عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 50

تصنيع التراكيب النانوية Co3O4 / ZnO / Si للتطبيقات الكهروبصرية Fabrication of Co3O4/ZnO/Si Nanostructures for Optoelectronic Applications

اسم المؤلف: ابتهاج هادي حمود
اسم المشرف: ازهار عناد حسن
الموضوع العام: علوم الليزر
السنة: 2023
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تصميم العدسة الثنائية اللونية الملتصقة باقل الزيوغ اللوني ,الكروي والمذنب Design of Chromatic Cemented Doublet Lens with Minimum Chromatic, Spherical and Coma Aberrations

اسم المؤلف: ميديا اسماعيل سليمان الكاكـي
اسم المشرف: ضياء نوري رؤوف
الموضوع العام: علوم الليزر
السنة: 2005
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تحضير ودراسة مركبات جديدة لتطبيقات الخلايا الشمسية Preparation and study new composite for solar cell applications

اسم المؤلف: ماجد كاظم عبد الحمزة بنيان
اسم المشرف: غالب عبد الوهاب الدهش سيف محمد حسن الشريفي
الموضوع العام: علوم الليزر
السنة: 2018
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بابل
الصفحات الاولى:

تضمين الاتصالات لليزر شبه الموصل النقطي الكمي بوجود التغذية العكسية البصرية Modulation Of Communication By Quantum Dot Semiconductor Laser(QDSL) With Optical Feedback

اسم المؤلف: نور ضياء محود تقي علي
اسم المشرف: باسم عبد اللطيف غالب رياض ناجي علي
الموضوع العام: علوم الليزر
السنة: 2019
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بابل
الصفحات الاولى:

الكشف عن الرطوبة النسبية باستخدام مقياس التداخل لليف البلوري الفوتوني Relative Humidity Detection Using Photonic Crystal Fiber Interferometer

اسم المؤلف: سعاد صاحب هندال
اسم المشرف: حنان جعفر طاهر
الموضوع العام: علوم الليزر
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

الخواص اللاخطية للموائع النانوية باستخدام تقنية حيود الليزر Nanofluids Nonlinear Properties Using laser Diffraction Technique

اسم المؤلف: مناف قاسم خلف
اسم المشرف: مازن مانوئيل الياس
الموضوع العام: علوم الليزر
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

الكشف عن البخار الكيميائي بحساسية عالية المستند على مقياس التداخل لليف البلوري الفوتوني Chemical vapor detection with high sensitivity based on Photonic crystal fiber interferometer

