Show: 25 50 75 100 Results

Search results: 25 out of 3,038

تحضير طابوق حراري واطئ الكثافة من مخلفات محلية == Preparing Heating Brick of Low Density From Local Scrap .

Author name: محمد عبد الرضا وناس الوائلي
Supervisor name: خضير عباس مشجل | فاضل عبد رسن
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم في هذا البحث تحضير طابوق حراري واطئ الكثافة حقق خواص ليلائم استعماله في تبطين سقوف الافران الحرارية . حضرت خلطات من (كاؤولين دويخله, والالومينا Alumina وكاربونات الكالسيوم CaCo3 وخامس اوكسيد الفسفور ,ومواد مخلفات محلية مثل السبوس ونشارة الخشب والفلين ) واضيفت بنسب خلط معينة . حضرت هذه الخلطات بظروف طحن وكبس وتجفيف وحرق بدرجة حرارة معروفة حيث تم اختيارها لضمان الحصول على طابوق حراري عازل خفيف الوزن ويحقق المواصفات المطلوبة.اعتمدت ثلاث خلطات ,عرفت بالرموز[ M1 ,M2 ,M3 ] وشكلت نماذجها تحت ظروف محددة وثلاث درجات للحرق وهي C (900 , 1000 , 1100) لدراسة تاثير نسب الخلط وتاثير المواد المضافة من مخلفات محلية ودرجة حرارة الحرق بغية الحصول على افضل نتائج تحقق مواصفة الطابوق واطئ الكثافة .حيث درست المواصفة لنعرف من خلالها الخواص الميكانيكية والخواص الفيزياوية.تم الحصول او التوصل الى طابوق حراري واطئ الكثافة بالمواصفات التالية : 1. متانة انضغاط Mpa (7.437)2. توصيلية حرارية 0.466) watt/m.co )3. كثافة حجمية gm/cm3(0.930) وقد وجدت هذة المواصفات عند العينةF23 والمحضرة من( %70 M2 + 30% نشارة خشب + سائل P2O5 مخفف) . حيث تقع هذه القيم ضمن مدى المواصفة العالمية. | In this research , it happens to prepare heating brick of low density . Its properties are made to suit its use in lining the roofs of the heating furance . Mixtures of ( Kaoline Doukhla , Alumina , Calcium carbonate CaCo3 , phosphor Oxide 5 , and other local scrap, like wood chips and cork ) are prepared and added with certain rates of mixing . these mixtures have been prepared under the conditions of pressing , grinding , drying , and burning with known degree of heating . These degrees are chosen to guarantee obtaining of heating , insulator , and lightes - Weigh brick according to the required specifications .Three mixtures have been adopted , knew as [ M1, M2 , M3 ] . Their samples are formed under certain conditions and of three degrees of burring , they are ( 900 , 1000 , 1100) oc for the aim of studying the influence of mixing rates and the affect of the added materials of local scrap and the degrees of burning for the purpose of getting the best results that meet the specifications of low density brick .The specifications have been studied to know their mechanical and physical properties . We have got a heating low density heating brick with these properties : 1 - Compressing Strength ( 7.437 ) Mpa 2 - Heating Conductivity ( 0 . 466 ) Watt/ m.oc. 3 - Bulk Density ( 0 . 930 ) gm/ cm3 . These specifications were founded at the sample F23 that has been prepared from( 70% M2 + 30 % Wood chips + P2O5 liquid) . These results are within the international specifications . In this research , it happens to prepare heating brick of low density . Its properties are made to suit its use in lining the roofs of the heating furance . Mixtures of ( Kaoline Doukhla , Alumina , Calcium carbonate CaCo3 , phosphor Oxide 5 , and other local scrap, like wood chips and cork ) are prepared and added with certain rates of mixing . these mixtures have been prepared under the conditions of pressing , grinding , drying , and burning with known degree of heating . These degrees are chosen to guarantee obtaining of heating , insulator , and lightes - Weigh brick according to the required specifications .Three mixtures have been adopted , knew as [ M1, M2 , M3 ] . Their samples are formed under certain conditions and of three degrees of burring , they are ( 900 , 1000 , 1100) oc for the aim of studying the influence of mixing rates and the affect of the added materials of local scrap and the degrees of burning for the purpose of getting the best results that meet the specifications of low density brick .The specifications have been studied to know their mechanical and physical properties . We have got a heating low density heating brick with these properties : 1 - Compressing Strength ( 7.437 ) Mpa 2 - Heating Conductivity ( 0 . 466 ) Watt/ m.oc. 3 - Bulk Density ( 0 . 930 ) gm/ cm3 . These specifications were founded at the sample F23 that has been prepared from( 70% M2 + 30 % Wood chips + P2O5 liquid) . These results are within the international specifications . In this research , it happens to prepare heating brick of low density . Its properties are made to suit its use in lining the roofs of the heating furance . Mixtures of ( Kaoline Doukhla , Alumina , Calcium carbonate CaCo3 , phosphor Oxide 5 , and other local scrap, like wood chips and cork ) are prepared and added with certain rates of mixing . these mixtures have been prepared under the conditions of pressing , grinding , drying , and burning with known degree of heating . These degrees are chosen to guarantee obtaining of heating , insulator , and lightes - Weigh brick according to the required specifications .Three mixtures have been adopted , knew as [ M1, M2 , M3 ] . Their samples are formed under certain conditions and of three degrees of burring , they are ( 900 , 1000 , 1100) oc for the aim of studying the influence of mixing rates and the affect of the added materials of local scrap and the degrees of burning for the purpose of getting the best results that meet the specifications of low density brick .The specifications have been studied to know their mechanical and physical properties . We have got a heating low density heating brick with these properties : 1 - Compressing Strength ( 7.437 ) Mpa 2 - Heating Conductivity ( 0 . 466 ) Watt/ m.oc. 3 - Bulk Density ( 0 . 930 ) gm/ cm3 . These specifications were founded at the sample F23 that has been prepared from( 70% M2 + 30 % Wood chips + P2O5 liquid) . These results are within the international specifications .

وصف العازل الكهربائي لقدرة ايقاف الجسيمات المشحونة في المواد الصلبة == Dielectric Description of Stopping Power for charge particles in Solid Materials

Author name: محمد جاسم محمد علي الكندي
Supervisor name: خالد عبد الوهاب احمد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم في هذا البحث اجراء دراسة نظرية لموضوع دالة العازل (dielectric function)، فقد تمت مقارنة نوعين مهمين من دوال العازل وهي دالة العازل للباحث (Lindhard1954) ، ودالة العازل للباحث (Mermin 1970). وقد تضمنت الدراسة استخدام هذين الانموذجين في حساب كل من الجهد المحتث والمؤثر (Induce and Wake Potential) ، والقوى المؤثرة (القوة الموقفة Stopping force والقوة الجانبية Lateral force) بالاحداثيات الديكارتية (Cartizian coordintate) (x,z) والاحداثيات الاسطوانية (Cylindrical corrdinate) (ρ,z). وكذلك حساب قدرة الايقاف (Stopping power) والتطوح في الطاقة (Straggling of energy) للجسيمات المشحونة (البروتونات) الساقطة على اهداف صلبة (الالمنيوم Al، السيليكون Si، النحاس Cu، الفضة Ag، الذهب Au) والتي تتحرك بسرعة منتظمة ) υ (. استخدمت الطرائق الرياضية التقريبية للحساب، وبرمجة بعض المعادلات وفق برنامج كتب بلغة فورتران (Fortran - 90) ، للحصول على النتائج النظرية المطلوبة التي تم توضيحها كرسوم بيانية.وبالنتيجة استنتجنا ان الاختلاف بين الانموذجين لدالة العازل (Mermin 1970 and Lindhard 1954) يقع في منطقة السرع الواطئة والمتوسطة، ولوحظ هناك تطابقا" واضحا" عند السرع العالية، وان تاثير الجهد المؤثر (Wake potential) ، والقوة الموقفة (Stopping force) (التي تعرف على انها قدرة الايقاف) يكون باعلى قيمة له لحظة تفاعل البرتون مع الهدف اي عند النقطة المرجعية (Reference point =0, Z=0) على عكس القوة الجانبية (Lateral force) التي لا يوجد لها اي تاثير عند النقطة المرجعية. ومن المهم ايضا الاخذ بنظر الاعتبار الحالات الخاصة للسرعة التي يتحرك بها الجسيم المشحون ونوع الوسط العازل المستخدم. | In this research a theoretical study carried out on the subject of dielectric function, where the comparison between two important dielectric functions (which is the Lindhard 1954 dielectric function and Mermin 1970 dielectric function) has been performed. This investigation has dealt with using these two samples to calculate the Induce and wake potential, stopping force and lateral force in the cartizian coordinate (x,z) and cylindrical coordinate (z, ). And also to calculate the stopping power and straggling of energy for the charged particales (protons) falling on the solid targets (Aluminum [Al], Silicon [Si], Copper [Cu], Sliver [Ag], Gold [Au]). A mathematical approximative methods used in the calculation and some of equation where programmed by computer program (Fortran 90) to obtain the theoretical results which is shown in graphic. In the results we conclude that the difference between the two dielectric functions (Lindhard 1954 and Mermin 1970) is in the low and medium velocities and also seen that it is superposed in the high velocities and the effect of the wake potential and stopping force be in the maximum value the moment of intraction between protons and target i. e. (in the reference point  = 0, Z = 0) on the opposite of lateral force which has no effect on the Reference point. It is also important to take to consideration the special cases of velocity of the charged particles and the kind of dielectric medium used

تصحيح القشرة وبلوخ العكسي المحسوبة من نظريات قدرة الايقاف لبور وبيتا

Author name: كريم سهيل نجم عبد الله
Supervisor name: رياض خليل احمد العاني
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم في هذا لبحث وضع الافكار النظرية الاساسية لحساب تصحيح القشرة باستعمال الانموذج الكمي(Bethe,1930 ) والانموذج الكلاسيكي( Bohr,1913) باستعمال النظرية الحركية(K.T. )Kinetic theory، انموذج المتذبذب التوافقي (H.O.)Harmonic Oscillator ، انموذج الغاز الالكتروني الحر (F.E.G ) Free Electron Gas model، والمعالجة الكلاسيكية للتصادمات القريبة والبعيدة للبروتونات في الاهداف الصلبة(Al,C,Si ) مع تاثير التبادل. حيث لاحظنا ان تصحيح القشرة في نظرية بور اكبر من تصحيح القشرة في نظرية بيـتا. كذالك تم حساب تصحيح القشرة للاغلفة الثانوية وتصحيح القشرة الكلي للبروتونات في الاهداف الصلبة(Al,C,Si) مع تاثير التبادل. تم في هذا البحث اجراء دراسة نظرية لحساب عدد الايقاف في نظرية بيتا للبروتونات في الاهداف الصلبة ((Al,C,Si مع تاثير التبادل بواسطة النماذج الذرية الثلاث (K.T., H.O., F.E.G). ففي العمل الحالي قمنا باجراء دراسة نظرية حول حساب عدد الايقاف وتصحيح بلوخ العكسي باستعمال النظرية الثنائية(B.T) في السرع الواطئة للبروتونات في السليكون مع تاثير التبادل وذالك لان تصحيح بلوخ العكسي يعتبر من التصحيحات المهمة لما له من اهمية في عملية الانتقال السلس ما بين المناطق ذات السرع الواطئة ( المناطق الكلاسيكية) والمناطق ذات السرع العالية(المناطق الكمية ). تم كتابة البرنامج الرئيسي(K.ube) بلغة الفورتران(Fortran 90) الذي تضمن كل الحسابات التقريبية والمباشرة للمعلمات اعلاه.

