحت الاحمال الساكنة والصدمية == Behavior of Reinforced Concrete Double Layer Beam Under Static And Impact Load

Author name: هلكوت جهاد احمد حسن

Supervisor name: عزيز ابراهيم عبد الله

General topic: Civil Engineering

Specific topic: Structural Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Civil Engineering

Language: Arabic

University location: Salahaddin

First pages:

دراسة تاثير بعض متغيرات عملية الترسيب الكهروكيمياوي للنحاس على كفاءة العملية وخواص المسحوق المنتج == The Study of The Effect of Some Variables In Electrochemical Deposition of Copper Powder On The Efficiency of Process And Powder Properties

Author name: ميادة نوار نصيف

Supervisor name: فاروق منصور مهدي

General topic: Chemical Engineering

Specific topic: Chemical Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Chemical Engineering

Language: English

University location: Salahaddin

First pages:

Abstract: يهدف البحث الى اجراء دراسة عملية لانتاج مسحوق النحاس باستعمال طريقة الترسيب الكهروكيمياوية مع دراسة تاثير عدد من المتغيرات التي تؤثر في كفاءة العملية والوقوف على طبيعة تاثير كل منها. تمت دراسة تاثير كل من كثافة التيار وزمن الترسيب ودرجة حرارة وسط الترسيب | The present study aims to produce copper powder by the electrochemical deposition method. In this work, the effect of current density, deposition period, electrolyte temperature, distance between electrodes, ratio of anode to cathode surface area and cathode rotation on the current efficiency and powder properties such as apparent density, grain size, grain size distribution and grain morphology on powder properties and current efficiency are studied. A deposition system composed of Perspex cell, two copper electrodes ( 96.8% purity), electrolyte composed of 90g/l CuSO4 and 120g/l H2SO4 as well as the electrical connections. Betts method was followed by this study.The automatic sieve shaker was used to determine the grain size, while the atomic spectroscopy was used to determine copper purity. Moreover, both optical microscope and SEM were used to estimate powder morphology. It is found that current efficiency is increased with increasing deposition time and electrolyte temperature. It is also found to be decreased with increasing current density, distance between the electrodes, ratio of anode to cathode surface area and rotation of cathode electrode. The results showed also that particle size is increased with increasing the distance between the electrodes and increased with increasing the ratio of anode to cathode surface area and cathode rotation. Further more, the obtained data indicated that the maximum and minimum achieved fine grain percent (

اكسدة ايون الحديدوز الى ايون الحديديك باستخدام المضافات في العمود ذو الفقاعة == Oxidation of Ferrous To Ferric Ion By Additives In Bubble Column

Author name: صباح محمد حسن الجبوري

Supervisor name: رافع جمال يعقوب

General topic: Chemical Engineering

Specific topic: Chemical Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Chemical Engineering

Language: English

University location: Salahaddin

First pages:

Abstract: تم دراسة اكسدة كبريتات الحديدوز الى كبريتات الحديديك من خلال التركيز على اختبار تاثير الظروف التشغيلية للمنظومة على عملية اكسدة كبريتات الحديدوز بالهواء ومن ثم دراسة تاثير المضافات في اتمام عملية الاكسدة باستخدام الاوكسجين في العمود الفقاعي. تم استخدام ا | This study was discussion converting of ferrous sulfate to ferric sulfate by oxidation with using the bubble column and concentrates by using air and then studied the effect of additives to complete the oxidation with oxygen. Air is used as an oxidation agent in the first step to study the oxidation reaction in bubble column with(5 cm inside diameter ,120 cm tall ), in this part of process, studying the operation condition on the oxidation and determining the rate of conversion. Temperature ( 50,60 and 70 )°C ,air flow rate (100,150,200 and 250)L/h and initial concentration of ferrous (0.5 , 0.25 , 0.1 and 0.05 )M with fixing the pressure slightly up to 1 atmosphere are used to study the performance of the parameters (initial concentration ,temperature and air flow rate on oxidation ferrous sulfate.The effect of these conditions are studied throughout the experimental work to increase the conversion rate of ferrous sulfate.The results are shown that the maximum conversion rate is 53.5% at the temperature 70 °C ,air flow rate 150 L/h and initial concentration of ferrous is 0.1M.The results of the optimum conditions are depended on the second part of this work by using oxygen gas and additive material, (CuSO4, KMnO4, H2O2 and HNO3) at the different concentration (100 , 200 , 300 , 400 , 500 ) ppm, the effect of each material is studied to show the conversion rate of ferrous to ferric sulfate.The test of these material gave different results for each material and gave different result for each concentration of additive on the conversion rate of ferrous.The best result is that the conversion rate is 81.1 % by using CuSO4 at additive concentration 400ppm, the conversion rate is 78.9% by using HNO3 at concentration of additive 200 ppm , the conversion rate is 73.1% by using KMnO4 at concentration of additive 400 ppm and the conversion rate is 70% by using H2O2 at concentration of additive 200 ppm.Mathematical correlation for each additive and the main operating variables on oxidation of ferrous to ferric sulfate are solved by using (Excel) program are illustrated : - (d[?Fe?^(+2)])/dt=0.612067 t+0.011378 Cadd ? 2.86622.