اسم المؤلف: رواء كاظم زرزور
اسم المشرف: حنان جعفر طاهر
الموضوع العام: علوم الليزر
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: استخدمت مقاييس تداخلات الالياف البلورية الفوتونية في العديد من تطبيقات التحسس. في هذا البحث, تم استخدام الالياف البلورية الفوتونية ذو القلب الصلب المستندة على مقياس تداخل ماخزندر, الذي يسلك حساسية عالية لمعامل الانكسار ومختلف المركبات العضوية المتطايرة، من دون الحاجة الى اي مواد قابلة للاختراق. مقياس التداخل المدمجة ,القوية ويتكون من نهاية ليف بصري بلوري ,الليف البصري البلوري مرتبط مع الليف التقليدية ذات النمط المنفرد ((SMF - 28هذا الارتباط يكون باقل خسارة dB(0.19) في منطقة الارتباط فتحات فراغات الليف تنهار كليا, وتسمح بلتهيج واعادة التركيب للانماط القلب والغلاف .وفي منطقة الارتباط الانماط الاساسية لليف البصري التقليدي تبدا بالحيود عندما تدخل الجزء المنهار من منطقة الارتباط لليف البلوري الفوتوني . بسبب الحيود ، يوسع النمط ويسمح لاثارة نمطين رئيسيين في نهاية اليف البصري الفوتوني.الجهاز يعكس الطيف ويظهر نمط تداخل كدالة جيبية التي تظهر ازاحة بالطيف البصري بشكل مختلف عندما تتسل جزيئات المركبات العظوية المتطايرة الى فتحات الليف البصري البلوري. استخدم ليزر دايود كمصدر ضوئي وبطول موجي 1550 nm ، حيث تم استخدام محلل الطيف الضوئي (OSA) الحساس للغاية في رصد وتسجيل الطيف المنعكس. استخدم ثلاثة انواع من السوائل الكيميائية (N - الهكسين، الميثانول وبروبانول)، كل هذه السوائل الكيميائية وابخرتها لها شفافية عالية في منطقة الطيف المرئي والمنطقة تحت الحمراء القريبة. في هذه التجربة، وجدنا افضل زمن الاستجابة لهذا المتحسس هو من (30 - 35) ثانية لكميات قليلة جدا من هذه السوائل، كما تم دراسة تاثير طول المتحسس على قيمة الازاحة للطول الموجي ، تم اختبار خمسة اطوال مختلفة من PCF ذو القلب الصلب70,50,40,30and 20) nm). حدود الكشف في هذا الجهاز تم من خلالها تسجيل ازاحة في الطول الموجي لنسب من ابخرة مواد كيمياوية تصل لغاية (4.4) nm للبخار الهكسان عندما يكون طول رئس المتحسس (20)mm . في هذا العمل, الحد الاقصى للحساسية التي تم الحصول عليها للمركبات العضوية المتطايرة هي mol \15420 nm في بخار الهكسان .وقد تحققت بعض نتائج المحاكاة باستخدم برنامج COMSOL multiphysics ,تم استخدم هذا البرنامج لتصميم الليف البصري البلوري وايجاد توجيه دايود ليزر 1550 nm داخل الليف البصري البلوري عندما يتغير معامل الانكسار نتيجة لدخول ابخرة المركبات العضوية المتطايرة(هكسان, بروبان, وميثان) وملئها لفتحات الليف. نتائج mulyiphsics COMSOL عندما تسلل ابخرة السوائل الى فراغات الليف البلوري الفوتوني بدلا من الهواء. وعندما يتسلل بخار السائل الى PCF ذو النواة الصلبة (LMA - 10) الذي يؤدي الى تغيير في معامل الانكسار الفعال للPCF، والتي بدورها تؤثر على انتقال ليزر داخل PCF بسبب قيمة معاملات الانكسار للمركبات العضوية المتطايرة. ويظهر نتيجة لذلك ان طاقة طيف انتقال الليزر تخفضت بعد تسلل البخار مع التغير في الطول الموجي المركزي لليزر الدايود. | Photonic crystal fiber interferometers are used in many sensing applications. In this work, an in - reflection photonic crystal fiber (PCF) based on Mach - Zehnder (micro - holes collapsing) (MZ) interferometer, which exhibits high sensitivity to different volatile organic compounds (VOCs), without the needing of any permeable material. The interferometer is robust, compact, and consists of a stub photonic crystal fiber of large - mode area, photonic crystal fiber spliced to standard single mode fiber (SMF) (corning - 28), this splicing occurs with optimized splice loss 0.19 dB. In the splice regions the voids of the holey fiber are completely collapsed, which allows the excitation and recombination of core and cladding modes. The device reflection spectrum exhibits a sinusoidal interference pattern which shifts differently when the voids of the PCF are infiltrated with VOC molecules. Laser diode with wavelength 1550nm has been used as a pump light source, where a highly sensitive optical spectrum analyzer (OSA) was used to monitor and record the reflected spectra. Three types of chemical liquids used (N - Hexane, Methanol and Propanol), all of these chemical liquids and their vapor have a high transparency for visible and NIR spectrum. In this experiment, we found the best response time to this sensor is from (30 - 35) sec for very few quantities from these liquids which approximately measured in microliter, also it was studied the effect of the length of the head sensor on the volume of shift of the wave length, five different lengths of solid core PCF (LMA - 10) (70,50,40,30, and 20) mm were tested.The detection limits of our device associated with the maximum shifts of the wave length is 4.4nm for N - Hexane vapour when the length of the head sensor 20mm.In this work, the maximum sensitivity obtained of volatile organic compounds is 15420nm/mol at the vapor of N - Hexane.Some simulation results have been achieved by using the COMSOL mulyiphsics program. It used to design the photonic crystal fiber large - mode area and find the guiding of laser 1550 nm at this fiber when change the refractive index cladding of the photonic crystal fibers by filling the hole of cladding in vapor of (N - Hexane, propanol, methanol) at 1550 nm, The results of the COMSOL mulyiphsics when infiltration of the air holes for the PCF by vapor liquids instead of air, due the change value of the effective refractive indices of the VOCs, the power of the transmission spectrum of laser decreased after infiltration with change in the center wavelength of the laser diode

تصنيع مواد متوافقة احيائيا للعظام التعويضية باستخدام الليزر ووسائل تقليدية Fabrication of Biocompatible Material for Bone Implants Using Laser and Conventional Means

