Show: 25 50 75 100 Results

Search results: 25 out of 771

ازالة المحتوى الكبريتي بالاكسدة العميقة باستخدام الكاربون المنشط المحفز == Deep Oxidative Desulfurization Using Catalyze Activated Carbon

Author name: ياسمين منذر جاعد
Supervisor name: ودود طاهر محمد
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: ازالة المحتوى الكبريتي من الوقود هي قضية بيئية حاسمة على نحو متزايد. عملية الهدرجة(HDS) تزيل المركبات الكبريتية مثل المركبتان والكبريتيد من الهيدروكربونات، ولكن بعض الكبريت - يحتوي على مركبات (مثل dibenzothiophene) من الصعب جدا ازالتها وتحتاج عمليات عميقة | Removal of sulfur species from fuels is an increasingly critical environmental issue. Hydrodesulfurization (HDS) removes sulfur compounds, such as mercaptans and sulfides from hydrocarbons; however, some sulfur - containing compounds (such as dibenzothiophene) are very difficult to remove and need deep desulfurization processes.This work was applied to the desulfurization diesel fuel produced from the conventional HDS process or ultra - desulfurization. The used fuel types were either real diesel fuel or simulated diesel fuel, where sulfur - containing compound (dibenzothiophene) converted to its corresponding sulfone by oxidation using hydroperoxide as an oxidant and formic acid as cocatalyst with activated carbon (AC), in addition to its adsorbent virtue. Simulated diesel fuel according to British Petroleum 200B doped with dibenzothiophene was prepared.The experimental study was divided into two parts, preliminary study, that include thermally (activated carbon with heat treatment (ACH)) and chemically treatments (i.e. activated carbon impregnated with copper (Cu/AC), activated carbon impregnated with nickel(Ni/AC), activated carbon impregnated with copper and nickel (Cu - Ni/AC) and activated carbon with nitric acid treatment (ACN) ) to the parent activated carbon, these types were tested at different operating conditions (i.e. temperature = 25 and 60 ?C, pH=2, H2O2/diesel fuel ratio=3/100 and activated carbon doses = 0.7 and 1.0 g) to achieve the best one that gives higher desulfurization efficiency. ACM that is a mixture of ACH and ACN (equal percentage) gives 80% sulfur removed at operating conditions of temperature= 60 ?C, pH=2, H2O2/diesel fuel ratio=3/100 and ACM doses = 0.7 g. In general, the activity of activated carbons as follows ACM >ACN > ACH > Ni/AC > Cu/AC > Cu - Ni/AC > parent AC While, the second part represents the main study, that deals with the desulfurization process in details, using ACM with operating conditions of temperature of 60 - 80 ?C, pH of 0 - 4, H2O2/diesel fuel ratio of 3/100 to 7/100 and ACM doses of 0.5 to 1.0 g Maximum desulfurization efficiency achieved was 92.3% at operating conditions of temperature= 80 ?C, pH =0, H2O2/diesel fuel ratio= 5/100 and ACM dose =1.0 g.Finally, two experiments with the best conditions above were done on the real diesel fuel. Maximum desulfurization efficiency was 25% at temperature= 80 ?C, pH =0, H2O2/diesel fuel ratio= 5/100 and ACM dose =1.0 g.

معالجة مياه المصب العام للحقن في حقل الناصرية النفطي == Water Treatment of Main Outfall Drain For Injection In Nasiriyah Oil Field

Author name: جعفر جبار مدلول
Supervisor name: احمد فائق العلوي
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: يهدف العمل الحالي لانتاج مياه ملائمة للحقن في حقل الناصرية النفطي من المصب العام يتكون الجزء العملي من هذا البحث من ثلاثة مراحل(1) التخثير/ التلبد , (2) مرشح ماء الجاذبية الطبيعية او غشاء دقيق و(3) تقنية اغشية النانو. المرحلة الاولى, تخلص عملية التخثير/ | The aim of the present work is to produce water appropriate for injection in Nasiriyah oil field from Main Outfall Drain (MOD). The experimental work in this research consists from three stages (1) coagulation/ flocculation, (2) natural gravity water filter or microfiltration membrane (MF) and (3) nanofiltration membrane (NF) technology. The first stage, coagulation/flocculation process removed the suspended solids from MOD and reduced the turbidity to the demand limits. The variables studied were initial turbidity (11.8 - 100 NTU), coagulant dosage (0 - 55 ppm), speed of the slow mixing step in the jartest apparatus (2nd step) (20 - 40 rpm), time of 2nd step (20 - 40 min), and settling time (10 - 50 min). Turbidity increases by increasing initial turbidity and decreases by increasing the coagulant dosage, speed and time of 2nd step and settling time until the reaching to the optimum for them at the minimum turbidity, then any increasing of the coagulant dosage, speed and time of 2nd step will increase the turbidity, while any increasing of settling time will do no effect on turbidity. The optimum dosage for alum was 35, 40 and 50 ppm. While, for ferric chloride it was 15, 20 and 30 ppm and for polyelectrolyte 4, 8 and 10 ppm for 11.8, 30 and 100 NTU initial turbidity respectively. The optimum speed of 2nd step was 25 rpm for each of alum (35 ppm), ferric chloride (15 ppm) and polyelectrolyte (4 ppm). While the optimum time of 2nd step was 30 min for each of alum (35 ppm), ferric chloride (15 ppm) and polyelectrolyte (4 ppm) and settling time was 30 min for each of alum (35 ppm), ferric chloride (15 ppm) and polyelectrolyte (4 ppm). The second stage, natural gravity water filter or microfiltration MF was used to ensure that the particle size was in the demand limits (less than 10 ?m) and reduce the turbidity and the total suspended solids (TSS) to the demand limits (5 NTU and 3 - 3.5 mg/l). It was found that turbidity and TSS increases by increasing the inlet turbidity and TSS and the results was arranged progressively as the following : Natural gravity water filter ? 5 ?m MF ? 1 ?m MF. The final stage, nanofiltration NF membrane technology was used to remove sulphate from MOD. The variables studied were feed concentration (1800 - 9630 mg/l) and operating temperature (27 - 37 oC). Also concentrate recirculation was used to obtain high recovery percentage of water can be inject. It was found that product flow rate increases by increasing temperature and decreases by increasing salts concentration in feed. Also it was found that salts concentration in product increases by increasing feed concentration and temperature. Rejection percentages were (94.475 - 95.631 %), (88.088 - 90.714 %), (83.33 - 93.2 %), (85.116 - 92.727 %) and (65.385 - 72.727 %) for sulphate, total hardness (TH), Ca2+, Mg2+ and Cl - respectively and recovery percentage of product water was (11.429 - 38.143 %) for polyamide membrane (TFC). In the case of concentrate recirculation, feed concentration, permeate concentration and volume of permeate increases with increasing in operating time and 12.69 liter of water valid for injection in oil field was recovered from 25 liter feed after 180 minute.