دراسة تاثير التركيزعلى الكفاءة الكمية لصبغة الفثالوسيانين - نحاس CuPc == Study of the effect of concentration on the quantum efficiency of copper - Phthalocyanine dye (CuPc

Author name: كاترين كاظم شنشل
Supervisor name: محمد تقي حسين | صبري جاسم لفتة
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: لقد تمت دراسة اطياف الامتصاص والفلورة للصبغة العضوية نوع الفثالوسيانين - نحاس(CuPc) في المذيب الدايوكسان, وتحت ظروف طبيعية عن(درجة حرارة الغرفة) وللتراكيز الثلاثة (5x10 - 5 , 1x10 - 4 , 2x10 - 4) مولاري. ان الشدة النسبية لطيفي الامتصاص والفلورة تزداد مع زيادة التركيز وهذا ينطبق مع قانون بير - لامبرت. ان جزيئة الفثالوسيانين((CuPc تمتلك حزمتي امتصاص في المنطقة المرئية وفوق البنفسجية من الطيف,حزمة الطاقة العالية تقع عند حوالي 350 نانومتر,وتعرف عموما باسم حزمة - B.بينما حزمة الطاقة الواطئة فتقع عند حوالي 650 نانومتر,وتعرف عموما باسم حزمة - Q.وقد بينت النتائج تاثير نقصان التركيز في ازاحة اطياف الامتصاص والفلورة الى الاطوال الموجية القصيرة .(Blue Shift) كانت كفاءة الكمية لـ (CuPc) عند التركيز الاول (2x10 - 4) مولاري في منطقة UV/visible 52%) و59%) على التوالي, وزمن العمر الاشعاعي (2.5071 و3.1802) نانوثانية وزمن عمر الفلورة (1.3036و 8763.1) نانوثانية على التوالي, وكانت كفاءة الكمية عند التركيز الثاني (1x10 - 4) مولاري 73%) و65%) وزمن العمر الاشعاعي (5.1426 و5.9717) نانوثانية وزمن عمر الفلورة (7540. 3 3.8816) نانوثانية وعلى التوالي, وكانت كفاءة الكمية عند التركيز الثالث (5x10 - 5) مولاري 83%) و74%) وزمن العمر الاشعاعي (6.2593 و7.6244) نانوثانية وزمن عمر الفلورة (5.1952 و5.6420) نانوثانية وعلى التوالي. دلت الدراسة لاطياف الامتصاص والفلورة للصبغة العضوية (CuPc) بان علاقة الكفاءة الكمية تتناسب عكسيا مع زيادة التركيز | The Absorption and Fluorescence spectra have been studied for organic dye Copper - phthalocyanine (CuPc) in solvent Dioxane separately under normal circumstances at (room temperature) for three concentration (2x10 - 4, 1x10 - 4, 5x10 - 5) M. The intensities of the absorption and fluorescence spectra are increasing with the increase of the concentration which agrees with Beer - Lambert Law. Phthalocyanine molecules (CuPc) have two absorption bands in the visible and ultraviolet region of the spectrum. The higher energy band, occurring at around 350 nm, is generally known as the B - band. The lower energy band, occurring at around 650nm, is generally known as the Q - band. The measurement shows that the Absorption and Fluorescence spectrum have shifted to short wavelengths (Blue Shift). The quantum efficiency of (CuPc) at (2x10 - 4 M) in UV/visible region is (qFM = 52% & 59%) respectively. While the radiative life time is (tFM = 2.5071 ns & 3.1802 ns) and the fluorescence life time is (tF = 1.3036 ns & 1.8763 ns) respectively. For the second concentration (1x10 - 4 M) is (qFM = 73% & 65%), (tFM = 5.1426 ns & 5.9717 ns) and (tF = 3.7540 ns & 3.8816 ns). For the third concentration (5x10 - 5 M) is (qFM = 83% & 74%) (tFM = 6.2593 ns & 7.6244 ns) and (tF = 5.1952 ns & 5.6420 ns).The quantum efficiency results appear to be increase with decreasing concentration.

المقاطع العرضية للانوية المركبة المتكونة من تفاعلات (n,p) و(p,n)

Author name: فردوس سامي حسين الياسري
Supervisor name: ايمان طارق العلوي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The cross sections for (p,n) and (n,p) reactions were calculated according to the available International Atomic Energy Agency (IAEA) libraries and other experimental published data. The well known international libraries like EXFOR, ENDF, JENDL, JEF, JEFF, BROND, CENDL, contain some cross sections measured during the period from the middle of the last century up to several years ago.This study is concerned with the nuclear reactions used in the production of the protons or neutrons, which are important in shielding calculations, accelerators and proton therapy.The analyzing of a complete energy range has been done starting from threshold energy for each reaction. The cross sections are reproduced in fine steps of incident proton or neutron energy in 0.01 MeV intervals with their corresponding errors. The adopted cross sections for all available experimental data have been calculated for all the considered reactions. A mathematical representative equation for all these reactions is formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.The cross sections of light elements like Tritium , Helium , Lithium isotopes ,Berlium , Boron isotopes , Carbon , Nitrogen , Oxigen , Alaminum , Silinum isotopes , , , and Phosfor in specific reactions were considered. The calculation of the adopted values for (p,n) and (n,p) reactions have been done and compared with international libraries which give good agreements.The (n,p) reactions cross sections values are derived from the data of (p,n) reactions and visa versa as a function of neutron or proton energy, respectively, by using the reciprocity theory and the principle of reverse reactions for the ground state.The stopping power according to Zeigler formulae was used in order to obtain the neutron yield for each reaction. Q - value, threshold energy, binding energy, compound nucleus cross sections, transmitted wavelength and the probability of occurrence of the reaction have been also calculated.The programmes of adopt.m, reverse.m, stop.m, yield.m, and cnpw.m have been built for the first time in the present work using Matlab 7.0 to calculate the results of the present work, as well as SRIM (2003) program.The evalutated (p,n) and (n,p) cross sections which are used for the first time, in spite of the numerous data available, a limited number of studies concerning the light elements with very small half life are still very important in nuclear technology. They prove that our calculated values are in good agreement with the published data.

تاثيرات الاشعاع على الخصائص البصرية لاغشية صبغة مثيلين ازرق المطعمة بpva == Radiation Effects on Optical Properties of Methylene Blue Dye Doped PVA Films

Author name: عمار نجم عبد
Supervisor name: محاسن فاضل هادي الكاظمي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: اجري هذا البحث على مرحلتين, الاولى هي دراسة الخصائص البصرية والتركيبية لاغشية صبغة المثلين الازرق(Methylene blue) المطعمة ببوليمر بولي فينيل الكحول(PVA) وبنسب تطعيم مختلفة وهي (10, 15, 20, 30, 40) مل من محلول الصبغة وبتركيز(1*10 - 5) مول/لتر. كل النماذج حضرت بطريقة الصب والمرحلة الثانية هي تشعيع هذه الاغشية باشعة كاما وبيتا وبجرع مختلفة ودراسة تاثير انواع التشعيع على الخصائص البصرية والتركيبية لها.حيث وجد ان طيف الامتصاص يزداد بزيادة نسب التطعيم لكل من قمتي الصبغة والبوليمر مع وجود ازاحة باتجاه الاطوال الموجية الاطول (ازاحة حمراء), وتم دراسة فجوة الطاقة البصرية ووجد ان فجوة الطاقة الطاقة للبوليمر تتناقص مع زيادة نسب التطعيم مع ثبات فجوة الطاقة للصبغة وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).بعد تشعيع غشاء البوليمر النقي واغشية الصبغة المطعمة بالبوليمر ولمختلف نسب التطعيم باشعة كاما وجسيمات بيتا وجد ان هناك زيادة ملحوضة لطيف امتصاص البوليمر النقي بينما طيف الامتصاص هذا يتناقص لاغشية الصبغة المطعمة بالبوليمر وتعاني ازاحة باتجاه الاطوال الموجية الاصغر (ازاحة زرقاء) مع بقاء قمة امتصاص البوليمر على حالها, اما فجوة الطاقة فقد تناقصت بعد التشعيع للبوليمر وازدادت للصبغة لمختلف الاغشية وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, وثابت العزل الكهربائي الحقيقي والخيالي).اما الفحوصات التركيبية فقد بين كل من حيود الاشعة السينية (XRD) وطيف (FTIR) عدم وجود تفاعل كيميائي بين الصبغة والبوليمر بعد الخلط وعدم تكسر الاواصر الاساسية لهما بعد التشعيع, واظهرت صور (FESEM) تعرض سطح البوليمر للتكسر وازدادت خشونتة بعد التشعيع بينما لم تتاثر كثيرا سطوح الاغشيه المطعمة من الصبغة والبوليمر بالتشعيع | The present work was carried out in two stages .The first stage was studying the optical and structural properties for methylene blue dye doped poly vinyl alcohol as a host polymer in different doping ratio of dye solution (10, 15, 20, 30, 50) ml with concentration of dye (1×10 - 5) mol/liter. All samples prepared by casting method. The second stage was irradiated all samples by Gamma ray and Beta particles in different doses and studying the optical and structural properties for them. The intensity of absorption spectrum increased with increasing doping ratio of dye solution for peaks of dye and polymer and gave red shift. The optical energy gap for PVA increased with increasing doping ratio of dye solution with remaind the energy gap for dye constant. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. After Gamma and Beta irradiation pure PVA film and MB/PVA films with different doping ratio of dye solution and found that the absorption spectrum increased for pure polymer, while the absorption spectrum for dye is decreased for MB/PVA films and gave blue shift with remained the absorption peak of polymer constant. The optical energy gap for PVA decreased whereas the energy gap for dye increased after irradiation. The optical constants (Absorption coefficient, Extinction coefficient, Refractive index, Real and imaginary dielectric constants) was studied. The XRD and FTIR showed no interaction between dye and polymer after doping and there are no broken fundamental bands after irradiation. FESEM photographs illustrated that the surface of all films became more roughness after irradiation.

تصميم عدسات كهروسكونيه باستخدام دوال محددة للقطع الزائد == Design Of Electrostatic Lenses Using Limited Hyperbolic Functions

Author name: عمار حسين محمد مهدي الخفاجي
Supervisor name: احمد كمال احمد | عبد الجبار محمد الفياض
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: يتضمن البحث دراسة نظريه في مجال بصريات الجسيمات المشحونه من خلال الاستعانه بطرائق التحليل العددي وباستخدام الحاسوب الشخصي.يرتكز البحث حول ايجاد التصميم الامثل لعدسات كهروسكونيه لتبئير حزم الجسيمات المشحونة ولمرايا كهروسكونيه وظيفتها معالجه الزيوغ في منظومات تتكون من عدسه ومراة باستخدام الطريقة العكسية.لقد تم في هذا البحث تصميم عدسات كهروسكونيه احادية الجهد تعمل بنمطي التكبير الصفري وغير المحدد وعدسه مغمورة تعمل بنمطي التكبير الصفري وغير المحدد ايضا، وكذلك الحال بالنسبة للمراة الكهروسكونيه احادية الجهد. وقد مثل الجهد الكهروسكوني المحوري باستخدام دوال محددة للقطع الزائد، ومن معرفه المشتقه الاولى والثانية للجهد المحوري يتم حل معادله الشعاع المحوري للحصول على مسار الجسيمات المشحونة الذي يحقق داله الجهد المفروضة لحساب الخواص البصرية مثل البعد البؤري ومعاملات الزيغ الكروي واللوني ومن ثم الحصول على شكل الاقطاب للعدسة الكهروسكونيه ومنها حل معادله لابلاس، ولقد كانت نتائج الزيوغ والخواص البصرية والاقطاب المصممة للعدسات الكهروسكونيه مقبولة | A computational invisestigion were carried out in the field of charged - particle optics with the aid of numerical analysis method and using the personal computer.It concerned with the design of electrostatic lenses for focusing charged particle beam and the design of electrostatic mirror for treatment of the aberration in optical system.During this project a unipotential lens - electrostatic lens operated under zero - magnification condition once, infinite - magnification condition.And immersion lens was operated under zero - magnification condition and infinite magnification condition.The axial electrostatic potential distribution was determined by using a hyperbolic function from which the paraxial - ray equation is solved to obtain the trajectory of particle that satisfy the suggested potential function.By known of the first and second derivatives of axial potential distribution, the optical properties such as the focal length and the spherical and chromatic aberration coefficients are determined.The electrode shape of the electrostatic lens was then determined from the solution of laplace's equation.