اسم المؤلف: هدیل فیاض عباس
اسم المشرف: رائد عبد الوھاب اسماعیل ولید خلف حمودي
الموضوع العام: علوم الليزر
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The present work describes coating the titanium implants with biocompatible materials (ceramics or composites). Three techniques were implemented to materialize this work; these are : pulsed laser deposition, spray pyrolysis, and electrochemical deposition. In these techniques, the influence of deposition temperature, solution concentration, polymer and H2O2 addition, buffer layer sandwiching, and electrolytes combinations were tested. The obtained films’ properties were investigated by using Fourier Transform Infrared Spectroscopy (FTIR), Atomic Force Microscope (AFM), Optical Microscope, X - ray Diffraction (XRD), Scanning Electron Microscope (SEM), Vickers’ hardness instrument, and Simulated Body Fluid (SBF).Composite films prepared by pulsed laser deposition showed the formation of polycrystalline hydroxyapatite of low crystallinity due to the addition of polymeric shrimp crusts. These films had (80 - 90 nm) spherical grains and constitute only (20 - 25%) of the favorable range (80 - 200 nm), and good hardness (≈550 HV). Pure hydroxyapatite (ceramic) films had (11 - 15 nm) surface roughness and an average grain size of (48 - 65 nm) which represents (7 - 31%) of the favorable range. All these films were porous, have good adhesion, and uniform surface morphology. Best results of pulsed laser deposition technique were obtained at 125oC deposition temperature. Films prepared by spray pyrolysis showed porous polycrystalline A and B - type carbonated hydroxyapatite and single crystalline α - Ca3(PO4)2; of relatively low crystallinity and hardness increased with deposition temperature. Post annealing at 400oC and 800oC for film prepared at 350°C of (0.0325 M) solution concentration has raised the hardness from 222 HV to 488 HV and 1204.25 HV respectively. The films of (0.0325 M) solution concentration had (101 - 105 nm) average grain size and were (78 - 100%) of the favorable range, whereas the films of (0.0406 M) solution concentration had (92 - 96 nm) and made (74 - 100%) of the favorable range. Good bioactivity and adhesion strength were obtained from these films which were enhanced significantly after post annealing. Optimum results were obtained from films prepared at 350oC of (0.0325 M) solution concentration after post annealing. Films prepared by electrochemical deposition technique showed uniform and highly porous polycrystalline B - type carbonated hydroxyapatite and polycrystalline α - Ca3(PO4)2. These films had an average grain size of (66 - 93 nm) when prepared from ((NH4)2HPO4 and Ca(NO3)2) whereas the grain size was (87 - 118 nm) when prepared from (Na3PO4 and Ca(NO3)2) with low roughness values. They had (45 - 68%) and (64 - 87%) respectively of the useful grain size in the favorable range (80 - 200 nm). The films covering area increased after H2O2 addition. These films had poor adhesion but this slightly improved together with the roughness after a buffer layer was deposited.The composite films had low crystallinity, grain size, hardness, and poor adhesion. Films prepared at 70oC from both electrolytes combinations ((NH4)2HPO4 with Ca(NO3)2, and Na3PO4 with Ca(NO3)2) had the best surface morphology and crystallinity with an optimum hardness (≈475HV). All these films had very fast dissolution rate in Simulated Body Fluid. Spray pyrolysis deposition technique proved to be the most promising technique for biocompatible materials fabrication for bone implants requirement

فعالية المضاد البكتيري لاكاسيد المعادن النانوية المحضرة بواسطة الاستئصال بالليزر في سائل Antibacterial Activity of Metals Oxide Nanoparticles Induced by Laser Ablation in Liquid