تسريع انتاج الخل بالطريقة المستمرة == Speeding - Up The Production of Vinegar By Continuous Ferementation

Author name: خليل عيدان حمد الدليمي
Supervisor name: عبد القهار مهدي محمد السامرائي
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: Tikrit University - College Of Engineering - Department Of Chemical Engineering
Language: Arabic
University location: Salahaddin
First pages:
Abstract: تمت الدراسة على جهاز تخمير ريادي؛ باستخدام الطريقة المستمرة في انتاج حامض الخليك ومن ثم اجراء تقييم للظروف المثلى في عملية الانتا م في هذا البحث دراسة تاثير المتغيرات (معدل تدفق الهواء, وسرع المزج, ودرجة الحرارة ,والدالة الحامضية (pH ), وتركيز الاوكسجين ا | The research has been achieved by means of fermentation system by Continuous method to produce acetic acid and then evaluation of the optimum condition of production process. This research aims to study the effect of some operation variables like (air flow rate, speed of mixing, temperature, acidic function ( pH ) , and dilution rate of alcohol ) , on acetic acid production. The operation conditions that worked are (air flow rate ( 1 - 4) m3 / hr ) , speed of mixing( ( 50 - 400) rpm ) temperature (( 18 - 33)C? ) , and dilution rate ( ( 0.005 - 0.02) hr - 1 )). The optimum operating conditions to produce acetic acid by continuous process are as follow : (air flow rate ( 3 m3 / hr ) ,speed of mixing (100 rpm) , temperature ( 30 C? ), dilution rate of alcohol(0.005 hr - 1) initial alcohol concentration ( 48 g / l ) and initial concentration of acetic acid ( 40 g / l )).. The biological variables of acetic acid bacteria have been studied in the fermentation process in continuous method ( concentration of living mass , consumed alcohol , the produced acetic acid and the dissolved oxygen concentration) in addition to the lateral variables of the process ( aeration flow rate, speed of mixing , temperature , function of acidity and dilution rate ) as algebraic differential equations Mathematical models of the continuous process of fermentation process (used as simulation solutions).

معالجة عناصر الخارصين والنحاس والمنغنيز في مياه الفضلات الصناعية بطريقة الترسيب الكيمياوي == Treatment of Zinc ,Cupper And Manganese In Wastewater By Chemical Precipitation

Author name: يوسف صالح عيسى
Supervisor name: دريد فاضل احمد
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: Tikrit University - College Of Engineering - Department Of Chemical Engineering
Language: Arabic
University location: Salahaddin
First pages:
Abstract: تهدف هذه الدراسة الى ايجاد تاثير المعالجة الكيمياوية بطريقة الترسيب الكيمياوي على كفاءة ازالة العناصر الثقيلة في مياه الفضلات الصناعية المطروحة لتصل الى النهر بالتراكيز المسموح بها. تتم عملية الترسيب الكيمياوي بالسيطرة على الدالة الحامضية لمياه الفضلات ب | This study aims to find the effect of chemical treatment by chemical precipitation on the efficiency of removing heavy metals from wastewater to be poured back to the river. Chemical precipitation is done by controlling the (PH) of wastewater by adding a suitable hydroxide ,different hydroxides were used like the hydroxides of sodium ,calcium and potassium 0.05N each and sodium carbons 0.1N in removing heavy metals of wastewater. The study has taken prepared samples contain different concentrations of heavy metals ions like cupper 2,4 and 6 ppm zinc 5,10 and 15ppm and manganese 2,5,8 ppm Jar taste is used to show the chemical precipitation. Fast and slow mixing periods were written down to get the velocity gradient (G) and (GT) The used materials were highly efficient to remove the ions of metals. The removed amount of metals was measured by (AAS) Atomic Absorption spectroscopy. The paper has also studied the effective factors on the efficiency of precipitation like the (PH) is (8,9,10,11) and The precipitation time is (0.5,1,2,3)h.The result show that the best precipitation efficiency when an ion is used alone in the solution (PH) is (10,11) precipitation time 2h hydroxides precipitation (0.05N) it removes about 98% of cupper ions when sodium and calcium hydroxides are used ,more than 96,66% when the potassium hydroxide is used.a complete removing appears of manganese ions when the calcium hydroxide is used more than 90% when the potassium hydroxide is used.77% when the sodium hydroxide is used more than 98.4% of zinc ions removed when the sodium and calcium hydroxide is used 95.9% of zinc ions is removed when the sodium carbons are used the best treatment condition appear when the (PH) is (9 to10) and precipitation time is 2h when an ion is used alone in the solution 98% of cupper and zinc ions are removing 90% of manganese ions.When the ions are mixed in the solution the best removing efficiency appears when the (PH) is (9 to 11) and precepitition time is 2h when the hydroxides and carbons are used a complete removing of cupper ions 90% of zinc ions and more than 98.2% of manganese ions.The time of reaction to get 10.5 PH using hydroxides is (25 - 30) second when sodium carbon's are used the reaction time to get 8.5 is (50) second for cupper and zinc ,(25) second for manganese.The reaction is zero order when hydroxides are used and first order when carbons are used in treating heavy metals.

تقيم كفاءة مزيج مثبط التاكل لمحاكاة مياه التبريد باستخدام القطب الاسطواني الدوار == Evaluation of Corrosion Inhibitors Blend Efficiency For Simulated Cooling Waters Using Rotating Cylinder Electrode

Author name: عبير عبد الخالق القصب
Supervisor name: قاسم جبار سليمان
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: Al-Nahrain University - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: تم بحث كفائة مثبط التاكل لمزيج من نتريت الصوديوم / سداسي فوسفات الصوديوم على تاكل الفولاذ الكربوني في محاكاة انظمة مياه التبريد من خلال فقدان الوزن وتقنية الاستقطاب الكهروكيميائية. شملت الدراسة تاثير درجة الحرارة30، 45، 60 ?م، سرعة الدوران 200، 600، 1000 | The corrosion inhibition action of a blend of sodium nitrite/sodium hexametaphosphate (SN+SHMP) on corrosion of carbon steel in simulated cooling water systems (CWS) has been investigated by weight loss and electrochemical polarization technique. The effects of temperature 30, 45, and 60 oC, rotational velocity 200, 600, and 1000 rpm, and salts concentrations (0.005 N, 0.01 N, 0.03 N, 0.05 N) NaCl + 0.0736 N Na2SO4 on corrosion of carbon steel were studied in the absence and presence of mixed inhibiting blend (SN+SHMP). Also, the effects of inhibitors blend concentrations of 600 ppm, and 800 ppm (SN+SHMP), at temperatures of 30, and 60 oC, and rotational velocity of 200 and 1000 rpm, on corrosion rate of carbon steel were studied using Second - order Rotatable Design (Box - Wilson Design) to identify the significant effects and interaction in performing weight loss studies and corrosion potential approach. Electrochemical polarization measurements were used to study the behavior of carbon steel in different salt concentrations of (CWS) with pH of 7.5 in absence and presence of the inhibiting blend. The results showed that increasing the temperature, rotational velocity, and NaCl salts concentration leads to an increase in the corrosion rate for both uninhibited and inhibited solutions. The regression model (Box - Wilson Design) that has been developed using experimental data was used to verify that the interaction term of temperature with inhibitors blend and the square term of inhibitors blend are significant for corrosion rate in 0.05 N NaCl solution while the main variables are not pronounced. Also, it is found that the corrosion rate decreases with increases in inhibitor blend concentration up to 800 ppm in 0.05 N NaCl solution. Inhibitor blend concentration of 600 ppm is highly effective giving a high efficiency in 0.005, 0.01 and 0.03 N NaCl solutions of 98.5%, 97.7%, and 96% respectively. Electrochemical polarization studies show that increasing the inhibitors blend concentration (SN+SHMP) shifts the corrosion potential to more noble value (more positive), indicating the anodic nature of the inhibiting blend used.