معدل التقشر ومتانة الانحناء لمتراكبات ثنائي هيدروكسي بنزين (هيدروكوينون) المدعمة بالالياف == Ablative Rate and Bending Strength of Fibers Reinforced Dihydroxy - Benzene(Hydroquinone) Composites

Author name: علي زامل منشد
Supervisor name: بهجت بهلول كاظم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم دراسة معدل التقشر ، التوصيلية الحرارية، متانة الانحناء،و صلادة فيكرز لمتراكبات الفينول نوع ثنائي هيدروكسي بنزين مدعمة بالياف مختلفة (الياف زجاجية نوع E على شكل حصيرة والياف كاربونية مستمرة)،وبنسب حجمية(0%،20%،40%،60%،70%) بدلالة الخواص الحرارية والميكانيكية لتغيرات الكسر الحجمي للالياف.المتراكبات التي خضعت للاختبار كانت مجموعتين هي EGFC، CFC، بالاضافة لمادة الفينول نوع هيدروكوينون(ثنائي هيدروكسي بنزين)HQR. تم استخدام تقنية الكبس الحار لتحضير المتراكبات باستخدام القوالب المارقة تحت الظروف القياسية.استعملت تقنية قرص لي لقياس التوصيلية الحرارية حسب المواصفة البريطانية القياسية لشركة جورج وكرفيه المحدودة. استخدمت تقنية الشعلة الا وكسي - استيلينية لتحديد معدل التقشر وكذلك معامل العزل الحراري حسب المواصفة القياسية ASTM - E285 - 80. وتم استخدام ماكنة Instron لحساب متانة الانحناء حسب المواصفة القياسية ASTM D - 790.واستعمل جهاز الصلادة المجهرية لفيكرز لحساب الصلادة وحسب المواصف القياسية ASTM E92 - 82 . نفذت المحاكاة لحساب معدل التقشر بثلاث ابعاد باستخدام طريقة الفروقات المحددة. اظهرت النتائج بان التوصيلية الحرارية تزداد تصاعديا بتعاقب النسبة المئوية الحجمية للالياف. من خلال النتائج النظرية لاختبار التوصيلية الحرارية التي حسبت من خلال مود يل micro structures وعند مقارنتها مع النتائج العملية تبين القيم النظرية ان هناك تقارب مع النتائج العملية. يسلك معدل التقشر سلوك معاكس حيث يكون اوطا قيمة عند اعلى نسبة مئوية حجمية للالياف ، وتبين العلاقة بين التوصيلية الحرارية ومعدل التقشر اليتين متزاملتين، الاولى مع بداية الاختبار والمميزة بتوزيع مثالي للالياف الذي يدل على الية التشتيت الحراري بالالياف بسبب تكون شبكة من مسارات التوصيلية الحرارية، والثانية التي ترافق اختبار التقشر والمميزة بمظهر تكون الشروخ القصية التي تدل على الية تكون الفحم المبكرة.كما تبين بان متانةالانحناء تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف ، وتعرض العلاقة بين الكسر الحجمي ومتانة الانحناء بروز الية pull - out ، وقد تبين وجود نوعين من الربط بين المادة الاساس والمضافات هما : الربط الضعيف والربط القوي، كما تبين بان الصلادة تزداد تزايديا خطيا بتعاقب النسبة المئوية الحجمية للالياف.جاءت قيم النتائج للمحاكاة لمعدل التقشر اعلى من قيم النتائج العملية، وقد فسر ذلك على ان درجة حرارة لهب شعلة الاختبار (الاوكسي _ استيلينية) العملية لم تصل الى درجة الحرارة الشعلة المستخدمة نظريا، بالاضافة الى تاثير السطح البيني للمتراكبات الذي كان ذو متانة وقوة ارتباط عالية، وقيم الكثافة للمتراكبات تدل على ذلك. وظفت الصور الفوتوغرافية بالاقتران مع الصور المجهرية والكثافة للمساعدة في تفسير النتائج.يتضح من النتائج العملية بان المتراكبات المستخدمة في هذا البحث ذات الكسور الحجمية العالية يمكن استخدامها في التطبيقات التي تحتاج الى تشتت حراري كبير، مقاومة عالية للتهرئة، متانةانحناء وصلادة عالية. | In this work, thermal conductivity, K, ablation rate, Ar, bending strength, σf, and Vickers hardness VHs for phenolic (phenol - formaldehyde) resin, PFR type hydroquinone HQR reinforced with different fibers (,E - glass, as mat , and carbon fibers, as continuous) have been studied, in terms of thermal and mechanical properties, which are subject to change in different fibers volume fraction.The composites candidates for this work were two groups; E - glass fibers composites (EGFC), carbon fibers composites (CFC), besides, pure matrix phenolic resin PFR type HQR. Hot - press technique was used to prepare the composites as well as hydroquinone specimens using flash molds at standard conditions.Lee’s disk technique was used to measure thermal conductivity. Oxy - acetylene flame technique was used to determine ablation rate as well as thermal insulator index according to ASTM - E285 - 80. Instron machine was used to measure bending strength according to ASTM - D790.Microhardness Vickers machine was used to determine the hardness according to ASTM - E92 - 82. Simulation programs of heat transfer in three dimensions of ablative test for hydroquinone and hydroquinone composites specimens were carried out using finite difference method.Thermal conductivity results show that K values increase progressively by succession of volume fraction of fibers. Ablation rate behaves inversely, where it drops at high volume fraction of fibers. The thermal conductivity - ablation rate relationship displays two mechanisms. First, associated with the starting of test is recognized by ideal distribution of additives, which leads to thermal dispersion due to the formation of segregated network of thermal conducting paths. Second mechanism is associated with ablation test recognized by shearing cracks appearance, which leads to earlier char production mechanism.Bending strength results show, that σf increases progressively by succession of volume fraction of fibers. The bending strength - volume fraction relationship displays two mechanisms according to the kind of fibers. Where, it can be observed, pullout mechanism with respect to fibers composites. It is shown that there are two kinds of bonding between the matrix and the fibers; weak - bond and strong - bond. The composites were broken through tension down the specimen and compression upper the specimen and shearing fracture mechanism. Hardness Vickers results show that HVs increases progressively by succession of volume fraction of fibers.Ablation simulation results values coming higher than experimental results value. This could be explained as the interface affect of composites, which had high strength and strong bond force, and density values evidence to that.Optical micrographs, coupled with auxiliary microscopy, and densities were employed to aid interpretation of results. The composites under the study can be used in applications, which need high thermal dispersion, high ablation resistance, and high bending strength

تمييز الاهداف عن الخلفية الارضية ذات التماثل الحراري في الحزمتين من الاطوال الموجية [3.5 - 4.1 - µm and 11 - 12 - µm ] == Discrimination of targets from background of similar temperature, using two - channel data in the 3.5 - 4.1 - µm and 11 - 12 - µm regions

Author name: عدي جواد كاظم
Supervisor name: بسعاد هادي حمزة
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: للتمييز بين هدفين او هدف عن الخلفية الارضية استخدمت طريقتان,طريقة حد العتبة وطريقة التصنيف طريقة الحد الاقصى (MLH). تم حساب ( Wλ ) الانبعاثية الطيفية للهدف والخلفية في درجات حرارة مختلفة(T) في اثنين من الحزم الطيفية وبطول موجي μm (3.5 - 4.1) μm(11.0 - 12.0) . وبرسم العلاقة بين دالة التمييز (DF)كدالة لانبعاثية الهدف (target emissivity (εA)) للحزمة وكدالة لدرجات حرارة الهدف. من هذا العمل, التمييز بين الهدف والخلفية الارضية تحت الظروف الجوية المحددة المستخدمة في الموديل الرياضي للحسابات يبين جدوى امكانية كشف الاهداف المختلفة عن الخلفية الارضية بفارق حراري صغير نسبيا.ان تمييز الاهداف بطريقة الكشف الحراري باللاشعة تحت الحمراء يتم من خلال استخدام طريقة حد العتبة والتي تعالج مشكلة الكشف عن الاهداف التي تكون قريبة لدرجة حرارة المحيط ,وذلك بنمذجة الخلفية وباستخدام الموديل الرياضي كقاعدة لتطوير وفهم العمليات الفيزيائية واختلافاتها الامر الذي سيؤدي الى بناء خوارزمية لتعزيز الفرق بين الهدف والخلفية.وبحساب النسبة بين الاشعاع المستلم من الهدف ومن الخلفية، فان افضل تمييز للهدف يكون في حزمتين من الطول الموجي مما هو عليه الحال في حالة استخدام الحزمة الواحدة وخاصة عندما تكون درجة الحرارة للخلفية الارضية والهدف متماثلة..باستخدام احدى طرق التصنيف وهي طريقة الحد الاقصى لتميــــيز الهدف عن الخلفية الارضية في درجات حرارة مختلفة وحزم اطوال موجية مختلفة ومن خلال ملاحظة اقصى كثافة احتمالية . نستنتج ان طريقة الحد الاقصى هي افضل طريقة لتحسين التمييز في نطاق واسع من حزم الطول الموجي في درجات حرارة مختلفة بينما تكون طريقة حد العتبة اسلوب افضل في تحسين التمييز في درجات حرارة مختلفة ولكن في نطاق ضيق من حزم الطول الموجي | To discriminate between two IR targets or target from background two methods are used, the threshold method and the classification method Maximum likelihood Method. we calculate the spectral radiant emittance Wλ for target and background at different temperature (T) in two bands (3.5 - 4.1) μm (11.0 - 12.0) μm. The discrimination function (DF) is plotted as a function of the target emissivity (εA) for bandpass and as a function to target temperature TA in two bandpasses. From this work the discrimination of target from background under selected atmospheric conditions used in the modeling calculation demonstrates the feasibility of detection for target to background in minor temperature differences. Targets discrimination for thermal IR detection is accomplished by using threshold method, which has addressed the problem of detecting targets which are close to ambient temperature. This was done by modeling the background and by using the model as a base for developing an understanding of physical processes and their variations which will lead to the construction of an algorithm to enhance target to background contrast. The present study showed that by ratioing radiance received from target and background better target discrimination is possible using two bands than case from using one bandpass especially when target and background are of similar temperature. Using the Maximum Likelihood Method (MLH) to discriminate target from background in different temperature and different bands will demonstrate the maximum probability density function. Concluding that the Maximum Likelihood Method is to be the best method for discrimination in wide range of wavelength at different temperatures while the threshold method is to be the best method for discrimination at different temperatures but in range of narrow wavelength of bandpasses.