تسريع انتاج الخل بالطريقة المستمرة == Speeding - Up The Production of Vinegar By Continuous Ferementation

Author name: خليل عيدان حمد الدليمي

Supervisor name: عبد القهار مهدي محمد السامرائي

General topic: Chemical Engineering

Specific topic: Chemical Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Chemical Engineering

Language: Arabic

University location: Salahaddin

First pages:

Abstract: تمت الدراسة على جهاز تخمير ريادي؛ باستخدام الطريقة المستمرة في انتاج حامض الخليك ومن ثم اجراء تقييم للظروف المثلى في عملية الانتا م في هذا البحث دراسة تاثير المتغيرات (معدل تدفق الهواء, وسرع المزج, ودرجة الحرارة ,والدالة الحامضية (pH ), وتركيز الاوكسجين ا | The research has been achieved by means of fermentation system by Continuous method to produce acetic acid and then evaluation of the optimum condition of production process. This research aims to study the effect of some operation variables like (air flow rate, speed of mixing, temperature, acidic function ( pH ) , and dilution rate of alcohol ) , on acetic acid production. The operation conditions that worked are (air flow rate ( 1 - 4) m3 / hr ) , speed of mixing( ( 50 - 400) rpm ) temperature (( 18 - 33)C? ) , and dilution rate ( ( 0.005 - 0.02) hr - 1 )). The optimum operating conditions to produce acetic acid by continuous process are as follow : (air flow rate ( 3 m3 / hr ) ,speed of mixing (100 rpm) , temperature ( 30 C? ), dilution rate of alcohol(0.005 hr - 1) initial alcohol concentration ( 48 g / l ) and initial concentration of acetic acid ( 40 g / l )).. The biological variables of acetic acid bacteria have been studied in the fermentation process in continuous method ( concentration of living mass , consumed alcohol , the produced acetic acid and the dissolved oxygen concentration) in addition to the lateral variables of the process ( aeration flow rate, speed of mixing , temperature , function of acidity and dilution rate ) as algebraic differential equations Mathematical models of the continuous process of fermentation process (used as simulation solutions).

معالجة عناصر الخارصين والنحاس والمنغنيز في مياه الفضلات الصناعية بطريقة الترسيب الكيمياوي == Treatment of Zinc ,Cupper And Manganese In Wastewater By Chemical Precipitation

Author name: يوسف صالح عيسى

Supervisor name: دريد فاضل احمد

General topic: Chemical Engineering

Specific topic: Chemical Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Chemical Engineering

Language: Arabic

University location: Salahaddin

First pages:

Abstract: تهدف هذه الدراسة الى ايجاد تاثير المعالجة الكيمياوية بطريقة الترسيب الكيمياوي على كفاءة ازالة العناصر الثقيلة في مياه الفضلات الصناعية المطروحة لتصل الى النهر بالتراكيز المسموح بها. تتم عملية الترسيب الكيمياوي بالسيطرة على الدالة الحامضية لمياه الفضلات ب | This study aims to find the effect of chemical treatment by chemical precipitation on the efficiency of removing heavy metals from wastewater to be poured back to the river. Chemical precipitation is done by controlling the (PH) of wastewater by adding a suitable hydroxide ,different hydroxides were used like the hydroxides of sodium ,calcium and potassium 0.05N each and sodium carbons 0.1N in removing heavy metals of wastewater. The study has taken prepared samples contain different concentrations of heavy metals ions like cupper 2,4 and 6 ppm zinc 5,10 and 15ppm and manganese 2,5,8 ppm Jar taste is used to show the chemical precipitation. Fast and slow mixing periods were written down to get the velocity gradient (G) and (GT) The used materials were highly efficient to remove the ions of metals. The removed amount of metals was measured by (AAS) Atomic Absorption spectroscopy. The paper has also studied the effective factors on the efficiency of precipitation like the (PH) is (8,9,10,11) and The precipitation time is (0.5,1,2,3)h.The result show that the best precipitation efficiency when an ion is used alone in the solution (PH) is (10,11) precipitation time 2h hydroxides precipitation (0.05N) it removes about 98% of cupper ions when sodium and calcium hydroxides are used ,more than 96,66% when the potassium hydroxide is used.a complete removing appears of manganese ions when the calcium hydroxide is used more than 90% when the potassium hydroxide is used.77% when the sodium hydroxide is used more than 98.4% of zinc ions removed when the sodium and calcium hydroxide is used 95.9% of zinc ions is removed when the sodium carbons are used the best treatment condition appear when the (PH) is (9 to10) and precipitation time is 2h when an ion is used alone in the solution 98% of cupper and zinc ions are removing 90% of manganese ions.When the ions are mixed in the solution the best removing efficiency appears when the (PH) is (9 to 11) and precepitition time is 2h when the hydroxides and carbons are used a complete removing of cupper ions 90% of zinc ions and more than 98.2% of manganese ions.The time of reaction to get 10.5 PH using hydroxides is (25 - 30) second when sodium carbon's are used the reaction time to get 8.5 is (50) second for cupper and zinc ,(25) second for manganese.The reaction is zero order when hydroxides are used and first order when carbons are used in treating heavy metals.