تاكل الفولاذ الكاربوني تحت ظروف الخلط في وسط ثنائي الطور لمحلول ملحي مع زيت الغاز وثنائي اوكسيد الكاربون والسيطرة علية بالحماية الكاثودية == Corrosion of Carbon Steel In Stirred Two Phase Media of Brine - Gas Oil And Brine - CO2 And Prevention By Cathodic Protection

Author name: ساهر محمد عزيز
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: Al-Nahrain University
Language: English
Full text from the source: https://nahrainuniv.edu.iq/sites/default/files/Combined_321.pdf
University location: Baghdad
First pages:
Abstract: Corrosion tests of carbon steel (CS) in single and two phase media of two immiscible liquids (CaCO3 solution - gasoil mixture) and liquid - gas (CaCO3 solution - CO2 gas) under different operating conditions of temperature, agitation velocity, phase fractions, gas flow rate, and immersion time were carried out using weight loss method and electrochemical polarization technique. Flat blade disc turbine mixer was used to simulate the two phase flow conditions.The ranges of operating parameters in two immiscible phase tests were agitation velocities of (0 - 1200 rpm), temperature of (25 - 45 oC), (1 - 10 vol %) gas oil. The effect of presence of acids such as HCl and H2SO4 on corrosion rate was also investigated under different conditions.Corrosion rate (iL) measurements in CO2 saturated solution were also attained in different operating conditions of temperatures(25 - 45 oC), agitation velocity (0 - 800 rpm), salts concentrations (2.5 × 10 - 3 to 9.9 × 10 - 3M), CO2 flow rate (0.142 to1.132 m3/h ), and immersion time by determining the limiting current density.The pH values, oxygen solubility, and electrical conductivity of tested solutions were measured under all to interpret the obtained result.The results revealed that increasing agitation velocity and temperature leads to an increase of the corrosion rate in single phase brine solution. The corrosion rate in brine - gasoil mixture is irregularly varied with concentration of gasoil and agitation velocity. The limiting current density in single phase CaCO3 increases with the increase in agitation velocity, concentration of brine, and temperature. The corrosion rate in two phase brine - CO2 mixture decreases with the increase of agitation velocity flow rate of CO2, temperature, and immersion time. The corrosion potential of Carbon steel under various conditions were determined and discussed.Cathodic protection was used to protect carbon steel in brine - CO2 mixture by using zinc as sacrificial anode under different operating conditions of flow rate of CO2, agitation velocity, and temperature. Good corrosion protection efficiency was attained.

تثبيط التكلسات في انظمة التناضح العكسي باستخدام مواد كيمياوية == Scale Inhibition In Reverse Osmosis Systems Using Chemical Materials

Author name: زهراء احمد عبد الامير
Supervisor name: نجوى صابر مجيد
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: تم في ھذا البحث دراسة تثبيط تكون تكلسات كاربونات الكالسيوم على سطح غشاء نظام تناضح عكسي باستخدام نوعين من مثبطات تكون التكلسات وھما كلوريد الزنك ومادة بوليمرية بتراكيز منخفضة ودراسة تاثير تغيير معدل جريان المحلول الداخل, حامضية المحلول الداخل, تركيز ال | The present study deals with the calcium carbonate (CaCO3) inhibition on the membrane surface of the reverse osmosis (RO) desalination system by using two types of scale inhibitors which are Zinc Chloride (ZnCl2) and Polyamino Polyether Methylene Phosphonate (PAPEMP) in low concentrations and study the effect of changing the feed solution flowrate, PH of the feed solution, concentration of the inhibition material and the type of the inhibitor used on the inhibition process. In this study a range of 10 - 25 l/h of feed solution flowrate was used, the concentration of CaCl2 was 610 mg/l, the concentration of NaHCO3 was 511 mg/l, the concentration of MgSO4 was 49 mg/l, the feed pH was in the range of 6 - 10, the operating pressure kept constant at 3 bars and the temperature washeld constant at room temperature (about 40 °C) through all experiments. The concentration of the feed solution was constant, but the concentration of the inhibitors was changed using 2, 4 and 8 mg/l of Zinc Chloride then using 8 and 15 mg/l of Polyamino Polyether Methylene Phosphonate The results showed that : Permeate rate increases as the feed flowrate increases while it decreases with time.Total dissolved solids decreases as the feed flowrate increases while it increases with time.Recovery rate decreases as the feed flowrate increases and it also decreases with time.Permeate rate, recovery rate and the total dissolved solids decreases as the inlet solution pH increases.Permeate rate and recovery rate increases while the total dissolved solids decreases when Zinc chloride or Polyamino Polyether Methylene Phosphonate was used.Permeate rate and recovery rate increases when Polyamino Polyether Methylene Phosphonate inhibitor was used more than the increment of them when Zinc chloride inhibitor was used.Total dissolved solids decreases when Zinc chloride inhibitor was used more than the diminution of them when Polyamino Polyether Methylene Phosphonate inhibitor was used.

معالجة الماء من حقول النفط باستخدام محاليل ايونية في منظومة التعويم بالهواء المذاب == Treatment of Oilfield Produced Water Using Ionic Liquids In A Dissolved Air Flotation System

Author name: اوس عباس فاضل
Supervisor name: سوسن عبد مسلم محمد | سعدي كاظم عبد الحسين
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: في العراق معدل تراكيز الزيوت والشحوم (OG) في الماء المنتج يجب الا يتجاوز 09 ملغم\لتر. ولذلك فانه يتطلب معالجة المياه المنتجة بغية تلبية الحد التنظيمي للتصريف مسبقا.تم جلب نماذج الماء المنتج الخام من شركة نفط الوسط ) Md.O.C ( من الحقول النفطية من شرق بغد | In Iraq the average Oil and Grease (OG) in water concentration in discharge produced water must not exceed 10ppm. Therefore treatment of produced water is required in order to meet the pre - disposal regulatory limit.Raw produced water samples were procured from the Middle oil company (Md.O.C) (from East of Baghdad fields).Jar tests experiments were used to give a first, rough estimation for coagulants dosage of Ferric chloride and aluminum sulfate and pH values that will be used in the batch Dissolved Air Flotation (DAF) experiments. Then, the effects of the three ionic liquids (ILs) types; 1 - hexyl - 3 - methylimidazolium tetra fluoroborate (ILE), 1 - hexyl - 3 - metylimidazolium hexafluorophosphate (ILF) and 1 - octyl - 3 - methylimidazolium tetra fluoroborate (ILG) on the performance of the batch DAF unit were evaluated.It was concluded that, the beast operating conditions of the batch DAF unit were at a saturation pressure of 5 bar, recycle ratio of 50% and ambient temperature of 30 - 35 ?C. Ferric chloride with a dosage of 10 ppm was chosen as the suitable coagulant due to its low sensitivity to pH change, and its high removal efficiency for oil and turbidity in about ten minutes. ILs were used at concentration of 50 ?l per one liter of treated produced water. It was used in two positions of the DAF system; the saturation vessel and the treatment tank. The OG removal efficiency using ILG as an efficient surfactant in saturation vessel was higher than that in the treatment tank and higher than other ILs (ILG>ILF>ILE). The highest demulsification rates were obtained through saturation pressure range (2 - 5) bar. It reached about 90% removal efficiency at a pressure of 5 bar, and it was obtained 85% at saturation pressure of 3 bar which reduces the operation costs. The treated water concentration at 3bar was 9.5 ppm which meets the Iraqi pre - disposal regulatory limit.The results of testing the three ILs (ILE, ILF and ILG) in the saturation vessel and the treatment tank were used to produce contour line for the OG removal efficiency. This was conducted in order to detect the performance of the three ILs The results of optical microscope which was used to study coalescence of oil droplets in water phase, lead to consider the ILG as an effective demulsifier for Iraqi oil field produced water It was noted that the use of ILs in saturation vessel allowed micro bubble generation at operating pressures lower than 3 bar with high - energy savings.

اداء الحماية الكاثودية لخطوط الانابيب == Performance of Cathodic Protection For Pipe Lines

Author name: انس ثائر علي
Supervisor name: نصير عبود عيسى الحبوبي
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: Al-Nahrain University - College Of Engineering - Department Of Chemical Engineering
Language: English
Full text from the source: https://nahrainuniv.edu.iq/sites/default/files/ANAS%20THESIS%20.pdf
University location: Baghdad
First pages:
Abstract: ان تاكل الهياكل المعدنية المدفونة في التربة والتي على اتصال مع التربة لفترة طويلة تعتبر مشكلة هندسية واقتصادية كبيرة.في جميع انحاء العالم هنالك الكثير من انابيب النفط والغاز والماء وكابلات الاتصالات وكذلك صهاريج التخزين والمباني والاسسات والعديد من الهيا | The corrosion of metallic structures buried in soils or in contact with soils has long been a serious engineering and economic problem. All over the world millions of kilometers of gas, water, oil pipelines, communication cables, power cables as well as storage tanks, buildings foundations, and many other structures are buried in the soil, suffering from soil corrosion problems which affect mainly the external surfaces of these structures. In many countries pipelines are by far the most important means of hydrocarbon transportation. This applies to the transport of crude, finished products and natural gas.It is an international problem with more structures and materials buried in the soil. The truly international scope of interest of this subject can be seen by the amount of literature and researches in this field. Attempts have been made to overcome this problem by the use of various types of techniques. The most common and applicable technique is cathodic protection.In this research a carbon steel pipe of length 100 cm buried in a wooden box submerged by soil and impressed current cathodic protection system (ICCP).was applied using power supply and electrical closed circuit, several important factors affecting the pipe protection from corrosion has been studied, like Anode position (distance and depth), soil resistivity (wet and dry), condition the pipe (coated and un - coated), distribution of potential and currents along the pipe(cathode) and the amount of current required to achieve cathodic protection.A correlation was achieved to simulate the ranges of parameters and factors affecting Impressed Current Cathodic Protection. Regression of this model to data and results yielded parameter values vary depending on the effect of the same factor.

ازالة الكبريت بالامتزاز من النفثا الثقيلة العراقية بواسطة 13X زيولايت == Adsorption Desulfurization of Iraqi Heavy Naphtha Using 13X Zeolite

Author name: موفق محمد يحيى
Supervisor name: حسين قاسم حسين
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: اجري هذا العمل لدراسة تاثير الامتزاز الانتقائي في ازالة مركبات الكبريت من النفثا الثقيلة العراقية التي تم توريدها من مصفاة الدورة. انجزت عملية الامتزاز بواسطة 13 منخل جزيئي داخل العمود ذو الحشوة الثابتة. X 6?? - من ??5 LHSV وقد نفذ الامتزاز الانتقائي في | This work was conducted to study the effect of selective adsorption on removal of sulfur compounds from Iraqi heavy naphtha which was supplied from Al - Dura refinery. The adsorption was carried out by molecular sieve 13X in a fixed - bed column.The selective adsorption was run out at different operating conditions such as LHSV from 1.5 - 6.0 h P - 1 P , molecular sieve bed weight from 15 - 30 g , sulfur inlet concentration of feedstock from 600 - 1650 ppm, and adsorption temperature at 25 PoPC and 40 PoPC.The breakthrough time, breakpoint and saturation state ( bed replace point ) were determined for different operating conditions in addition to the ratio of accumulated effluent weight per bed weight. Also , regeneration possibility of 13X spent catalyst was studied by using oxidative technique at different temperatures and air flow rates.The results show that increasing in LHSV and inlet concentration makes the breakthrough curves more steeper , also the breakthrough time and breakpoint decreases. Increasing the bed weight will increase both the breakthrough time and breakpoint.The best operating conditions for removing sulfur compounds were LHSV 3.0 h - 1 , bed weight of molecular sieve about 20 g and 25oC temperature , where the sulfur content in a heavy naphtha was reduced from nearly 600 ppm to less than 1 ppm (by weight).Regeneration step was thermally took place by hot air flow in a range of 16.66 - 25 liter / min and temperature range from 200 - 350 oC , the best desorption conditions for (85.8%) weight percent removal were at 16.66 liter / min air flow and 350 oC.