تصنيع دروع واقية من الاشعاع ودراسة بعض خواصها == Manufacture radiation protection shields and study some of its properties

Author name: عبد الرحيم ضياء ابراهيم
Supervisor name: احمد فاضل مخيبر
General topic: Physics
Specific topic: Physics
Degree: Master
Language: Arabic
University location: Baghdad
First pages:
Abstract: تم في هذه الدراسة تصنيع دروع واقية من مواد متراكبة مكونة من الايبوكسي كمادة اساس ومواد تدعيم مختلفة (C, Ni, PbO, Bi) وبنسب تدعيم متباينة % (10, 20, 30, 40, 50) وبابعاد cm (1 X 10 X 10) للوقاية من الاشعاع , ولغرض التعرف على مدى ملائمة هذه الدروع للاستعمال في مجال الوقاية من اشعة كاما, قيست بعض معلمات التدريع مثل معامل التوهين الخطي (μ), والعدد الذري المؤثر (Zeffe), وسمك النصف (X_(1/2)), ومعدل المسار الحر (λ_mean), والثقالة للطاقات KeV (121.8, 344.3, 662, 1773 ,1332, 1408) , بالاضافة الى عامل التراكم عند الطاقة 662 KeV , ولهذا الغرض تم استعمال منظومة كاشف ايوديد الصوديوم NaI (TI) مع مصادر مختلفة Eu - 152, Co - 60, Cs - 137. اظهرت النتائج ان هذه المعلمات تتاثر بتغير نسب التدعيم وطاقة اشعة كاما , حيث تبين ان زيادة نسبة التدعيم للدروع ادى الى زيادة كل من معامل التوهين الخطي والعدد الذري المؤثر. وفي المقابل يحدث نقصان قيم كل منهما خلال زيادة طاقة اشعة كاما للمصدر المستعمل . وبخاصة عند التراكيز العالية % (40, 50), والطاقات الواطئة< 0.662 MeV E_γ حيث سجلت قيم معامل التوهين الخطي cm - 1 (2.1726, 3.6161) للدروع المدعمة بالبزموث بنسبة تدعيم %40 و50% على التوالي ولطاقة 121.8 KeV, ولطاقة 344.3 KeV ولنفس التركيزين ايضا cm - 1 (0.36521, 0.4005) على التوالي, اما عامل التراكم فقد وجد انه يقل بزيادة التركيز عند طاقة معينة. اما بالنسبة لسمك النصف ومعدل المسار الحر فقد وجد ان سمك النصف يقل بزيادة التراكيز وبخاصة عند التراكيز العالية وكذلك الحال بالنسبة لمعدل المسار الحر. كذلك تم قياس قيم الثقالة للدروع كافة بالنسبة لعنصر الرصاص, حيث وجد من خلال قيم الثقالة ان هذه الدروع اخف وزنا من مادة الرصاص, مما يجعلها مفضلة على المواد التقليدية مثل الرصاص والكونكريت. واما بالنسبة لكفاءة الكاشف فقد وجد انها تعتمد في قيمها على مادة الدرع ونوعه وكذلك على قيمة الطاقة المستخدمة. وبينت الدراسة ان هناك توافقا جيدا بين القيم العملية والنظرية. | In this study, protection shields has been preparated , consist of composite materials have epoxy as a basis material and different reinforcing materials (C, Ni, PbO, Bi), with different reinforcing ratios (10, 20, 30. 40, 50) %, and dimensions (1 X 10 X 10) cm to protect from radiation, for examination the suitability of using this shields to protect from gamma ray, some shielding parameters was calculated like Linear attenuation coefficient (μ), Effective atomic number (Zeffe), Half layer thickness (X_(1/2)), Mean free path (λ_mean), and Heaviness for energies (121.8, 344.3, 662, 1773 ,1332, 1408) KeV , in addition to build up factor at 662 KeV, for this purpose sodium iodide system NaI(TI) was used with deferent radiation sources Eu - 152, Co - 60, Cs - 137.The results show that this parameter effected by the reinforcing ratio and gamma ray energy, it was found the linear attenuation coefficient and atomic effective number increases with reinforcing ratio increases, and decreased with energy increasing. Specially with high concentrations (40, 50) % and at low energies E_γ < 0.662 MeV, Since the values of linear attenuation coefficient for shields which reinforcing by bismuth with concentrations (40%,50) was (2.1726, 3.661) respectively for 121.8 KeV, and for energy 344.3 KeV for same concentrations is (0.36521, 0.4005) respectively. The build up factor was found decreased with reinforcing ratio increases, with certain energy.As for the Half layer thickness and mean free path, it was found that the Half layer thickness decreased with energy increasing specially at high concentrations, as well as the Mean free path.Heaviness was calculated too for all shields with respect to lead, from its values, we found that this shields lighter than lead, which make it preferable to traditional material such as lead and concrete.As for the detector efficiency, it was found to be dependent on the type of shield material and the value of used energy which used. This study showed that there is good agreement between the experimental and theoretical values of total attenuation coefficients

تحسين خصائص كاشف ضوئي باستخدام تقنية التنميش الثنائي للسليكون == Improve of photodetecter characteristic using both sides porous silicon technique

Author name: عباس كسوب جار الله الخزرجي
Supervisor name: وسام جعفر عزيز الدجيلي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: الخلاصة تم في هذا البحث دراسة الخصائص الكهربائية والبصرية والتركيبية لاغشية اوكسيد الزنك (ZnO) النقية والمشوبة بالانديوم (In) بنسب مختلفة (1%, 3%) المحضرة بطريقة الرش الكيميائي الحراري, والتي رسبت على قواعد زجاجية وسليكون مسامي بدرجة حرارة (400±10 oC) وبسمك (120±10 nm). قواعد السيليكون المسامي (لجانب واحد وللجانبين) تم تحضيرها بواسطة طريقة التنميش الكهروكيميائيه على رقائق من السليكون (100) .P - Type الكاشف الضوئي (سليكون مسامي/سليكون بلوري/سيليكون مسامي) (PS/c - Si/PS) صنع وحسن بترسيب الاكاسيد الموصلة الشفافة (ZnO/PS/c - Si/PS) و(IZO/PS/c - Si/PS). السيليكون المثقب كان بمسامات دقيقة (pore size > 50 nm) وقطر المسام يتراوح (0.5 - 1 μ m) وزعت المسامات بشكل عشوائي على سطح السيليكون المثقب. الكثافة العالية للمسامات يمكن ان تلاحظ والمسامية تقريبا .(67%) معدل السمك للجانب الامامي (المصقول) (6 μm) وللجانب الخلفي (الغير المصقول) (3 μm) تقريبا. طبيعة السطح للاغشية المرسبة على السيليكون المسامي تكون ذات سطوح خشنة مقارنة مع الاغشية المرسبة على قواعد زجاجية. بينت تقنية حيود الاشعة السينية ان كل الاغشية المحضرة على القواعد المختلفة هي ذات تركيب سداسي متعدد التبلور hexagonal wurtzite)) مع اتجاه تفاضلي سائد(002) ويعرض قمم جديدة اعتمادا على نوع القاعدة كذلك من خلال حيود الاشعة السينية نرى ازاحة في زوايا الحيود وتناقص في الحجم البلوري بسبب التشويب للاغشية المحضرة على قواعد زجاجية من (31.18 nm) الى (12.19 nm). اظهرت صور (AFM) مجهر القوة الذرية طبيعة السطح للاغشية المرسبة على قواعد زجاجية بان الاغشية المشوبة بالانديوم ناعمة ومنتظمة. نعومة الاغشية تتناقص مع تركيز (1%) ثم تصبح اكثر نعومة عند تركيز .(3%) النفاذية كانت عالية جدا للاغشية غير المشوبة والمشوبة بالانديوم لمدى من الاطوال الموجية ( (350 - 850 nm. النفاذية تقريبا (79%) قبل تاثير التشويب ثم تصبح (81 %) مع نسبة تشويب (1%) وتتناقص مع تركيز (3%) الى ( (71% .فجوة الطاقة كانت (3.1 eV),(3.22 eV), (3.21eV) للاغشية (pure ZnO) (IZO 1%) و.(IZO 3%) تتناقص المقاومية (ρᴏ) للاغشية المشوبة في درجة حرارة الغرفة مع زيادة تركيز الانديوم من (1%) الى 3%) ) . نلاحظ من خصائص I - V زيادة التيار الضوئي تحت شرط الاضاءة ونتيجة لزيادة تركيز الانديوم يزداد التيار الضوئي لكل الاغشية. كذلك يزداد التيار تحت شرط الظلام مع زيادة تركيز الانديوم ولكن هذه الزيادة اقل من الزيادة تحت شرط الاضاءة. الاستجابة الطيفية تزداد مع زيادة الطول الموجي لكاشف ضوئي PS/c - Si/PS وتصبح تقريبا (0.69 A/W) عند طول موجي (490), كذلك حسنت الاستجابة الطيفية للكاشف الضوئي بترسيب الاكاسيد الموصلة الشفافة على السيليكون المسامي (ZnO and IZO) بتراكيز انديوم مختلفة. الاستجابة الطيفية لكاشف (ZnO/PS/c - Si/PS) تساوي (0.73 A/W) عند الطول الموجي (385 nm) بينما الاستجابه الطيفية لكاشف (IZO/PS/c - Si/PS) كانت (0.84 A/W) عند الطول الموجي (400 nm). كذلك زمن الاستجابة وزمن الرجوع حسن بترسيب (TCO) . يتناقص زمن الاستجابة من (8 second) لكاشف ضوئي PS/c - Si/PS)) الى (4 second) بترسيب اغشية (IZO) بنسبة تشويب (3%) كذلك يتناقص زمن الرجوع من (6 second) لكاشف PS/c - Si/PS)) الى (2 second) لكاشف (IZO/PS/c - Si/PS). | In this work, structural, optical and electrical properties of have been studied for un - doped and In doped zinc oxide (ZnO) thin films with different indium doping concentrations (1% and 3%) prepared by a chemical spray pyrolysis technique, deposited on glass and porous silicon (PS) substrates at temperature (400±10 oC) with (120±10) nm thickness. The porous silicon substrates (one - side and two - sides) were formed by electrochemical etching of P - type (100) silicon wafers. Photodetector of (PS/c - Si/PS) has been fabricated and improved (ZnO/PS/c - Si/PS) and (IZO/PS/c - Si/PS) by deposited the transmittance conducting oxide (TCO). The porous silicon was macro pores (pore size > 50 nm) and the pore diameter ranging from (0.5 - 1 μ m), which formed by electrochemical etching on p - type (100) silicon wafer, the pores evidently randomly distributed on the porous silicon surface, the high density of pores has been observed and porosity is approximately (67%). The average thickness of front side (polish side) PS was approximately (6 μm) and about (3 μm) of back side (un - polish side). The surface morphology of the thin films deposited on porous silicon was high surface roughness compared with thin films deposited on glass substrates. The X - ray diffraction technique has showed that all prepared films on glass and PS substrates are polycrystalline structures of hexagonal wurtzite with preferential orientation of plan (002) direction and showed the new peaks depend on the substrate type, also from XRD see shifted in diffraction angle and decreased in crystal size by doping for films deposited on glass substrate from (31.18 nm) to (12.19 nm). AFM images showed that the surfaces morphology of deposited films on glass substrates that the IZO films seem smooth and uniform. The roughness of the films decreases with indium concentration 1% and then become very smooth with indium concentration 3%. The transmittance was very high for un - doped ZnO and IZO films within wavelength range (350 - 850 nm). The transmittance about (79%) before the doping effect then become (81 %) with doping concentration (1%) and decreased with doping concentration (3%) about (71%). The energy gap were (3.21eV), (3.22 eV) and (3.1 eV) of (pure ZnO), (IZO 1%) and (IZO 3%) respectively. The resistivity (ρᴏ) of IZO films at room temperature decrease with increasing of indium concentration (1% and 3%) concentrations. I - V characteristics observed the photocurrent increase under the illumination condition and increasing in indium concentration that result to increasing in photocurrent for all films. In the dark condition the dark current also increasing with increasing of indium concentration but this increases less than the increased under illumination condition. The spectral responsivity increased with increasing the wavelength for PS/c - Si/PS photodetector and become about (0.69 A/W) at wavelength (490 nm), also improved the spectral responsivity for the photodetector by deposited the transparent conducting oxide (ZnO and IZO) on porous silicon with different concentration of the indium. The spectral responsivity of (ZnO/PS/c - Si/PS) detector was equal (0.73 A/W) at wavelength (385 nm) while, the spectral responsivity of (IZO/PS/c - Si/PS) detector was (0.84 A/W) at wavelength (400 nm). The response time and recovery time also improved by deposited the (TCO). The response time decreased from (8 second) of PS/c - Si/PS photodetector to (4 second) by deposited IZO films with doping concentration (3%) and recovery time also decreased from (6 second) of PS/c - Si/PS to (2 second) of (IZO/PS/c - Si/PS).

الاستقرارية الفيزيائية - الكيميائية للمتراكبات PVA - MnSO4.H2O مع الظروف الجوية == Physico - Chemical Stability of (PVA - MnSO4.H2O) Composites against weather conditions

Author name: زينب كاظم حمزة
Supervisor name: اسرار عبد المنعم سعيد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذه الدراسه تم تحضير افلام بولي فينيل الكحول وكبريتات المنغنيز المائي باستخدام تقنية الصب مع نسب وزنية مختلفة وهي (2, 5, 10, 15) من كبريتات المنغنيز المائي وقد تم دراسة الخصائص البصريه لها.وقد تضمن هذا العمل ايضا دراسة تاثير الظروف الجوية على الخصائص البصرية لكل النماذج المعرضة.كل النماذج المعرضة وغير معرضة للظروف الجويه شخصت بطرق مختلفة مثل التحليل الطيفي لاشعة تحت الت الحمراء (FTIR)وصور المجهر الضوئي.اظهرت النتائج التجريبية ان طيف الامتصاصيه يزداد بزيادة تركيز كبريتات المنغنيز المائي. فجوة الطاقة تقل بزيادة تركيز الاضافة. وقد تم دراسة الثوابت البصرية الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).بعدتعريض النماذج للبولي فينيل الكحول النقي وللمتراكبات (PVA - MnSO4.H2O) وبتراكيز مختلفه وجد ان طيف الامتصاص يزداد بزيادة فترة التعريض. فجوة الطاقه تقل بزيادة فترة التعريض. وقد تم دراسة الثوابت البصريه الاخرى والتي تشمل (معامل الامتصاص, معامل الخمود, معامل الانكسار, ثابت العزل الحقيقي والخيالي).وقد بين طيف (FTIR) عدم وجود تفاعل كيميائي بين المادة المضافة والبوليمر وليس هنالك تكسر بالاواصر الاساسيه لهما بعد التعريض للظروف الجوية, واظهرت صور المجهر الضوئي ان كل النماذج تصبح اكثر خشونة بعد التعريض. | In this study, (PVA - MnSO4.H2O) films are prepared by using casting technique with different concentration of Manganese (II) sulfates monohydrate (2, 5, 10 and 15) wt.% . Also the optical properties is studied, and this work is involved with study the effect of weathering condition of optical properties for all samples which exposure. All the samples that exposure and unexposure to weather conditions have diagnosed by different methods such as fouirer transform infrared spectroscopy (FTIR) and optical microscope images. The experimental results show that the absorption spectrum increased with increasing the concentration of (MnSO4.H2O). The optical energy gap decreasing with increasing of the concentration of the additive. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. After exposure the samples in the form of pure PVA and (PVA - MnSO4.H2O) composites with different concentration found that the absorption spectrum increases with increases exposure time. The optical energy gap decreasing with increasing exposure time. The optical constants (absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants) are studied. The FTIR shows no chemical interaction between the Polymer and the additives and there are no broken fundamental bands after exposure to the weather conditions. Morphological photographs illustrate that the surface of all films become more roughness after exposure.

تحضير درع متعدد الطبقات وحساب عامل التراكم باستخدام انواع مختلفة مم البوليمرات == Multilayered Shielding Preparation and Buildup Factor Calculation Using Different Type of Polymers

Author name: زهير سالم خميس
Supervisor name: محمد قاسم الفخار | حارث ابراهيم جعفر
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Wasit
First pages:
Abstract: Due to the possibility of producing secondary radiation when a radiation is being attenuated by a certain type of radiation shield, the use of multilayer shielding appears very useful. This study aims to investigate the use of multilayer materials as nuclear radiation shielding.The work presented in this thesis focuses on the possibility of using polymer materials as a nuclear shield. This polymer (high density polyethylene and epoxy) is chosen due to different reasons among which are its local availability, the ease of mixing additives with it, light weight, and flexibility. The polymer as a single shield was investigated, where five different forms of the polymer were used as a single shield. These kind of shield are polymer (High Density Polyethylene HDPE, and Epoxy) alone, HDPE with a 38%by weight of Pb (as an additive), Epoxy with a 33%by weight of Pb, and Epoxy with a 33% by weight of Al (as an additive). The attenuation coefficient (μ), and buildup factor (B) were measured for all five forms and composition. In particular, the attenuation coefficients were found to increase with the increasing of the Pb or Al additive and decrease with gamma rays energy increase, while the buildup factor where decrease with the increase of the Pb or Al additive and increase with the increasing of energy.On the other hands, the multilayer shielding materials were chosen to be either Al or Pb slides (with different thickness) with a slide of 2.8cm of polymer (HDPE or Epoxy) in different repeated combinations. In order to evaluate the values of μ and B for this multilayer composition, the values of μ and B for each Pb and Al were evaluated. Then these two values were estimated for the different combinations of the multilayer shields. In particular, it was found that placing the low Z material (polymer) in front of the detector [NaI(Tl) detector] first and then high Z material before that

تقييم المقاطع العرضية لليورانيوم للتفاعلات المستحثة بالنيوترون == Cross Sections Evaluation of Uranium for Neutron Induced Reactions

Author name: روناك اكرام علي
Supervisor name: ايمان طارق العلوي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: لقد تم في هذا البحث حساب قيم المقاطع العرضية لنظائر اليورانيوم (A=230 - 238) للتفاعلات المستحثة بالنيوترونات التالية ,,,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p)المقاسة بفترات مختلفة من الطاقة حيث ان هذه القراءات تم اخذها من الوكالة الدولية للطاقة الذرية (IAEA ) ومن المكتبات المشهورة عالميا مثل EXFOR, CINDA, ENDF, JEFF, JENDL,ROSFOND,CENDL,WIND, TENDL, BROND, IRDF, EAF وقد تم قياسها في الفترة الاولى من منتصف القرن الماضي وحتى اخر سنوات الماضية .لقد تم تحليل المديات الكاملة للطاقة لكل تفاعل وقد تم اعادة حساب وتقييم المقاطع العرضية ضمن فترات صغيرة مختلفة حسب مديات الطاقة للنيوترون القاصف مع الاخطاء المرافقة لها. قد تم وضع صيغ رياضية لمتعددة الحدود في معظم التفاعلات والتي تربط بين تغيير المقطع العرضي مع الطاقة والتي يمكن استخدامها للتنبىء بقيم المقاطع العرضية غير المحسوبة. لقد تم حساب قيمة Q - للتفاعل وطاقة الربط وطاقة العتبة وفرق الكتلة وعامل الرص لكل تفاعل ولكل عنصر هدف. ان التقييمات اعتمدت بشكل رئيسي على حسابات نموذج الجهد البصري لقد اعتمدت الحسابات على معاملات الجهد البصري النووي حيث تم اختيار وجمع المعلومات من مكتبة (RIPL) التابعة للوكالة الدولية للطاقة الذرية. لقد قمنا بدراسة صيغتين مختلفتين لنموذج الجهد البصري حيث ان الصيغة الاولى تسمى نموذج الجهد البصري القياسي والمعاملات ماخوذة من مكتبة Beijing والصيغة الثانية لنموذج الجهد البصري قد تم حسابها بتحديد ثلاث مديات طاقية. لقد قمنا بدراسة نسبة التفاعل (n,f) لكل نظير من نظائر اليورانيوم نسبة الى يورانيوم - 235 والذي يعتبر نموذج قياسي. لقد قمنا بحساب هذه النسبة لجميع التفاعلات المتوفرة لدينا وليس فقط تفاعل الانشطار واحتسبناها نسبة الى يورانيوم - 235.حساب اخر تم اضافته الى هذه الدراسة وهو دراسة تاثير التلوث لوليدة اليورانيوم - 237 والتي هي نبتونيوم - 237 بعمر نصفي 6.8 يوم وكذلك حساب الفيض النيوتروني لكل منهما. | The cross sections of Uranium isotopes (A=230 - 238) for the (n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), (n,γ), (n,p), (n,t), (n,d), (n,α), (n,2α),and (n,2p) reactions are calculated with different energy intervals which are collected from International Atomic Energy Agency (IAEA). The available cross sections data for the reactions mentioned above are collected from the well known international libraries like EXFOR, CINDA, ENDF, JEFF, JENDL, ROSFOND, CENDL, WIND, TENDL, BROND, IRDF, EAF and measured during the period from the middle of the last century up to several years ago.The cross sections are reproduced in fine steps of incident neutron energy in different intervals with the corresponding errors. The recommended cross sections for all available experimental data have been calculated for all considered reactions mathematical representative equations for all these reactions are formulated. These equations represent the variation of the cross section with energy, which could be used to predict the values of uncalculated cross sections.Q - value, threshold energy, binding energy, mass excess, and packing fraction for each reaction and target element have been also calculated.The evaluations are based mainly on the calculations of the optical model potential. The calculations are based on the nuclear optical potential, where the relevant parameters are collected and selected from Reference Input Parameter Library (RIPL) which is being developed under the international project coordinated by the International Atomic Energy Agency (IAEA). We study two different formula for optical model potential the first formula is the standard optical potential model and its parameters are taken from Beijing library. The second formula is the optical potential with different energy ranges. We study the ratio of the (n,f) cross sections for each Uranium isotopes relative to (n,f) cross section for U - 235 which could be considered as a standard sample. We have done the ratio not for the (n,f) cross sections only but also for other reactions like ,(n,f), (n,tot), (n,el), (n,inl), (n,2n), (n,3n), and (n,γ) relative to U - 235 reactions cross sections.Another evaluation is added to cross sections is the effect of the contamination of the daughter of U - 237 which the daughter is Np - 237 6.8day and their relative flux

دراسة التركيب المتهيج للنوى زوجية - زوجية ذات العدد الذري Z= 50, 48, 46 في المستوى المتهيج الاول == Study of Excited Structure for Even - Even Nuclides of Z = 50, 48, 46 in The First Excited State

Author name: رسل سعد هادي
Supervisor name: فاطمة عبد الامير جاسم
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: درست الخواص الكهرومغناطيسية للنظائر زوجية - زوجية للنوى 48Cd , 50Sn و46Pd الغنية بالنيوترونات من خلال قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ واحتمالية الانتقال المختزل B(E2)W.u ↓ لانتقال اشعة كاما من المستوى المتهيج الاول الى المستوى الارضي. حيث تم حساب قوى الانتقال لرباعي القطب الكهربائي |M(E2)|2 W.u ↓ بالاستعانة بمعدل العمر للمستوى المتهيج الاول والشدة النسبية لاشعة كاما المنبعثة من ذلك المستوى, بينما قيم احتمالية الانتقال المختزل B(E2)W.u ↓ استخرجت من خلال عمر النصف للمستوى المتهيج الاول المصحح لمعامل التحول الداخلي.وللحصول على قيمة دقيقة لانتقال رباعي القطب الكهربائي ↓ E2, تم حساب ورسم القيم المتبناة لكل من |M(E2)|2 W.u ↓ وB(E2)W.u ↓ كدالة لعدد النيوترونات.في هذا البحث, تم تحويل القيم المتبناة لانتقال ↓E2 الى قيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 والتي افادتنا في دراسة تركيب النوى من حيث الاختلاف في الشكل لان عامل التشوه β تم استخراجه من B(E2) ↑ e2b2, كما ان دراسة تاثير عدد النيوترونات على سلوك كل من B(E2) ↑ e2b2 وβ في المتسلسلات الايزوتونية لنوى 48Cd , 50Sn و46Pd يعطي معلومات جيدة حول التشوه في النوى.تركزت دراستنا على ثلاث انواع مختلفة من النوى, الاول بعدد ذري سحري50 , والثاني بعدد ذري شبه سحري 48, والثالث بعدد ذري بين القشرات المغلقة 46.في نهاية العمل الحالي تم عمل مقارنة جيدة للحسابات الحالية لقيم احتمالية الانتقال المختزل B(E2) ↑ e2b2 وعامل التشوه β مع معظم القيم العملية والنظرية الحديثة. | Electromagnetic properties for even - even nuclides in neutron - rich nuclei such 50Sn, 48Cd and 46Pd have been studied through the electric quadruple transition strength |M(E2)|2 W.u ↓ and the reduced transition probability B(E2)W.u ↓for γ0 - transition from first excited state to the ground state. The electric quadruple transition strength |M(E2)|2 W.u ↓ is calculated by using life - time for excited state with the intensity of γ0 - transition, while B(E2)W.u ↓ is extracted from half - life time to state corrected for internal conversion coefficient. To obtain precise value for the transition of E2↓, the adopted value for |M(E2)|2 W.u ↓ and B(E2)W.u ↓ was calculated and plotted as a function for neutron number. In present work, the adopted values for the transition of E2↓ are converted to B(E2)exp ↑ e2b2 which helped us to study the structure for nucleus, such as the variation in shape, because the deformation parameter β is extracted from B(E2) ↑ e2b2 and the study for behavior of each of B(E2) ↑ e2b2 and β versus neutron number in isotonic chains to 50Sn, 48Cd and 46Pd gives good information about the deformation in nuclei. Our study focused on the three different types of nuclei, the first with atomic magic number 50, the second with semi - magic atomic number 48 and the third nucleus with atomic number between closed shells 46. At the end of the present work, the good comparisons for the present calculation to the values of the B(E2) ↑ e2b2 and β with most recent values of experimental and theoretical was done.

تصميم مراة ايونية تعمل كمصحح للزيوغ باستخدام طريقة القيم الحدودية == DESIGN OF ION MIRROR AS AN ABERRATION CORRECTOR USING BOUNDARY VALUES METHOD

Author name: محمد سلام مزاحم العبيدي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:

تصحيح الزيغ بسبب عدم التراصف في العدسات الكهروسكونية == THE ABERRATION CORRECTION DUE TO MISALIGNMENT IN ELECTROSTATIC LENSES

Author name: رؤى تحسين عبد الله الصميدعي
Supervisor name: احمد كمال احمد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: اجري بحث حاسوبي في مجال بصريات الجسيمات المشحونة. يهتم البحث بتصميم منظومات عدسات كهروسكونية بوجود وعدم وجود تاثير عدم التراصف تعمل تحت ظروف تكبير مختلفة.ان توزيع مجال الجهد لعدسه احادية الجهد وعدسة مغمورة كهروسكونية تم تمثيله بدوال تحليلية. تم حل معادلة الاشعة المحورية للمجالات المقترحة لايجاد مسار الجسيمات المشحونة المارة في كل عدسة. ومن توزيع الجهد المحوري ومشتقتيه الاولى والثانية .تم حساب الخواص البصرية كالبعد البؤري والزيغين الكروي واللوني. كذلك تم ايجاد شكل اقطاب كل عدسة كهروسكونية ببعدين وبثلاثة ابعاد. ويعتمد الزيوغ في العدسات الكهروسكونية اعتمادا كبيرا على تراصف الاقطاب، وقد وجد انه عامل مهم يؤثر على الشكل الهندسي لمنظومة العدسة الكهروسكونية. ان نتائج هذه الدراسة لا تبرهن نظريا" امكانية تصميم منظومات عدسة كهروسكونية بزيوغ واطئة فحسب بل تبين امكانية تصنيع مثل هذه العدسات عمليا". | A computational investigation has been carried out in the field of charged - particle optics. The work is concerned with the design of electrostatic lenses with and without misalignment effect operated under different magnification conditions. The potential field distributions of einzel and immersion electrostatic lenses have been represented by analytic functions. The paraxial ray equation has been solved for the proposed fields to determine the trajectory of the charged particles traversing each lens. From the axial potential distribution and its first and second derivatives, the optical properties such as the focal length and spherical and chromatic aberrations have been compute. The electrode shape of each electrostatic lens has been determined in the two - and three - dimensions. The aberration of the electrostatic lens is highly dependent on the alignment of the electrodes and it has been found to be an important parameter affecting the geometry of the electrostatic lens system. The results of this investigation not only prove in theory the possibility of designing electrostatic lens systems with low aberration but also show the possibility of constructing such lenses in practice

تاثير نسب ومعاملات الحزم على دقة تصنيف صور الاقمار الصناعية المتعددة الاطياف == Effect of Band Ratios and Indices on Classification Accuracy of Multispectral Satellite Images

Author name: سيف كامل شنين
Supervisor name: اياد عبد العزيز العاني | صلاح عبد الحميد صالح
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: Multispectral satellite images are holding whole information about the areaunder investigation. Many of digital processing techniques are used to extractmost of the possible information from these images, such these techniques arespectral band ratios, Tasseled Cap transformation and Principle ComponentAnalysis (PCA). These techniques are play good part for features extraction andreducing the number of spectral bands with no loses in information.The research aims to apply classifications on band ratios and image indiceswhich include PCA and Tasseled Cap transformations, of Enhanced ThematicMapper Plus (ETM+) satellite images, and to show how the accuracies of theclassification are differ from the accuracy of classification of the raw ETM+ bandsimages.The results show that the best bands ratios that adopted to represent fiveselected land features are 5/7, 4/5, 2/5, 1/4, and 2/4. Optimum Index Factormethod (OIF) has been adopted on raw bands combinations, and on the bandsratio combinations to select which band combination that contains muchinformation, where the results show that the best combination for raw bands is3 - 4 - 7, and best combination for ratios band is 4/5 - 1/4 - 2/5.Iterative Self Organizing Data Analysis (ISODATA) method has beenadopted as unsupervised classification, and Maximum Likelihood method assupervised classification. The overall accuracies are 87.18%, 89.45%, 89.26%,and 89.52% for raw bands, band ratios, Tasseled Cap, and PCA respectively,which showed that transformation techniques give good spectral enhancementsand feature extraction which are undistinguishable in raw image, and representgood tools to increase the accuracy of classification.

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية == Study Effects of Optical Fiber Bending Loss in Optical Communication System

Author name: دعاء هشام محمد
Supervisor name: سمر يونس الدباغ
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.

محاكات الهوائي الكسوري باستخدام منحني كوج ومينكوسكي == Simulation of Fractal Antenna Using Koch and Minkowiski Curves

Author name: خضير عباس قنبر
Supervisor name: كاظم جواد كاظم الشجيري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: الهوائي عنصر رئيسي في الاتصالات اللاسلكية فهو الادات التي تستقبل وترسل الموجات الكهرومغناطيسية في الفضاء الحر. ان التوسع الهائل في الاتصالات اللاسلكية بحاجة الى هوائيات متعددة الحزم وصغيرة الحجم وبمقطع جانبي منخفض ومن اجل تطوير اداء الهوائيات استخدمت الهندسة الكسورية لتحسين خواصها . والتي تجعل الهوائي متعدد الوظائف . في هذة الرسالة استخدمت تقنية جديدة لتحسين اداء الهوائيات الكسورية ثنائية القطب باستخدام عاكس كسوري متحرك. استخدمت الحقيبة البرمجية 4NEC2 لمحاكاة اول ثلاث تكرارت لهوائيات منحني Koch ومنحني Minkowski قبل وبعد اضافة العاكس الكسوري . ومن اجل تصميم الهوئيات بدقة عالية استخدم البرنامج Adobe illustrator CS4 لرسم جميع الهوائيات المقترحة . ومن نتائج المحاكاة لوحظ ولجميع الهوائيات ان العاكس الكسوري المتحرك حسن من قيمة VSWR (نسبة فولتية الموجة الواقفة) والكسب والتوجية وكذلك زاد الترددات الرنينية المفيدة للتكرارات الثلاثة لمنحني Koch . حيث اضاف تردد رنيني مفيد للتكرار الاول وترددين رنينيين مفيدين للتكرار الثاني وتردد رنيني للتكرار الثالث كذلك اضاف ترددين رنينيين مفيدين للتكرار الثالث لمنحني Minkowski . | Antenna is the main element in wireless communication. It is the instrument which receives and transmits the electromagnetic wave in a free space. The great expand in wireless communications need antennas with multiband, small size and low profile. In order to develop the performance of antennas, fractal geometry is used to optimize the property of the antenna. It makes antenna multi - functional. In this thesis a novel technique is used to optimize the performance of fractal dipole antennas by using a movable fractal reflector. 4NEC2 software package is used to simulate the first three iterations for (Koch curve and Minkowiski curve) antennas before and after adding the fractal reflector. In order to design fractal antennas with high accuracy, Adobe illustrator CS4 software program is used to draw all proposed antennas. From simulation results and for all proposed antennas are observed the movable fractal reflector optimize the value of voltage standing wave ratio VSWR, gain and directivity. Also, it increases the benefit resonant operating frequencies for all three iterations of the Koch curve. It adds one benefit resonant frequency to the first iteration and two benefit resonant frequencies to the second iteration and one benefit resonant frequency to the third iteration. Also, it adds two benefit resonant frequencies to the third iteration of Minkowiski curve

غشاء ZnO - SnO2 وخصائصه التحسسية == ZnO - SnO2) Thin Film and Their Sensing properties

Author name: خالد وليد صابر
Supervisor name: علي جاسم محمد الجابري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: ZnO,SnO2,Zno - Sno2 composite( ل في هذا البحث تم دراسة الخصائص التركيبية والتحسسية على توالي والمحضرة على قواعد قواعد زجاجية بظروف ترسيب مختلفة من نسب المواد (100% : 0%,0% : 100%, 50% : 50%, 30% : 70% , 10% : 90% ) وبدرجة حرارة القاعدة ( 400 & 450 ) سيليزية وبزاوية رش ( 0& 45 ) درجة. بينت فحوصات تقنية حيود الاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)).مع اتجاهيه (002 ) للعينات المحضرة ل) ( ZnO,ZnO : SnO2 compositeما عدا (SnO2 ) فهو ذو تركيب متعدد التبلور من النوع الرباعي ( tetragonal ) مع اتجاهية ( 110 ) ، كما اظهرت النتائج الحصول على التركيب نانوي بمعدل حجم حبيبي ( من 2.4 الى 46 نانو) وتجانس منتظم بواسطة اضافة اوكسيد القصدير الى اوكسيد الزنك ، وهذا اعطى تبلور عالي مع ظروف الترسيب المختلفة. بواسطة تحليل السطح بواسطة المجهر الالكتروني الماسح ( SEM ) ومجهر القوة الذرية ( AFM ) تم التعرف على تاثير ظروف الترسيب المختلفة على خصائص تشكل العينات ، اظهرت صور (SEM ) تراكيب مختلفة مثل الابر والالياف والقضبان السداسية النانوية و(rich particle ) كما اظهرت النتائج التجانس والتوزيع المنتظم والنمو العالي ، كذلك زيادة معدل الحجم الحبيبي وزيادة الخشونة وهذا يقود الى الحصول على مساحة سطحية عالية وتاثير كبير على التحسسية .كل القياسات التحسسية اظهرت تحسسية عالية عند درجة حرارة القاعدة ( 450 ) سيليزية بزاوية رش (45 ) درجة ونسبة (SnO2 50% : % 50 ZnO) وعند زيادة نسبة ( ZnO ) لتصبح (100 % ) فان التحسسية تقل. ان العامل المؤثر على التحسسية هو نسبة المواد الداخلة في تركيب الاغشية الرقيقة كافضل نسبة حجمية 50)٪ 50 : ٪( وعند زيادة نسبة لتصبح 100٪ اوكسيد الزنك فان التحسسية تقل . اوكسيد الزنك لديه تحسسية عالية، ولكن عندما يخلط مع SnO2، وهذا يؤدي الى زيادة تحسسية وهذا واضح من خلال النتائج المستحصلة. | In this work, structural and sensing properties have been studied for ZnO, SnO2 compound and ZnO - SnO2 composite thin films. They were prepared by spray pyrolysis technique deposition at substrate glass, were used different deposition conditions, volume ratios(100% : 0%, 0% : 100%,50% : 50%, 70% : 30%, 90% : 10%,), Substrate temperature ( 400)&(450) oC , incident angle spray of spray pyrolysis (0) & (45) .. The X - ray diffraction technique has showed that all prepared films are polycrystalline structure with hexagonal type that preferred orientation of plan (002) direction for all thin film prepared for ( ZnO compound, ZnO - SnO2 composite thin films) except SnO2 thin films are polycrystalline structure with tetragonal type with preferred orientation of plan (110) , the results obtained by X - ray diffraction showed that we get the installation of nano structure with average grain size between ( 2.4 to 46 nm) and uniform Homogeneity by added tin oxide to zinc oxide, the results show high crystalline with deferent conditions deposition. Surface analysis by SEM and AFM have been used to understand the effect of the different conditions deposition on morphology properties of the samples. The SEM micrographs show needle - like, fiber - like , hexagonal nano rods, rich particles ( high growth) and homogeneity , uniform distribution, high growth. The results showed an increase of the average grain size with increasing roughness and this leads to obtain a high surface area and large effect on sensitivity. Overall measurements sensing showed that the highest of sensitivity at substrate temperature (450 oC) ,incident angle spray pyrolysis (45) with ratio ( 50% : 50%) . The influencing factor on sensitivity is the ratio of materials involved in the structure of thin - film as the best volume ratio its (50% : 50%) and when you increase the ratio to become 100%ZnO the sensitivity decreases. ZnO has high sensitivity, but when mixed with SnO2, this leads to increase sensitivity and this is clear from the results that were obtained.