تاثير المحتوى المائي , درجة الحرارة وكلوريد الصوديوم على تاكل CO2 للصلب الكربوني (A106 B) في النفط العراقي == Effect of Water Content , Temperature And NaCl On CO2 Corrosion of C - Steel (A 106 B) In Iraqi Crude Oil

Author name: انعام يوسف عبد الرحمن

Supervisor name: سعد احمد جعفر

General topic: Chemical Engineering

Specific topic: Chemical Engineering

Degree: Master

University: Tikrit University - College Of Engineering - Department Of Chemical Engineering

Language: English

University location: Salahaddin

First pages:

Abstract: ان التاكل الداخلي في انابيب الصلب الكربوني الذي يحدث بوجود غاز ثاني اوكسيد الكربون يعتبر مشكلة جوهرية في صناعات النفط والغاز وهو يقترن دائما مع وجود الماء. ان احتمالية حدوث التاكل تزداد بصورة عامة مع تزايد نسبة الماء ومع زيادة مستوى الماء المنتج تزداد مع | Internal corrosion of carbon steel pipelines occurring in the presence of CO2 is a substantial problem in the oil and gas industries. It is always associated with the presence of free water. The likelihood of corrosion generally increases with the volume fraction of the water phase. As the produced water level increases, the corrosion rates of carbon steel increase very rapidly and causes damage of petroleum and gas pipelines. The present research work focuses on the investigating of the corrosion rate of carbon steel as flow line in crude oil production with CO2 content employing three Iraqi crude oil (Kirkuk crude oil, Halfaya crude oil, Rumalia crude oil) with different brine concentrations [1%NaCl, 2%NaCl, 3%NaCl]. Determining the corrosivity of Iraqi crude oil was studied for the first time. Experiments were performed in an autoclave test apparatus, crude oil - produced water mixtures, water cuts were (0, 10, 20, 30, 40, and 100%), and total volume of mixtures inside the autoclave was always kept at 100ml and temperature (20, 40, 60°C). For all experiments, CO2 partial pressure was maintained at (4 bar) and rotational speed (500 rpm).The corrosion rates were determined by the weight loss technique. The results revealed that the corrosion rates of carbon steel increased by increasing water cut and temperature, but decreases with increasing salt concentration for all types of crude oil. Results also indicated that different crude oil has significantly different effects on corrosion of carbon steel, with identical brine compositions. Therefore, Rumaila crude oil exhibits the highest corrosion rates and Kirkuk crude oil exhibits the lowest corrosion rates while Halfaya crude oil exhibits a moderate corrosion rates e.g. at 1% NaCl, 20% water cut, temperature 60°C, pressure 4bar, the corrosion rate of carbon steel in Rumaila crude oil is 0.9163mm/yr whereas it is 0.564 mm/yr and 0.705 mm/yr in Kirkuk crude oil and Halfaya crude oil respectively. The Corrosion Rate Break produced water level was determined from the experiments. These tests are employed to evaluate the requirements for corrosion inhibitor treatment. At 100% water cut (brine/CO2) the corrosion rates of carbon steel was the highest. The presence of crude oil decreases the corrosion rates e.g. at 1% NaCl,100% water cut(brine/CO2) the corrosion rate is 7.1197 mm/yr, whereas at 40% water cut/ Rumaila crude oil the corrosion rate is 1.4097 mm/yr.