دراسة الحركية ونمذجة تفاعل استرة حامض الاوليك باستخدام NaY زيولايت المحضر == Kinetic Study And Modeling of Olic Acid Esterification Over Prepared Nay Zeolite

Author name: رويدة نزيه عباس
Supervisor name: عمار صالح عباس
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: تم تحضير زيولايت من نوع استرة حامض الاوليك. اجريت فحوصات الاشعة السينية ونسبة الصوديوم ونسبة السيليكا الى الالومينا والمساحة السطحية والحجم المسامي للعامل المساعد المحضر.اظهرت الفحوصات التوافق بين العامل المساعد المحضر مع التركيب العام للزيولايت القياسي. | The NaY zeolite catalyst was prepared from locally available Iraqi kaolin in order to use it in the esterification reaction of oleic acid. X - ray diffraction, scanning electronic microscopy, sodium content, silica to alumina ratio, surface area and pore volume were determined for the prepared NaY zeolite. The results of x - ray diffraction and scanning electron microscopy show that the prepared NaY zeolite has approximately the same crystal structure as the standard. The sodium content was 12.26 wt. %, and the silica to alumina mole ratiowas 2.6, surface area 330 m2/g and pore volume 0.35 cm3/g. Because of the oleic acid is one of the free fatty acids that can found in vegetable oils and animal fats. Oleic acid used as a suggested feedstock to study and simulate production of biodiesel via esterification reaction.Esterification reaction was analyzed at different operational conditions including the ethanol/oleic acid molar ratio of 3/1 and 6/1, different temperature from 40 to 70 °C, reaction time up to 180 minutes and catalyst (2, 5 and 10 wt. % NaY zeolite). The maximum conversion of oleic acid (about 0.83) was observed at 6/1 ethanol/oleic molar ratio, 70 °C reaction temperature, 10 wt. % NaY zeolite as a catalyst, and 60 minutes contact time. The study of the kinetics of the esterification reaction of oleic acid, indicated that the value of the activation energies of esterification ware 42692 and 17218 J/mol for forward and backward reaction respectively, and frequency factors were 7.2*104 (mol - 1/minute) for forward reaction and 4.5 (mol - 1.25/minute) for backward reaction. The values of reactants and products orders were 1, 1, 1.2 and 1 for oleic, ethanol, ester and water respectively.The statistical analysis of the esterification reaction and experimental data indicates that the average relative error was 1.53, within 0.95 confidence level.ReactOp cascade package simulator used for simulation the behavior of batch and plug flow reactors in different operating modes (adiabatic and isothermal) carried out at selected operating conditions Contents Contents.

عمليات التنافذ الامامي - العكسي لمعالجة المياه الملوثة بالزيوت == Forward - Reverse Osmosis Processes For Oily Wastewater Treatment

Author name: نور حمود زغير
Supervisor name: حسن فرهود مكي
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: في هذه الدراسة, تم بحث مدى ملائمة عمليات التنافذ (الامامي - العكسي) لمعالجة المياه الملوثة بالزيوت. حيث طبقت عملية التنافذ الامامي لاسترجاع الماء النقي من المياه الملوثة بالزيوت. تم استخدام زيت محرك الديزل والكازولين نوع (15W - 40) لتحضير محلول اللقيم, بي | In this study, the feasibility of Forward - Reverse membrane osmosis system was investigated for treating the oily wastewater. Forward osmosis (FO) process was applied to recover pure water from oily wastewater. Gasoline and diesel engine oil (15W - 40) was used to prepare the feed solution (FS). While sodium chloride (NaCl) and magnesium chloride (MgCl2) salts were used as draw solutions, and the membrane that was used in FO process was cellulose triacetate (CTA) membrane. While reverse osmosis process was used to recovery water from the diluted draw solution using polyamide (thin film composite (TFC)) membrane. In the first stage was applying the FO process for treating the oily wastewater with two parts. The first part included the FO process using the batch system whereas the second part included the FO process using the flowing system for different draw solutions. Theoperating parameters studied were : draw solution type, draw solution concentrations (0.25 - 0.75 M), oil concentration in FS (100 - 1000 ppm), the temperatures of FS and DS (30 - 45 °C), pH of FS (4 - 10) and for the forward osmosis flowing process the flow rate of both DS and FS (20 - 60 l/h), while the pressure was maintained at 0.5 bar. The run - time of the FO process was for five hours. It was found that water flux through membrane decreases with increasing time, while oil concentration in the FS increases with increasing time. Also, it was found that the water flux produced from the osmosis cell and oil concentration in FS increase by increasing the concentration of draw solutions, the flow rate of FS and the temperature for a limit (40oC), then, the water flux and oil concentration decrease with increasing the temperature because of happening the internal concentration polarization phenomenon. By increasing the oil concentration in FS and the flow rate of the DS, the water flux and oil concentration in FS were decreased. While it had a fluctuated behavior with increasing the pH of oily wastewater. It was found also that MgCl2 gives water flux higher than NaCl. It was observed that the best operating conditions in this study were : concentration of salt (0.75 M) for MgCl2, oil concentration (100 ppm), pH of FS (7.3), temperature of feed and draw solution (40oC), flow rate of FS (60 l/h), and flow rate of DS (20 l/h). The values of resistance to solute diffusion within the membrane porous support layer were 55.93 h/m and 26.21 h/m for NaCl and MgCl2 respectively. The second stage was applied reverse osmosis process for separating the fresh water from a diluted (NaCl) solution using different parameters such as draw solution concentration (0.08 - 0.16 M), feed flow rate (20 - 40 l/h) within two hours of work of the reverse osmosis system.

تاثير المحتوى المائي , درجة الحرارة وكلوريد الصوديوم على تاكل CO2 للصلب الكربوني (A106 B) في النفط العراقي == Effect of Water Content , Temperature And NaCl On CO2 Corrosion of C - Steel (A 106 B) In Iraqi Crude Oil

Author name: انعام يوسف عبد الرحمن
Supervisor name: سعد احمد جعفر
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: Tikrit University - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Salahaddin
First pages:
Abstract: ان التاكل الداخلي في انابيب الصلب الكربوني الذي يحدث بوجود غاز ثاني اوكسيد الكربون يعتبر مشكلة جوهرية في صناعات النفط والغاز وهو يقترن دائما مع وجود الماء. ان احتمالية حدوث التاكل تزداد بصورة عامة مع تزايد نسبة الماء ومع زيادة مستوى الماء المنتج تزداد مع | Internal corrosion of carbon steel pipelines occurring in the presence of CO2 is a substantial problem in the oil and gas industries. It is always associated with the presence of free water. The likelihood of corrosion generally increases with the volume fraction of the water phase. As the produced water level increases, the corrosion rates of carbon steel increase very rapidly and causes damage of petroleum and gas pipelines. The present research work focuses on the investigating of the corrosion rate of carbon steel as flow line in crude oil production with CO2 content employing three Iraqi crude oil (Kirkuk crude oil, Halfaya crude oil, Rumalia crude oil) with different brine concentrations [1%NaCl, 2%NaCl, 3%NaCl]. Determining the corrosivity of Iraqi crude oil was studied for the first time. Experiments were performed in an autoclave test apparatus, crude oil - produced water mixtures, water cuts were (0, 10, 20, 30, 40, and 100%), and total volume of mixtures inside the autoclave was always kept at 100ml and temperature (20, 40, 60°C). For all experiments, CO2 partial pressure was maintained at (4 bar) and rotational speed (500 rpm).The corrosion rates were determined by the weight loss technique. The results revealed that the corrosion rates of carbon steel increased by increasing water cut and temperature, but decreases with increasing salt concentration for all types of crude oil. Results also indicated that different crude oil has significantly different effects on corrosion of carbon steel, with identical brine compositions. Therefore, Rumaila crude oil exhibits the highest corrosion rates and Kirkuk crude oil exhibits the lowest corrosion rates while Halfaya crude oil exhibits a moderate corrosion rates e.g. at 1% NaCl, 20% water cut, temperature 60°C, pressure 4bar, the corrosion rate of carbon steel in Rumaila crude oil is 0.9163mm/yr whereas it is 0.564 mm/yr and 0.705 mm/yr in Kirkuk crude oil and Halfaya crude oil respectively. The Corrosion Rate Break produced water level was determined from the experiments. These tests are employed to evaluate the requirements for corrosion inhibitor treatment. At 100% water cut (brine/CO2) the corrosion rates of carbon steel was the highest. The presence of crude oil decreases the corrosion rates e.g. at 1% NaCl,100% water cut(brine/CO2) the corrosion rate is 7.1197 mm/yr, whereas at 40% water cut/ Rumaila crude oil the corrosion rate is 1.4097 mm/yr.

دراسة استخدام الكاربون المنشط الحبيبي لازالة الفينول والباراكلوروفينول والبنزين من المياه المطروحة من مصفى بيجي == Study of Using Granular Activated Carbon For Removing Phenol , Parachlorophenol , And Benzene From Wastewater of Baiji Refinery

Author name: ابتسام احمد جدوع القيسي
Supervisor name: مزهر مهدي ابراهيم الدوري
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: Tikrit University - College Of Engineering - Department Of Chemical Engineering
Language: Arabic
University location: Salahaddin
First pages:
Abstract: ان هدف الدراسة الحالية هو ازالة البنزين والفينول والباراكلوروفينول من مياه الصرف الصناعية في مصفى بيجي بعملية الامتزاز بواسطة الكاربون المنشط الحبيبي وامكانية تمثيل العملية بنموذج رياضي.وقد صمم وصنع جهاز مختبري لغرض انجاز الدراسة اخذين بالاعتبار امكاني | The aim of the present study is to remove phenol, parachlorophenol and Benzene from waste water of Baiji refinery by using granular activated carbon. Moreover using the present models to represents the experimental data.A Laboratory scale apparatus is designed and constructed taking into account the most important parameters effecting adsorption. In performing the present study Actual wastewater of Baiji refinery is taken to perform the experimental work.The results indicated that phenol, parachlorophenol and Benzene can be removed completely using granular activated carbon. Also the results indicated that breakthrough and exhaustion time are inversely proportional with the concentration of pollutants and liquid hourly space velocity, while they are directly proportional with the thickness of granular activated carbon. Its found that the Adsorption capacity is directly proportional with the concentration of pollutants and liquid hourly space velocity. The results of this work indicated also the thickness of adsorption zone, which is calculated depending on the result of this study, is directly proportional with liquid hourly space velocity.Application of the most famous available models that are used to represent adsorption phenomena on our experimental data show that only Freundlich model gives excellent agreement.In order to find mathematical model for breakthrough and exhaustion time as a function the most important parameters, an advanced computer program is used.We found two mathematical model for breakthrough and exhaustion time as a function of granular activated carbon thickness, liquid hourly space velocity and the concentration of pollutants. These two models give acceptable agreement with the experimental results.The adsorption capacity for the three pollutants are calculated and found to be directly proportional with liquid hourly space velocity and pollutants concentration.

استخدام بعض المخثرات الطبيعية لازالة المواد العالقة من المياه == Using of Some Natural Coagulants To Remove Collide Particles From Water

Author name: زينة علي حميد
Supervisor name: رافع جمال يعقوب
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: Tikrit University - College Of Engineering - Department Of Chemical Engineering
Language: Arabic
University location: Salahaddin
First pages:
Abstract: تعتبر عمليات التخثير والتلبيد والترسيب من اكثر العمليات شيوعا في معاملة المياه لغرض الحصول على مياه صالحة للشرب. ولتحقيق هذا الغرض نستخدم عدة مواد كيمياوية في مرحلة التخثير. يعتبر الشب من اكثر المواد شيوعا كمادة مخثرة. بينت العديد من الدراسات والبحوث ا | Coagulation, flocculation, and settling processes are the most important processes for water purification chemical materials have to be used for coagulation processes Alum is one of the most prevalent as a coagulation material many researches and studies explain that the Alum has a side effect causes a health problems and discuses for consumer, so it is necessary to search for alternatives. In our study we explain the usage of some alternatives of Alum, we choose the Starch, Dextrin, Okra seeds & Cactus oil as a natural coagulants, we test them within the range of initial turbidity from (30 - 500 NTU) and range of pH (from 5 to 10) and we found the best dose for each coagulant.We design and fabricate a laboratory Jar test device and use the Lamella settler for test these natural coagulants.We are made many experiments by using the Jar test and Lamella settler and when compared results found that the Lamella settler has a good settling efficiency.Results show that the efficiency of the Jar test (50 - 60%) and for Lamella settler (40 - 50%).

انتقال الحرارة في الغليان الحوضي باستخدام موائع النانو == Pool Boiling Heat Transfer Using Nanofluids

Author name: خيرية مطر عيسى الخزاعي
Supervisor name: جمال مانع علي الربيعي
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Technology - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: يمكن اعتبار نظام المغلي التنوي واحدة من اكثر الطرق فعالية لزيادة التبادل الحراري في منطقة صغيرة نسبيا. انتقال الحرارة في الغليان الحوضي لموائع النانو تم التحقق عنها تجريبيا باستخدام مياه الالومينا AL2O3 ومياه ثاني اوكسيد التيتانيوم TiO2.كموائع نانويه (n | Nucleate boiling regime can be considered one of most effective ways to increase the heat exchange in a relatively small area. Pool boiling heat transfer nanofluid was investigated experimentally using Al2O3 - water and TiO2 - water nanofluids. The experimental test rig consists of boiling vessel and electrically heated plate heating element of stainless steel as heating element. Different concentrations of nanofluids were tested (0.05w %, 0.1w %, 0.3 w%, and 0.5 w %). The nanofluids for Al2O3 and TiO2 were prepared by mixing the( Al2O3 and TiO2) nanoparticles with distilled water in magnetic stirrer for three time periods at (2, 3 and 4) hours and for 1 hour in an ultrasonic bath to suspend the nanoparticles in base fluid. The nanofluids were scanned by scanning electron microscope to ensure well dispersion of nanoparticles in distilled water. Experiments were carried out firstly using pure water then nanofluid to compare the heat transfer enhancement. Results give maximum enhancement ratio in heat transfer rate of (100%) for 0.5% weight concentration for Al2O3 - water nanofluid and (81.82%) for TiO2 - water nanofluid at the same concentration. In both nanofluids the enhancement ratio increases with increased nanoparticle concentrations.This lead to increase in pool boiling heat transfer coefficient.

ازالة الكبريت من زيت الوقود باستخدام الاكسدة المعززة بالموجات الفوق الصوتية == Ultrasound - Assisted Oxidative Desulfurization of Fuel Oil

Author name: جعفر مازن جعفر
Supervisor name: نيران خليل ابراهيم | ولاء عبد الهادي نوري
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Technology - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: Due to the dramatic environmental impact of sulfur emissions associated with the exhaust of engines, sulfur content specification for diesel fuels became more and more stringent worldwide. Last environmental regulations for ultralow sulfur diesel require very deep desulfurization processing, which cannot be met by the conventional hydrodesulfurization process (HDS).The present work focuses on benefiting from integrating an ultrasoundassisted oxidative desulfurization process (UAODS) with the conventional HDS process to produce ultra - low sulfur fuels. The proposed method involves a batch ultrasound - assisted oxidative desulfurization process to desulfurize a previously hydrotreated diesel containing 480 ppm sulfur. The oxidizing system used was H2O2/CH3COOH with FeSO4 being used as a catalyst. An ultrasonic probe system was used to enhance the conversion of sulfur - bearing compounds that exist in diesel to sulfones and sulfoxides to affect their removal by a certain separation method, such as extraction or adsorption.The major influential parameters related to UAODS process have been investigated, namely : ratio of oxidant/fuel, ratio of the promoter/oxidant, dose of catalyst, reaction temperature, intensity of ultrasonic waves. A set of comparative studies were also carried out including type of extraction solvent, effect of initial sulfur content, and type of sulfur separation method. Total evaluation for the treated diesel was performed, including GC - MS analysis which has been used to monitor the change of organic sulfur compounds andhydrocarbons in diesel during the desulfurization process.The oxidation treatment, in combination with ultrasonic irradiation, revealed a synergistic effect for diesel desulfurization. The experimental results showed that the removal efficiency for sulfur compounds could amount to 98%, and sulfur level can be reduced to 12 ppm at mild operating conditions (70 and 1 bar). This indicates that this process is so efficient and promising for the production of ultra - low sulfur diesel fuels.The kinetics of the reaction has been also studied. It was observed that the UAODS of diesel fuels fitted pseudo - first - order kinetics under the studied experimental conditions. During this process, values of the apparent rate constant and activation energy were 0.373 min - 1 and 24 kJ/mol, respectively.

ازالة المحتوى الكبريتي من وقود الديزل بواسطة الاكسدة والاستخلاص بالمذيب == Desulfurization of Diesel Fuel By Oxidation And Solvent Extraction

Author name: شيم بهجت عبد الكريم
Supervisor name: ودود طاهر محمد | رغد فريد
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: يهدف البحث الى ازالة المحتوى الكبريتي من مقطع الديزل المهدرج للتخلص من المركبات الكبريتية الثايوفينية التي تتعذر ازالتها بواسطة عملية الهدرجة المعتمدة في المصافي النفطية. ودراسة افضل الظروف للحصول على اعلى نسبة ازالة.رست الظروف التشغيلية التالية : سرعة ال | Removal of sulfur species from fuels is an increasingly critical environmental issue. Hydrodesulfurization (HDS) removes sulfur compounds, such as mercaptans and sulfides from hydrocarbons; however, some sulfur - containing compounds (such as diebenzothiophene) are very difficult to remove and need deep desulfurization processes.This work was applied to the desulfurized diesel fuel produced from the conventional HDS process for ultra - desulfurization. The used fuel types in this investigation were either real diesel fuel or simulated diesel fuel, where sulfur - containing compound ( dibenzothiophene DBT) converted to its corresponding sulfone by oxidation using hydrogen peroxide as an oxidant and acetic acid as homogenous catalyst, and solvent extraction by using acetonitrile (ACN) or N - methyl - 2 - pyrrolidone (NMP) as extractants.Simulated diesel fuel according to British Petroleum 200B doped with dibenzothiophene (DBT) was prepared, the effect of stirring speed (150, 250, 350 and 450) rpm, temperature (30, 40, 45 and 50) ?C, oxidant/simulated diesel fuel ratio (0.5, 0.75,1 and 1.5) (v/v), catalyst/oxidant ratio (0.125, 0.25, 0.5 and 0.75) (v/v), solvent type, and solvent/simulated diesel fuel ratio (0.5, 0.6, 0.75 and 1) (v/v) were examined in order to obtain the maximum sulfur removal. The results of this work exhibit that the highest removal of sulfur 98.5% for N - methyl - 2 - pyrrolidone and 95.8% for acetonitrile were obtained under the conditions of operating in table below : Stirring Speed (rpm) 350 Temperature (?C) 50 Oxidant (hydrogen peroxide)/simulated diesel fuel ratio 1 Catalyst (acetic acid)/oxidant ratio 0.5 Solvent (ACN or NMP)/simulated diesel fuel ratio 1 Experiments with the above best conditions were carried out on Real diesel fuel obtained from Al - Dora refinery with 1000 ppm sulfur containing compounds. It was found that sulfur removal from real diesel fuel was 62.5% for acetonitrile and 75% for N - methyl - 2 - pyrrolidone.

استخلاص الزيوت العطرية من قشور الحمضيات باستعمال التقطير البخاري بمساعدة المايكرويف == Extraction of Essential Oils From Citrus By - Products Using Microwave Steam Distillation

Author name: سارة جبير صالح
Supervisor name: ابتهال كريم شاكر
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: يهدف هذا البحث الى استخلاص الزيت العطري من ثلاثة انواع من قشور الحمضيات (البرتقال, الليمون, اللالنكي) بطريقتين : التقطير البخاري والتقطير البخاري بمساعدة المايكرويف.ودراسة تاثير عوامل الاستخلاص : (وزن القشور, وقت الاستخلاص,طاقة المايكرويف ونوع قشور الحمضي | The main objectives of this research is to extract essential oil from : orange( citrus sinensis), lemon( citrus limon) and mandarin( citrus reticulata) peels by two methods : steam distillation (SD) and microwave assisted steam distillation (MASD), study the effect of extraction conditions : weight of the sample( 398.56g, 281.8g, 116.76g), extraction time, microwave power( 135W, 265W, 445W) and citrus peel type( orange, lemon, mandarin) on oil yield and compare the results of the two methods, the resulting essential oil was analyzed by Gas Chromatography (GC).Essential oils are highly concentrated substances used for their flavor and therapeutic or odoriferous properties, in a wide selection of products such as foods, medicines and cosmetics. Extraction of essential oil is one of the most time and effort consuming process. Microwave - assisted extraction is a green technique for the extraction of natural products. (MASD) was better than (SD) in terms of rapidity, energy saving and yield. (MASD) gave higher yield than (SD) with shorter extraction time, yield of orange oil extracted by (MASD) was (1.150%) in (35min.) compared to (1.095%) in (45min.) by (SD) process, same results obtained for lemon and mandarin. It was found that the optimal microwave power was (135W) and the yield was : (1.150%, 1.115%, 0.940%) for orange, lemon and mandarin respectively, (MASD) increased extraction temperature in short time and to a higher level compared to (SD).It was found that the optimal weight was (398.56g) and the yield in (SD) was : (1.095%) and MASD (1.091%) for orange oil, same results obtained for lemon and mandarin.The best citrus peel type which gave the highest yield was orange followed by lemon then mandarin in both processes.Limonene is the most abundant component in citrus essential oil, (GC) analysis showed that the amount of limonene increased in low microwave power with long extraction time for mandarin oil it was (84.3891% at 135W in 60min.), while for (SD) it was (83.0271% in 75min.) and decreased with increasing microwave power for orange oil it was (80.9661% at 265W in 35min.) while for (SD) it was (83.2189% in 45min.), (SD) was more convenient to give high amount of limonene because of the graduate temperature rise, while in microwave extraction exposure to low microwave power for long time would give complete recovery and better quality of essential oil.

تاثير الحماية من التاكل بواسطة الليزر على سبائك الالمنيوم == The Effect of Laser Surface Melting Corrosion Protection On Al Alloys

Author name: هبة خميس اسماعيل
Supervisor name: شذى احمد سامح
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Technology - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: يهدف هذا البحث الى دراسة تاثير المعاملة بالليزر على تاكل سبائك الالومنيوم (7075, 6061, 5083) المغمورة في محلول ملحي (كلوريد الصوديوم) بمختلف التراكيز. وقد تم اعداد عينات من سبائك الالومنيوم ذات ابعاد (2 ملم) سمك وقطر (25 ملم)، وكانت تجارب الاستقطاب في مح | The objectives of the present project are to generate uniform melted layers, free of large second phases to assess the corrosion resistance of the laser treated surface in comparison with the untreated alloy. So disc samples of (7075, 6061 and 5083) aluminum alloys of 2 mm thickness and 25 mm diameter, have been prepared. Polarization tests were carried out in (M lab potentiostat / galvanostat) (Germany) at 298K temperature and (1.5, 2.5 and 3.5) % wt of NaCl solution. The experiments were carried out before and after laser surface melting by (Nd : YAG, MED - 810) pulse laser, system (Q - Switched Nd : YAG 1064/532nm). Before laser surface melting the results showed that the value of the corrosion current density obviously increases with increasing the concentration of NaCl from 1.5% to 3.5%. As well as higher Cl - ions concentration more negative pitting potential (Epit) of aluminum alloys and decrease in the electrochemical stability of aluminum. The corrosion rate for the specimen 7075 is larger than that of 6061 and 5083 aluminum alloys under the same conditions. So it means that the specimens 6061 and 5083 have high resistance to corrosion in NaCl solution After laser surface melting the results showed that the surface of aluminum alloys became more homogenous and pure after treatment.It was found that the corrosion current density decreases after Laser Surface melting at about three orders than that of untreated samples, therefore, the value of the corrosion rate of laser - treated alloy is smaller than that of the untreated. As well as the pitting corrosion potential after Laser Surface melting obviously shifted to more positive direction for all aluminum alloys in different concentrations of the NaCl solution.

تحضير الكاربون المنشط من نوى التمر باستخدام كاربونات البوتاسيوم كعامل منشط في ازالة صبغة المثيلين الزرقاء == Preparation of Activated Carbon From Date Stones By K2Co3 Activation For Methylene Blue Dye Adsorption

Author name: اسماء فاضل عباس
Supervisor name: مثنى جبار احمد
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
Abstract: Present study deals with the preparation of activated carbon (AC) from date stones by K2CO3 activation via microwave heating and the removal of methylene blue (MB) dye from aqueous solution by using such carbon as adsorbent. The influence of radiation time (4 - 12min), radiation power (540 - 700W) and impregnation ratio (0.5 - 2.5g/g) on the yield and MB uptake of such carbons were studied. Central composite design was used to determine the optimum preparation conditions and two quadratic models were developed to correlate the preparation variables for both responses.The optimum preparation conditions were reported as 8 min radiation time, 660 W radiation power and 1.5 g/g impregnation ratio resulting in 19.99% yield and 460.123 mg/g MB uptake. From the analysis of variance (ANOVA), it was found that the radiation time had the greatest effect on the yield while impregnation ratio had the greatest effect on MB uptake.The characteristics of AC were examined by pore structure analysis, scanning electron microscopy (SEM) and Fourier transforms infrared spectroscopy (FTIR). The BET surface area and total pore volume were indentified to be 1144.25 m²/g and 0.656 m³/g, respectively. Batch adsorption study was adopted to determine the experimental adsorption isotherm data of different initial concentration of MB (50 - 450 mg/l). The equilibrium data were analyzed using Langmuir, Freundlich and Sips isotherm models. The results showed that the experimental data were well fitted with sips isotherm with maximum monolayer adsorption capacity of 484.7 mg/g. Pseudo - First order, Pseudo - Second order, and intraparticle diffusion models were used to analyze experimental kinetics data with high correlation coefficient for Pseudo - second - order model.

التكسير الحراري والحفازي لمخلفات البولي اثيلين البلاستيكية في مفاعل شبه دفعوي == Thermal And Catalytic Pyrolysis Of Polyethylene Plastic Waste In Semi Batch Reactor

Author name: فهمي ابو القاسم محمد
Supervisor name: عمار صالح عباس
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:

تاثير تصميم موزع الغاز على هيدروديناميكيات ومعامل انتقال الماده في العمود الفقاعي الثلاثي الاطوار == Effect Of Distributor Design On Hydrodynamics And Mass Transfer Coefficient Of Slurry Bubble Column

Author name: هبة علاء عبد الكريم
Supervisor name: صبا عدنان غني | رافع جمال يعقوب
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: Tikrit University - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Salahaddin
First pages:

دراسة في فصل الاوكسجين من الهواء بطريقة الامتزاز بتغير الضغط (PSA) == A Study Of Oxygen Separation From Air By Pressure Swing Adsorption (PSA)

Author name: هبة سعدي ايوب
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: Tikrit University - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Salahaddin
First pages:

اختزال مركبات الكبريت من المقاطع النفطية باستخدام تقنية الاكسدة والامتزاز == Reduction Of Sulfur Compounds From Petroleum Fractions Using Oxidation Adsorption Technique

Author name: بان جابر ابراهيم
Supervisor name: NADA SADOON AHMEDZEKI
General topic: Chemical Engineering
Specific topic: Chemical Engineering
Degree: Master
University: University of Baghdad - College Of Engineering - Department Of Chemical Engineering
Language: English
University location: Baghdad
First pages:
1 ... 13 14 15 16 17 ... 31