قياس تراكيز غاز الرادون ووليداته وتقييم التعرض في ابنية كلية العلوم في الجامعة المستنصرية == Measurement of Radon and Daughters Concentrations and Exposure Assessment in the Buildings of the Science College at AL - Mustansiriyah University

Author name: حيدر عيد فاضل
Supervisor name: ايمان طارق العلوي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The concentrations of Radon gas and their progeny have been measured in the building of Al - Mustansiriyah University College of Science. Deanship building, four flowers, includes dean office and administrative staff in addition to the department of mathematics, department of biology, lecture rooms and laboratories affiliated in addition to the basement of the Deanship building, building of department of chemistry libraries, building of department of physics libraries, and building of meteorology or atmospheric Science (in which the detectors have been suspended, but most of them had been lost because of the maintenance work, which cooperated with the preparation of this study).The nuclear track detector of solid state CR - 39 technique has been used to study the trace effect. 356 detectors have been suspended and distributed (two detectors) in each location under study. Detectors with 1cm x1cm area have been suspended with two heights; the first height represents the sit down mode and the second represents the standing mode, for a period of 90 days except those for the department of chemical libraries because of an official holiday in the Al - Mustansiriyah University.The dosimeters have been design to be adequate for the research environment. The samples are collecting after exposing time for the period mentioned above, then applying the chemical etching and Statistics numerical process the density of the nuclear has been calculated in order to calculate the concentrations of Radon and their daughters. The calibration process has been made in this work by exposing other detectors (similar of that used for the detecting) to Radium - 226 source with known activity radiation.It was found that all concentrations are within the world wide limits. It has been found the Radon concentrations in the basement of Deanship building are relatively higher than in other location have been observed. These concentrations are decreasing gradually with height to reach the lowest value at the fourth floor. It strengthens that the Radon gas is heavier than air. The yearly effective dose of the exposure to Radon has been calculated. The Radon concentration is within the world wide permissible limits.

تحضير تراكيب نانوية للزنك اوكسيد بطريقه السول - جيل

Author name: تغريد سعدون محسن
Supervisor name: رعد سعدون صبري | محمد جاسم محمد حسن
General topic: Physics
Specific topic: Physics
Degree: Master
University: University of Baghdad
Language: English
University location: Baghdad
First pages:
Abstract: تم في هذا البحث دراسة الخصائص التركيبية ,البصرية ,الكهربائية والتحسسية للاغشية (ZnO) النقية والمشوبة بالسيريوم (Ce) بالنسب % (3,5,10) المحضرة بطريقة السول - جيل, والتي رسبت بطريقه السبن كوتنك على قواعد زجاجية وملدنه عند درجات الحراره (350,500,550˚C) للاغشيه النقيه و(˚C550 ) للاغشيه المشوبه وبسمك (315.5)nm.بينت فحوصات نمط الحيود للاشعة السينية (XRD) لتشخيص طبيعة تبلور الاغشية المحضرة, حيث اظهرت النتائج ان جميع الاغشية المحضرة ذات تركيب متعدد التبلور من نوع سداسي hexagonal)), كما تبين من نتائج التشويب ان زيادة التشويب تؤدي الى النقصان في الحجم الحبيبي حيث تناقص الحجم الحبيبي من (37.1) الى (27.0) في حالة التشويب بنسبة ,10%, ومن خلال قياسات ماسح القوة الذرية AFM تبين ان خشونه السطح تزداد بزياده نسب التشويب من القيمه (1.14) الى القيمه 2.15)) عند النسبه 10 % ,ومن قياسات المجهرالالكتروني الماسح SEM تم التعرف على نوع التراكيب ففي الاغشيه النقيه ظهرت التراكيب ذات جسيمات نانويه كرويه الشكل موزعه بصوره منتظمة ومتجانسة ,بينما الاغشيه المشوبه كانت التراكيب الناتجه شبيه بالالياف وعلى شكل شبكه تجاعيد (متغصن ). وقد تم دراسة الخواص البصرية لاغشية اوكسيد الزنك النقية (ZnO) والمشوبة بالسيريوم (ZnO : Ce) على دراسة طيف النفاذيه (T᷊) لاغشية المحضرة حيث بينت النتائج ان اعلى نفاذيه تم الحصول عليها هي(95%) عند الاغشية النقيه بينما كانت النفاذيه للاغشية المشوبة %(65 - 40) ولمدى اطوال موجيه350 - 900) nm.) , وتبين ايضا ان الامتصاصية بشكل عام تزداد بزيادة نسب التشويب لتصل اعلى قيمة عند النسبه10% بزيادة نسبة التشويب. تم حساب فجوات الطاقة البصرية للاغشية النقيه والمشوبه وتبين ان فجوة الطاقة تزداد قليل بزيادة نسبة التشويب الى ان تصل الى اعلى قيمة عند نسبة التشويب (10%). وكانت فجوة الطاقة ( (Eg تتراوح من (3.219 eV) الى (3.232eV) بزيادة نسب التشويب. اظهرت القياسات الكهربائية ان التوصيلية الكهربائية المستمرة تزداد بزيادة نسبة التشويب ثم تقل عند النسبه 10 % مع زيادة نسبة التشويب . وبينت القياسات ان الاغشية كافة تمتلك طاقتين للتنشيط (Ea1) و(Ea2) تقل قيمتهما بزيادة نسبة التشويب. كما بينت خصائص(photoconductivity) ان الاغشيه تمتلك ربحيه مقدارها (2.357) للاغشيه النقيه و(1,1.666,1)للاغشيه المشوبه عند النسب (3,5,10 )%على التوالي . اما خصائص التحسسية لجميع الاغشية المحضره كانت تقاس بعد تعريضها الى ( (100,150,200 ppm) من ال( NH₃و( NO₂ عند درجه حراره الغرفه . النتائج العملية بينت ان اغشية اوكسيد الزنك المشوبة بالسيريوم والمرسبة على قواعد زجاجية تحسن التحسسية لتلك الاغشية للغاز ( NH₃و ( NO₂ كما تبين ان افضل نتيجة سجلت كانت للاغشية المشوبة بنسبة 10 % حيث كانت (17%) للغاز NO₂ و(16.66%)للغاز NH₃عند 300 درجه مئويه في حين كانت افضل نتيجه للاغشيه المشوبه بنسبه (%3 و%5) حيث كانت (12.6 %) للغازNO₂ و(10.31%) للغاز ,NH₃ 14%)) للغاز NO₂ و(13.28 %) للغاز NH₃ على التوالي عند 200 درجه مئويه . بالاضافة الى ذلك تبين ان التحسسية لها علاقة نسبية لدرجات الحرارة وكمية الغاز. | In the present work, structural, optical, electrical and sensing properties have been studied for undoped and Ce doped zinc oxide (ZnO) thin films with different cerium doping concentrations (3 ,5 and 10) % prepared by a Sol - gel method with spin coating , deposited on glass substrate at annealing temperature (350,500 and 550 )˚C for the pure thin film , 550 ˚C for doped thin film with (350±10) nm thickness, The X - ray diffraction technique has showed that all prepared films are polycrystalline structure type of hexagonal wurtzite, The doping resulted in decreasing grain size deteriorates the crystalline of the films from (37.1nm) of pure ZnO to (27nm) of ZnO : Ce at (10 %) doped. Surface analysis by AFM have been, the roughness increased with increasing the cerium concentration in the films from (1.14) to (2.15) at 10 % , From FE - SEM have been identified the structures in the thin film pure, spherical nanoparticles distributed a regular basis and homogeneous, while doped thin film were shapes like fiber and a wrinkle network. The measurements of optical properties transmittance of undoped and Ce doped ZnO films showed higher transmittance was (95%) for undoped ZnO films while (65 - 40% ) for doped Ce films within wavelength range (350 - 900nm). In addition, the results have showed the absorbance increased with increased doping to reach maximum value at 10% concentration. The energy gap of ZnO was calculated for undoped and doped films .It is noticed that the energy gap increases slowly with the increased of doping until it reaches the highest value at 10% doping concentration , and the energy gap ranging from (3.219) to (3.232) with increased doping concentration.The results of electrical properties have showed that direct current (D.C) conductivity increases then decreases by increasing doping to reach maximum value at 10% doping concentration. The results have showed that the films have two activation energy Ea₁ and Ea₂. From (photoconductivity) characteristics it has found that the gain factor (2.357) for pure ZnO and (1, 1.666, 1) for ZnO : Ce at (3, 5 and 10) % Respectively.The sensing properties for all undoped and Ce doped films were measured after films surface was exposed to (100,150 and 200) ppm for NH₃, NO₂ gas at room temperature. The experimental results of Ce doping of zinc oxide thin films with different cerium doping concentrations (3,5 and 10) % which deposited on glass substrate ,sensitivity of thin film sensor elements was investigated in this work. Therefore that the sensitivity of all the samples increases with the increasing in the operating temperature, reaching a maximum value corresponding to an optimum operating temperature which is 300°C for sample (10 %) and 200 °C for samples (3 % ,5 %). In addition ,the sensitivity is directly proportional with the operation temperature for limited range. In general , the sensitivity increases by increasing the concentration of NH₃, NO₂ with increasing temperature degree.

دراسة نظرية للحاصل الفوتوني لتفاعل كوارك - كوارك == Theoretical Study of Photon Yield at Quark - Quark Interaction

Author name: ايناس جاسم محسن ولي
Supervisor name: هادي جبار مجيبل العكيلي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تمت دراسة حاصل انتقال الفوتونات في تفاعل الكوارك - كوارك نسبة لتبادل الكلون وبدرجات حرارة عالية بالاعتماد على النظرية الكمية اللونية. انصبت هذه الدراسة على حساب معدل الانتقال الفوتوني والناتج بعملية الفناء للنظام الكواركي باستعمال نموذج بسيط لتفاعل الكوارك - كوارك وفقا للنظرية الكمية اللونية ونظرية الاضطراب باستخدام الاعتبارات الكمية. تم تحديد المعدل الكلي لانتقال الفوتونات الناتجة لعملية الفناء وحسابه كدالة لثابت الاقتران وزخم الانتقال وطاقة الفوتون ودرجة الحرارة الحرجة والطاقة الحرارية للنظام. احتمالية معدل انتقال الفوتون حسبت باستعمال قيمتين للطاقة الحرارية الحرجة Tc=144MeV وTc=170MeV مع عدد من قيم الطاقة الحراريةT=125MeV وT=188MeV وT=250MeV وT=310MeV نسبة الى زخم الانتقال. ان التقريب من الدرجة الاولى للنظرية الكمية اللونية ولفناء الكوارك - الكوارك المضاد تشير الى التباعد الاسي لمعدل الفوتونات العائدة لتفاعل كوارك - كوارك. وفقا لنظرية الاضطراب في درجات الحرارة العالية يتبين لنا تاثير الطاقة لتبادل الكلون على ظاهرتي كل من الحبس اللوني والتقارب الحر والتي توفر معدلات محددة. في هذه الاطروحة تظهر النتائج اثنين من السلوكيات المتميزة لتفاعل الكواركات وهي صفة الحبس والتقارب الحر اعتمادا على ثابت الاقتران. معدل الانتقال الفوتوني يزداد بتناقص ثابت الاقتران وبتناقص طاقة الفوتونات مع زيادة الطاقة الحرارية وانبعاث الفوتونات يكون كبير. من جهة اخرى فان معدل انتقال الفوتون يتناسب مع الطاقة الحرارية الحرجة ويزداد معدل انتقال الفوتون مع زيادة الطاقة الحرارية للنظام ويقل مع زيادة زخم الانتقال . | The transition of photons from a quark - quark interaction due to exchange gluon at high temperatures have been investigated and studied according on quantum chromodynamic theory QCD. This study focuses on the evaluation of the photon transition rate production in an annihilation processes for quarks system using a simple model of quark - quark interaction according on quantum chromodynamic theory and perturbation theory using a quantum consideration. Specifically, the total photons transition rate production at annihilation processes is evaluated as a function of the running strength coupling scaled ,momentum transfer P, photon energy E_γ, critical temperature Tc, and thermal energy T for system. The probability of photon transition rate ζ(α_s,E,T) have been evaluated using two values of critical temperature Tc =144 MeV, and Tc =170 MeV with many values of thermal energy T =125 MeV, T =188 MeV, T=250 and T =310 MeV relative to momentum transfer P=1 to 5 GeV. At first order approximation the quantum chromodynamic theory for quark - antiquark annihilation indicates to exponential divergent of photons yield rates for quark - quark interact. According to the perturbation theory at high temperature we show that effects of energy to the exchanged of gluon on the confinement and asymptotic freedom provide finite rates. In this thesis, results exhibit the two distinct behaviors of quarks state interaction which are described as confinement and deconfinement depending on the running coupling strength α_s (T). The rate transition of photons is increasing at decreasing of running coupling strength α_s (T) and decreases of the photon energy E_γ, with the increase of thermal energy T and emitting photon would be large. On the other hand the photon transition rate proportional to the critical temperature and the photon transition rate increase with the increase of the temperature and decrease with the decrease of momentum transfer

التوصيلية الضوئية للمفرق الهجين a - GaAs : Zn/c - Si == Photoconductivity of a - GaAs : Zn/c - Si Heterojunction

Author name: ايمان كاظم جبر
Supervisor name: حسين خزعل رشيد | رامز احمد الانصاري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: حضرت اغشيه زرنيخات الكاليوم المشوب بعنصر الزنك بنسبة 1% GaAs : Zn باسماك مختلفة mµ(1.0 ,0.75 ,0.5 ,0.25) بتقنية التبخير الوميضي على ارضيات زجاجية ورقائق من c - Si بدرجة حرارة الغرفـة وتحت ضغط فراغي 10 - 5 mbar وبمعدل ترسيب مقارب الى 0.92Å/s لدنت هذه الاغشية بدرجات حرارة تلدين مختلفة K(373, 473 ) لمدة ساعة واحدة ولدراسة الخواص التركيبية تم تلدين اغشية زرنيخ الكاليوم المشوبة بالزنك والمرسبة على الزجاج بسمك mµ0.5 الى درجة حرارة and773)K473,373).تم دراسة الخواص التركيبية للاغشية المحضرة على ارضيات زجاجية بواسطة حيود الاشعة السينية XRD وقد اظهرت نتائج حيود الاشعة السينية ان الاغشية الملدنة بدرجة حرارة اقل من 473K ذات تركيب عشوائي وبزيادة درجة حرارة التلدين اصبح التركيب متعدد التبلور F.c.c عند درجة حرارة 473K وبالاتجاه المفضل (111) ,اما دراسة خصائص السطح المورفولوجية بواسطة مجهر القوة الذري (AFM) , فقد وجد ان خشونة السطح تقل مع زيادة درجة الحرارة التلدين وتزداد مع زيادة السمك اما الحجم الحبيبي فوجد انه يزداد مع زيادة درجة حرارة التلدين والسمك.درست الخصائص الكهربائيــة للاغشية المحضرة على ارضيات زجاجية بتغير السمك ودرجة حرارة التلدين حيث ازدادت التوصيلية الكهربائية المستمرة (2.05 - 59.3) 10 - 3 (.cm) - 1 لجميع الاغشية المرسبة بزيادة السمك وبدرجة حرارة الغرفة قلت (15.1 - 2.39) 10 - 3 (.cm) - 1 بزيادة درجة حرارة التلدين من (RT - 473)K للاغشية ذات سمك 0.5mm، قلت طاقات التنشيط الكهربائية (Ea1& Ea2)بزيادة سمك الغشاء وزادت بزيادة درجة حرارة التلدين (RT - 473)K. اظهرت قياسات التوصيلية المتناوبة لاغشية الـ GaAs : Zn باسماك مختلفة وبدرجات حرارة تلدين مختلفة بانها تنطبق مع نموذج تنطط الحاجز المرتبط(CBH) . وبينت قياسات هول الى ان جميع الاغشية هي من النوع (p - type)، وتركيز الحاملات يزداد - 89.29 )×1016 cm - 3 (0.08 بزيادة سمك الغشاء وتقل (1.95 - 0.21)×1016 cm - 3 بزيادة درجة حرارة التلدين (RT - 473)K. وكذلك لاحظنزايادة قيم التحركية بزيادة درجة حرارة التلدين ,بينما تقل مع زيادة السمك.اظهرت القياسات البصرية لاغشية a - GaAs : Zn بان الانتقالات البصرية كانت مباشرة مسموحة ذات فجوة طاقة تزداد مع زيادة درجة حرارة التلدين بينما تقل مع زيادة السمك.قيست سعة الانحياز العكسي للمفرق الهجين a - GaAs : Zn/c - Si كدالة لفولتية الانحياز وبتردد 100KHz وقد دلت هذه النتائج على ان المفرق من النوع الحاد، لوحظ تناقص السعة بزيادة جهد الانحياز العكسي، وايضا لوحظ ان السعة تقل بزيادة سمك الغشاء وتتناقص مع زيادة درجة حرارة التلدينF/cm2(2.24 - 1.54) للسمك 0.5µm. وجد ايضا ان جهد البناء الداخلي للمفرق يتناقص 0.15)Volt (0.40 - عند زيادة السمك .درست خواص تيار - فولتية للمفرق الهجين a - GaAs : Zn/c - Si تحت ظروف الظلام وقد وجد بانها تتفق مع نموذج اعادة الاتحاد - الاختراق ، كذلك اظهرت النتائج ان كثافة التيارتقل بزيادة درجة حرارة التلدين وسمك الغشاء وذلك بسبب زيادة العيوب عند سطح المفرق. وعامل المثالية يزداد بزيادة سمك الغشاءمن(2.4 - 2.7). ومن خلال قياسات تيار - فولتية تحت ظروف الاضاءة وجدنا ان كثافة التيار الضوئي يزداد مع زيادة درجة حرارة التلدين ويقل مع زيادة السمك.درست خواص كثافة تيار الدائرة القصيرة وفولتية الدائرة المفتوحة حيث وجدنا ان ,Jsc Voc, تزداد قيمهم بزيادة درجة حرارة التلدين | GaAs weight doping percentage by 1% Zinc (GaAs : Zn) films have been deposited by flash evaporation technique on glass and c - Si wafer substrates at room temperature under vacuum of 10 - 5 mbar with rate of deposition near to 9.25Å/sec. These films of different thicknesses (0.25, 0.5, 0.75, 1.0) µm have been annealed at different temperatures Ta (373, 473)K for to study the properties of structure of a - GaAs : Zn films that deposited on glass substrate with thickness 0.5 µm annealed at (373, 473 and 773)K. The structural characteristic of the films prepared on glass substrates have been studied by using X - ray diffraction, which shows that the films have amorphous structure for sample annealed at Ta> 473K. The samples annealed at 473 K showed a polycrystalline with Face - Center cubic system preferred orientation along (111).The surface morphological characteristics were studied by atomic force microscope (AFM) which show that decreased in surface roughness with increasing annealing temperature and increased with thickness increases. The grain size increases with increasing annealing temperature and thickness.Electrical properties of the films prepared on glass substrates were studied with different thicknesses and annealing temperatures. The D.c conductivity for all deposited films increases from (2.05 to 59.3) 10 - 3 (.cm) - 1 with thickness increases at room temperature and decreases from(15.1 to 2.39) 10 - 3 (.cm) - 1 with increase of annealing temperature from RT to 473K for films of 0.5m. The electrical activation energies Ea1and Ea2 decrease with thickness increases and increasing with increasing of annealing temperature from room temperature to 473K. A.C conductivity measurements for GaAs : Zn films with different thickness and annealing temperatures were consistent with correlated barrier hopping model (CBH).Hall measurements showed that all the films are p - type with carrier's concentration increasing from( 0.08 to 89.29)×1016 (cm) - 3 with film thicknes increase and decreasing from (1.95 to 0.21)×1016 (cm) - 3 with increasing of annealing temperature from room temperature to 473K. Also we observe that the mobility values decreases with thickness increases and increasing with increasing of annealing temperature. The optical measurement showed that the nature of the optical transition has been direct allowed with band gap energies increases with increasing of annealing temperature while decreases with increases of film thickness.The reverse bias capacitance for a - GaAs : Zn/c - Si heterojunction was measured as a function of bias voltage at frequency 100 KHz, and it is indicated that these heterojunction are abrupt. The capacitance decreases with increasing the reverse bias voltage, also decreasing with increasing annealing temperatures from (2.24 to1.54) ×10 - 7 F/cm2 for film thickness 0.5 µm and with increasing film thickness.The value of built - in potential for heterojunction decreases from (0.4 to 0.15) Volt with increasing of thickness.while increases with increasing temperature from (0.3 - 0.4) Volt for film thickness 0.5 µm.The J - V characteristics of the a - GaAs : Zn/c - Si heterojunction under dark have been studied under dark condtion. This may be in agreement with tunneling recombination model. Furthermore, the product shows that the current density decreases with the increasing of annealing temperature and film thickness for the increases in the defects at heterojunction interface. The ideality factor increases with the increasing film thicknes from (2.4 to 2.7). Under illumination, the photocurrent density increases with increases of annealing temperatures and it decreases with the increases of thickness. The short - circuit current density and open - circuit voltage have been studied where the Jsc ,Voc , increase with the increasing of annealing temperatures
1 ... 62 63 64 65 66 ... 122