اسم المؤلف: فرح عبد الكريم عبد الامير
اسم المشرف: خولة صلاح خشان غسان محمد سلمان
الموضوع العام: علوم الليزر
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: With the increasing of bacterial resistance against antibiotics, nanoparticles studies was appeared together with growing need for substituting theseantimicrobial agents. Recently, it has been demonstrated that metal oxides nanoparticles exhibits bactericidal effect against both bacteria strains.In this research, three kinds of metal oxide nanoparticles (Nickel oxide, Copper oxide and Titanium dioxide) colloidal solutions synthesized using laser ablation of nickel, copper and titanium pellet immersed in de - ionized water. Pulsed Nd : YAG laser with 1٠٦٤ nm wavelength and different laser energies (40, 80, 120, 160 and 200 mJ) was used to irradiate the targets for various ablation times : 5 (75 pulse), 10 (150 pulse), 15 (225 pulse) and 20 min (300 pulse).The UV - Visible absorption spectrum of NiO nanoparticles exhibited broad bands whose intensity decreased continuously above ~210 nm. The UV - Visible absorption spectrum of the CuO nanoparticles solution showed absorption peak around ~275 nm and another peak with low intensity around ~645 nm. While absorption spectrum of TiO2 nanoparticles exhibited strong absorption domination on the spectrum below ~360 nm. In all three metal oxide nanoparticles, absorption intensity increased with the laser energy and ablation time due to increase nanoparticles concentrations in liquid. Fourier Transform Infrared spectroscopy characterization confirmed the formation of metal oxide nanoparticles. All three metal oxides nanoparticles gave absorption bands below ~600 cm−1 arising from inter - atomic vibrations. X - ray Diffraction pattern of nanoparticles proved the presence of (111), (200) planes which belong to NiO and ( - 111), (112) planes that assigned to CuO and (101), (112), ( - 403) planes that related to TiO2. TransmissionElectron Microscopy measurement showed NiO, CuO and TiO2 nanoparticles with nearly spherical shapes and sizes at 2 - 21 nm, 3 - 40 nm and 6 - 30 nm respectively.The antibacterial activity of nanoparticles carried out against four types of bacteria : Escherichia coli, Pseudomonas aeruginosa, and Proteus vulgaris (gramnegative bacteria), Staphylococcus aureus (gram - positive bacteria) firstly by liquid medium method. 1000 μg ml - 1 concentration was the best - used concentration of nanoparticles for inhibiting growth of both bacteria strains. Among the three tested types of nanoparticles (NiO, CuO and TiO2) at highest concentration (1000 μg ml - 1), TiO2 NPs showed the highest antibacterial activity against Escherichia coli and Pseudomonas aeruginosa. NiO NPs showed the highest antibacterial activity against Staphylococcus aureus while CuO NPs showed the highest antibacterial activity against Proteus vulgaris. Results also indicated that metal oxide nanoparticles and amoxicillin would have a synergistic effect on inhibiting of bacterial growth. Amoxicillin showed inhibitory rate about 74.8% against Escherichia coli and 76.28% against Staphylococcus aureus. In the case of NiO, CuO and TiO2 nanoparticles at concentration 1000 μg ml - 1 with Amoxicillin, antibacterial activity of Amoxicillin enhanced to about 81.5%, 90% and 81.9% against Escherichia coli and to about 86.9%, 91% and 90.7% against Staphylococcus aureus. Therefore, CuO nanoparticles and amoxicillin have the best synergic effect on inhibiting both bacteria strains. The antibacterial activity of the three metal oxides nanoparticle combined with Amoxicillin was also tested by well diffusion method against Escherichia coli and Staphylococcus aureus. In this method, CuO NPs at concentration 1000 μg ml - 1 along with Amoxicillin showed the highest inhibition zone against Escherichia coli (26.0±1.00 mm), while showed complete inhibition of bacteria against Staphylococcus aureus.

دراسة عملية تثقيب شرائح الزجاج باستخدام ليزر CO2 Investigation Of Glass Sheets Hole Drilling Using CO2 Laser

اسم المؤلف: لينا زكي يحيى محمد
اسم المشرف: حسين علي جواد
الموضوع العام: علوم الليزر
السنة: 2013
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تشخيص دقائق البلاديوم النانوية المحضرة بطريقة بوليول Characterization Of Prepared Palladium Nanoparticles By Polyol Method

اسم المؤلف: اسراء كريم عبد الله
اسم المشرف: زينب فاضل مهدي
الموضوع العام: علوم الليزر
السنة: 2014
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة طيفية لاحدى الجسيمات النانوية المحضرة بطرق مختلفة A Spectroscopy Study on Nanoparticles Prepared by Different Methods

اسم المؤلف: ايلاف اياد كاظم
اسم المشرف: وجيهة عبد الدائم لازم حسن عبود
الموضوع العام: علوم الليزر
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بابل
الصفحات الاولى:

دراسة تاثير اشعة الليزر متعدد الاطوال الموجية على بعض خصائص الدم Study effect the multi-wavelength laser radiation on some characteristics of blood

اسم المؤلف: هدى كاظم محسن
اسم المشرف: صادق حسن لفتة سامي عبد الحسين حبانة
الموضوع العام: علوم الليزر
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بابل
الصفحات الاولى:

دراسة الخواص التركيبية البصرية والكهربائية لغشاء كبريتيد النحاس النانوي المحضر Investigation Of Structural , Optical And Electrical Properties Of Prepared Nano CuS Thin Film

اسم المؤلف: علياء ماجد يحيى الطائي
اسم المشرف: زينب فاضل مهدي
الموضوع العام: علوم الليزر
السنة: 2012
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى: