Show: 25 50 75 100 Results

Search results: 25 out of 822

تحضير ودراسة جسيمات الفضة النانوية وتاثيرها المضاد للبكتيريا == Preparing and Studying Nano Silver Particles and Their Anti Bacterial Effect

Author name: سماح صباح عبد الرزاق
Supervisor name: ثامر عبد الجبار جمعة
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The target of this research is to prepare nano silver particles by laser ablation in both deionized and magnetized water. The properties of nano silver particles and their bacterial effects with different parameters’ were studied. The magnetic water was laboratory preparing by square magnets with magnetic flux of 200 mT applied on the deionized water which pass through it 10ns Q.swiched Nd - YAG laser of wave length 1064nm with different energies and different laser pulses number were used with and without applied electric field. Optical properties for the nano silver colloidal by UV - Vis technique was investigate. The absorption for the silver spectrum was found lied at 420 - 430nm, i.e. involved visible region. The absorption peaks have different height due to different both the shape and concentration of nano silver in the colloidal.TEM technique was used for investigating both size and shape of nano silver particles. The nano silver particles have different shapes such spherical, spindles, etc…. depending upon two parameters is laser energy and laser pulses number. The effect of nano silver particles on bacteria growth of three types of bacteria (staph, ps., E.coli) were studied in details under effect of applied electric field of 3000V/m. There is no inhibition zone was obtained when used different silver colloidal except the colloidal prepared under 600mJ and 1000laser pulses, where this colloidal gives an effected property and ability to determine the bacteria growth type ps. In the range of inhibition of 25nm.The results of the TEM show that the shape of nanoparticles affecting the growth of bacteria was spherical and its size ranges between32 - 50nm.

محاكاة لمتحسس بايولوجي باستعمال الالياف البلورية الفوتونية == Simulation of Biosensor Using Photonic Crystal Fiber

Author name: زينة خليفه حمد الدليمي
Supervisor name: احمد كمال احمد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تشكل الياف القلب المجوف والقلب الصلد النوعين الرئيسين من الالياف البلوريه الفوتونيه, ان وجود ثقوب هوائيه في هذه الالياف يساعد على حجز الموجات الكهرومغناطيسيه داخل منطقه القلب كما يساعد في تغيير خصائص الانتشار في الالياف.ان امكانية ملئ هذه الالياف بالسوائل يساعد على تطوير خصائصها البصريه. في هذا البحث تمت دراسة نوعين من الالياف البلوريه الفوتونيه كعناصر تحسس في القياسات الاحيائيه.تم دراسة تاثير حقن الليف البصري بسوائل مختلفه نظريا باستخدام طريقة العناصر المحددة. نفذت عملية حقن الليف المجوف (ماخوذ من القلب 19 خليه) وليف مجوف(ماخوذ من القلب 7 خليه) بسوائل مختلفه ( الماء, الماء الثقيل, بينتانول , دم انسجة الكبد البشريه, دم انسجة القالون البشريه والدم لبشرة الجلد). حسبت خسارة الحبس نظريا باستخدام عدة اطوال موجيه لليف البلوري الفوتوني, وجد ان خسارة الحبس تتناقص تدريجيا للاطوال الموجيه الاصغر كلمزااد معامل انكسار الماده المحقونه. وحسبت قيمة التحسسيه نظريا بالاعتماد على تغير الفقدان في حجز الضوء للنمط الاساسي لليف المحقون بالسائل.وجد ان اعظم حساسيه كانت في مادة الدم لبشرة الجلد وتساوي 674.603 لكل معامل انكسار لنوع وافضل مجال كهربائي وجد لنفس الماده انه يساوي 671 لكل فولت على متر.بينما اعظم حساسيه في نوع وجد انها تساوي 147.201 لكل معامل انكسار لمادة القولون وافضل مجال كهربائي كان في هذه الماده ويساوي 366 لكل فولت على متر. تم اخذ الالياف البلوريه الفوتونيه مصمه باقطار مختلفه وايجاد توجيه الليزر باطوال موجيه تتراوح من (1600 - 600) نانومتر داخل الليف البصري البلوري باستخدام برنامج | Solid and hollow cores comprise two sorts of photonic crystal fibers (PCF). The presences of air holes in PCF serves to both confine electromagnetic waves within the core of the fiber and manipulate its propagation characteristics. the potential of filling the PCF with liquids may improve their optical characteristics. In this thesis, both sorts of PCF were investigated as sensing measurements of biological elements. The impact of liquid filling hollow core PCF was studied theoretically using finite element method. Infiltrated HC19 - 1550 (19 cells are taken from the core) and HC - 1550 (7 cells are taken from the core) PCFs with different liquids (water, heavy water, pentanol, colon tissue, liver tissue and epidermis human skin) were applied. Confinement loss was computed theoretically and found that the confinement loss decreased to shorter wavelengths with increased the refractive index of the liquids. Amplitude sensitivity was computed theoretically by deeming the change in confinement loss for the fundamental mode of liquid filled PCF. The maximum amplitude sensitivity was found to be 674.603 in epidermis blood and the best electric field was found to be 671 V/m in the same liquid for HC19 - 1550, while the maximum sensitivity in HC - 1550 is 147.201 for colon tissue with best electric field found to be 260 V/m also in the colon tissue. Photonic crystal fiber has been taken in different diameters and laser guided by wavelengths from (600 nm - 1600 nm) inside the optical crystal fiber using Comsol multiphysics program

استخدام طريقة للتبع نقطة الطاقة القصوى على اساس الحرارة للسطوح الكهروضوئية باستخدام برنامج PSPICE == Maximum Power Point Tracking approach based on Temperature for PV Surfaces using PSPICE program

Author name: حارث محمد سعيد حامد
Supervisor name: زينب منذر يونس كبة
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: This research study the effect of Photovoltaic surface temperature on Photovoltaic panel output characteristics. First, circuit simulator PSPICE was used to compose Photovoltaic panel model at 75 W, 4.8 A and 21 V. Then, study the behaviorof it under varying conditions (solar insolation, environmental temperature and PV panel surface temperature). ABM feature of PSPICE was used to include the above parameters in PV PSPICE model and produced temperature dependent voltage. The voltageconverted to current with galvanic insolation by element Gploy with gain 0.8. The model defined as hierarichal block in PSPICE library and could be called as individual source for any applications.After studying the effect of PV surface temperature on its (IV) curves specially the position of the maximum power point, this temperature was used to keep tracking of the optimal voltage for the PV panel at the MPP. Therefore DC - DC boost converter was used to achieve this purpose.Boost converter was raise a PV panel voltage from 17 V to 34 V for all variation of surface temperature from 300 K to 350 K at frequency 10 KHz and ΔVo = 5 V.

تاثير المسافة بين الاقطاب ومادة الهدف باستخدام الترذيذ المغناطيسي ذو التيار المستمر == The Effects of Electrodes Separation and Target Material by DC Discharge Magnetron Sputtering

Author name: بان فيصل رشيد
Supervisor name: خالد عباس يحيى
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تتكون منظومة الترذيذ البلازمي من حجرة تفريغ اسطوانية مصنوعة من مادة (Bolosilicate) وتحتوي على قطبين دائرين من st. st. يحمل الكاثود, مادة الهدف وكذلك المغناطيس الثابت اما قطب الانود فيحمل النماذج الزجاجية التي سوف يتم طلاءها .في هذا البحث استخدمت مادتي الذهب والفضة كمادة لهدف. الهدف من هذه الدراسة, هو دراسة تاثير عوامل التشغيل مثل, المسافة بين القطبين ونوع مادة الهدف على خصائص اشكال سطح زجاجي مطلي بوجود المجال المغناطيسي والتي تمت دراستها باستخدام مجهر القوة الذرية (AFM). وايضا تم تحديد درجه حرارة الالكترون وكثافة الايونات والالكترونات واعلومات البلازما الاخرى بواسطة مجس لانكمور المنفرد عند ضغط ثابت (0.2 mbar).اظهرت نتائج هذه الدراسة بينت وجود زيادة خطية في كثافة الالكترونات والايونات وانخفاض اسي في درجة حرارة الالكترونات عند تغير المسافة بين القطبين ولخمسة قيم و(3,4,4.5,5 and 6)cm لمادتي الذهب والفضة وايضا تبين ان فولتيات التفريغ باستخدام الذهب كهدف هي اكبر منها في حالة الفضة. كذلك, وجد انه بزيادة المسافة بين القطبين فان درجة حرارة الالكترونات تقل لمادتي الذهب والفضة وكثافة الايون تزداد مسببة زيادة في قطر وارتفاع الحبيبة لتيار الترذيذ((I_d=30 mA باستخدام الذهب بينما يقل قطر الحبيبة ويزداد ارتفاعها باستخدام الفضة لتيار الترذيذ( (I_d=40 mA. من ناحيه اخرى, ان قيم درجة حرارة الالكترون باستخدام الفضة هي اكبر من القيم باستخدام الذهب وان علاقة قطر الحبيبة, وارتفاعها وخشونة السطح كدالة للمسافة بين القطبين هي ليست خطية. اصغر قيمة لمعدل قطر الحبيبة وارتفاعهاحصلنا عليه هو(90 nm) وnm)6) على التوالي لمادتي الذهب عند تبار الترذيذ ((I_d=30 mA و( . (d=4 cm وللفضة نفس قيمة قطر الحبيبة باستخدام الذهب عند(d=5 cm) لكن بارتفاع5.5 nm) ) عند (d=4 cm) ولتيار الترذيذ (I_d=40 mA). واصغر معدل ارتفاع للحبيبة لكل تيارات التفريغ 20,30,40,50 and 60 mA)) عند نفس المسافة بين القطبين (d=4 cm) باستخدام الفضة والذهب ولكل تيارات التفريغ ماعدا((〖 I〗_d=50 mA والذي يمثل اكبر معدل ارتفاع للحبيبة فيه باستخدام الذهب. واخيرا, ناتج عملية الترذيذ باستخدام الفضة اكبر مما عليه باستخدام الذهب. | In this work, a DC planner magnetron sputtering system used. Which consists of a cylindrical chamber, made from (Borosilicate). It contains two circular electrodes made from stainless steel. The cathode electrode is carried the target material and permanent magnet while a glass sample, which must coat, is placed on the anode electrode. In this works, gold and silver used as a target materials. The objective of this study is to examine the effects of operating parameters such as, electrodes separation, sputtering current, and type of target materials on the properties of glass surface coated under the influence of magnetic field. The surface morphology for the coated samples are studied by atomic force microscopy (AFM). Furthermore, electron temperature, ion and electron densities and other plasma parameters are determined by a cylindrical single Langmuir probe where the pressure up to(0.2 mbar). It is found that a linear increase in electron and ion densities and an exponential decrease in electron temperature with five values of electrodes separation (3,4,4.5,5 and 6) cm. That was observed for gold and silver target materials. Also, the discharge voltage using gold target is greater than that for silver target. Electron temperature decreased for gold and silver targets as the electrodes separation increased. The ion density increased which caused increasing in average grain diameter, height at sputtering current, Id=30 mA , when the target is gold. However, the average grain diameter is decreased and the height of grain increased at Id=40 mA using silver target. On the other hand, the values of electron temperature using silver target is greater than that for gold target. Also, the relation of average grain diameter, height and roughness surface as a function of electrodes separation are nonlinear. The minimum average values of grain diameter, height are (90 nm) and (6 nm) respectively for using gold at Id =30 mA and d=4 cm. For using silver at Id =40 mA the minimum average grain diameter is also (90 nm) at d=5 cm and height is (5.5 nm) at d=4 cm. For all discharge currents (20,30,40,50 3and 60 )mA , the minimum average grain height at the same electrodes separation d=4 cm for using silver and gold target except the value of Id=50 mA, whom a maximum average grain height is obtained. Finally, the sputtering yield for silver target is greater than that for gold target

تقييم السطح البيني لمنطقة الربط الكرافيت بالمعدن == Evaluation of the Intermediate Layer of Graphite Bonded Metal

Author name: مريم بديع عبود
Supervisor name: ثامر عبد الجبار جمعة
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: This work investigates the joining between graphite and stainless steel grade (410), by using active filler metal paste. Brazing technique was chosen because it is efficient, verstile, fast and economical.These new phases considered enhancement the bonding strength of the assembly.

تصنيف الاداء الموجه وغير الموجه لصور الاقمار الاصطناعية == Supervised and Unsupervised Classification Performance Satellite Images

Author name: حسن سالم عبد المجيد
Supervisor name: ليث عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: One of the main purposes of remote sensing satellite images is to interpret the observed data and classify features. Satellite image classification plays a major role in the extraction and interpretation of valuable information from massive satellite images.The primary purpose of this research is to classify multi - spectral Thematic Mapper satellite images using supervised classification. Unsupervised (RGB color model) and supervised classification (maximum likelihood method) is adopted to achieve the classification purpose. The classification accuracy depends upon the selection accuracy of the training area.PCA Transform is adopted and applied on the original bands to create the principal component images. The first three principle component image contains most the information in all the original bands. For this purpose the first three principle component images are chosen as RGB images to create a colored image.This colored image has been employed for determining and selecting the training areas which are very important for supervised classification after applying histogram equalization enhancement method on the colored image to make the selection of the training area more clarity and accuracy. After that the selection of the training areas is ready as an input for the supervised classification.Our results showed that the image with higher variance value doesn't represent a prerequisite in image clarity. The variance with mean value may reflect the quality of the image. The variance and means look like the torque in physics. So that we can see that the image with low variance and mean value near the middle of the dynamic range value has more quality than the image with high variance and mean value near the edge of the minimum or maximum value. Improve the selection of the training area (region of interest) visually plays an essential role in increasing the accuracy of supervised classification and this reflects on the calculation of the area for each class in the scene. In the present work, the overall accuracy increased from 68.5% to 98.9%after adopting the histogram equalization technique as an enhancement technique in improving the selecting the training area visually.Although a high classification accuracy with principal component image, but still the classification process with original bands is better because its values represent the real spectral reflectance. The result of classification accuracy with the original bands is enhanced from 68.5% to 97.08% and became very comparable with the result of classification accuracy with the principal component images 98.86% when the selection of the training area (region of interest) has been improved visually.In this thesis, the ENVI (Environment for Visualizin Images) software version 4.5 has been used to achieve the aim of this study.

تحضير النشاط الاشعاعي وتقيم مخاطره الاشعاعية لبيئة مصفى الدورة والمناطق المحيطة به

Author name: جعفر جليل سلطان الطائي
Supervisor name: ندى فاضل توفيق
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The objectives of the present study were to measure the level of the radioactivity Al - Dora refinery and surrounding area. The study includes : The first. the radon gas concentration in soil samples from Al - Dora refinery and dust samples from surrounding area by using "sealed can technique" and CR - 39 track detector to registration alpha tracks emitted from radon gas in (soil and dust) samples. The second. Detect of the radionuclides and measure the specific activities in soil and water samples using gamma ray spectroscopy system with HPGe detector. The measured soil, water and dust samples were taken from (40) samples, 27 soil samples (surface, 15 and 30cm depth), 8 water samples and 5 dust samples. The detecting of naturally occurring radionuclides (226Ra belong to 238U series, 228Ac belong to 232Th series and one natural radionuclide 40K) in the (soil and water). And estimate the radium equivalent (Raeq), absorbed dose rate in air (ADRA), hazard index (Hex, Hin) and annual effective dose equivalent (AEDE) in soil samples of Al - Dora refinery and surrounding area.The radon concentration in surface soil samples ranged from (290.709 to 394.534 Bq/m3 with an average 365.925 Bq/m3). The radon concentration in soil at the depth 15 cm was ranged from (294.862 to 346.775 with an average 324.164 Bq/m3) and at the depth 30 cm was ranged from (228.633 to 288.414with an average 254.947 Bq/m3). The surface exhalation rate in surface soil samples ranged were ranged from (0.601, to 0.816 with average 0.757Bq·m−2.h−1), in soil samples at the depth 15 cm ranged from (0.61 to 0.717 with average 0.671 Bq·m−2·h−1) and in soil samples at the depth 30 cm ranged from (0.47 to 0.597 with average 0.527 Bq·m−2·h−1). The mass exhalation rate in surface soil samples were ranged from (0.469 to 0.639 with average 0.59 Bq·kg−1·h−1), in soil samples from depth 15 cm ranged from (0.457 to 0.559 with average 0.523 Bq·kg−1·h−1) and in soil samples at the depth 30 cm ranged from (0.368 to 0.465 with average 0.411 Bq·kg−1·h−1).The specific activities for radionuclides (226Ra, ٢28Ac) in surface soil samples were ranged (from 11.725, 15.41 to 59.08, 36.17 Bq/kg respectively) with an average (33.621 and 22.375 Bq/kg respectively) and the specific activity of 40K radionuclide ranged (from 328 to 424.9 with average ٣٦٣.٤٥ Bq/kg). At 15 cm depth ranged (from 18.047, 14.613 to 39.71, 21.673 Bq/kg respectively) with an average (30.527 and 19.66Bq/kg respectively), the specific activity of 40K radionuclide ranged (from 201.3 to 391.3 with average٣٢٦.٧٣ Bq/kg). At 30 cm depth ranged from 17.94, 12.89, to 45.766, 23 Bq/kg respectively) with an average (30.393 and 18.124 Bq/kg respectively), the specific activity of 40K radionuclide ranged (from 231.4 to 351.3 with average ٣١٠.٩٤Bq/kg).For water samples ranged (from 1.60, 1.025 to 8.805, 13.52Bq/kg respectively) with an average (5.031 and 2.925 Bq/kg respectively), the specific activity of 40K radionuclide ranged (from 11.462 to 18.58 with average ١٥.٧٧٨Bq/L).The average values of Raeq, Hin, Hex, ADRA, and the annual effective indoor and outdoor doses in soil and water samples were, in surface (93.70 Bq/kg, 0.309, 0.226, 39.755 nGy/h, 0.198 mSv/y, 0.049 mSv/y), in 15cm depth (83.582 Bq/kg, 0.34, 0.2٥2, 44.34 nGy/h, 0.227 mSv/y, 0.055 mSv/y), in 30 cm depth (80.253 Bq/kg, 0.299, 0.217, 38.051 nGy/h, 0.189 mSv/y, 0.047 mSv/y), and in water (10.428 Bq/kg, 0.042, 0.028, 4.788 nGy/h, 0.024 mSv/y, 0.006 mSv/y).

معالجة رقمية وتحليلية للاثار الناتجة من التشعيع بالمصدر النيوتروني 241Am - 9Be على بعض كواشف الاثار النووي للحالة الصلبة == Digital Processing and Analysis for the Tracks Produced From the Irradiation with Neutrons Source 241Am - 9Be on Some of Solid State Nuclear Track Detectors

Author name: مصطفى يوسف رجب
Supervisor name: حسين علي الجبوري
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: Image processing technique was used in a lot of studies and research and it concluded , including a number of mathematical relations . In this study , two programs were used , the first one; MATLAB program and second Image - J program . These programs were used to tracks analysis of α - particles on the nuclear track detectors type CR - 39 and CN - 85 . Where irradiated detectors by thermal neutrons from (241Am - 9Be) source with activity 12Ci and neutron flux 105 n.cm - 2.s - 1 . Which obtained on incident α - particles for detectors through 10B(n, α)7Li interaction after covered it with boric acid H3Bo3 pellets . The irradiation times - TD for both detectors were 4h , 8h , 16h and 24h .Through the analyze irradiated detectors of using MATLAB outputs for found the following relationships : a)The irradiation time - TD has behavior linear relationships with following nuclear track parameters, Total track number - NT, Maximum track number - MRD (with depended on track diameter - DT at range of radiation response region 2.5μm - 4μm and 2.5μm - 5μm for CR - 39 and CN - 85 detector respectively) and Maximum track number - MD (without depending on track diameter - DT). b) The irradiation time - TD has behavior exponential relationship with maximum track number - MRA (with depended on track area - AT ) at range of radiation response region 7μm2 - 24μm2 and 9μm2 - 35μm2 for both CR - 39 and CN - 85 detector respectively. c) The irradiation time - TD has behavior a logarithmic relationship with maximum track number - MA (without depending on track area - AT).While through the analyze of outputs Image - J program for irradiated detectors found the irradiation time - TD has behavior linear relationships with following nuclear track detector parameters : a) Total track number - NT. b) Maximum track number - MRA (with depended on track area - AT ) at range of radiation response region 12 μm2 - 24μm2 and 5 μm2 - 27μm2 for both CR - 39 and CN - 85 detector respectively. c) Maximum track number - MA (without depending on track area - AT)This study show that MATLAB program was more analytical and accuracy from Image - J program , through the logarithmic behavior for both detectors between irradiation time - TD with the maximum track number - MA (without depending on track area - AT). There is the possibility of future use image analysis of MATLAB program in the other nuclear track parameters analysis , including ; etched velocity - Vt, , track diameter - Dt , critical angle of nuclear track - θt , nuclear track depth - Dp .The image analyze technique for nuclear track detector which obtained from this study especially with regard to track diameter - TD can be take into account for classification of α - particle emitters , In addition to introduce this technique in preparation of nano - filters and nono - membrane in nanotechnology fields

تحضير ودراسة المركبات SnxBa4Ca2Cux+4Oy وYnBa5Cun+5Oy == Preparation and Characterization of the SnxBa4Ca2Cux+4Oy and YnBa5Cun+5Oy Compounds

Author name: رؤى فخري هادي
Supervisor name: عماد خضير الشكرجي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The present study includes the preparation of SnxBa4Ca2Cux+4Oy and YnBa5Cun+5Oy compounds with (x = 3, 4, 5, 6, 7) and (n=3, 5, 7) by solid state reaction (SSR) method. The study was to conclude the superconductor behavior of both compounds. The prepared samples were analyzed by Meissner effect primary, and the excess oxygen content was measured by using Iodomertric titration method. The samples characterized by XRD patterns with computer program that was used to determine the value of lattice constant, Scanning Electron Microscope (SEM), Energy dispersive X - ray spectroscopy (EDS) to study the grain morphology and also resistivity measurement was performed by Van der Pauw method to conclude the nature of behavior.The resistivity measurement results of Sn - Ba - Ca - Cu - O system showed that the semiconducting behavior, increases with decreasing the temperature toward low temperature, the lowest and the highest normal resistivity were found at x=6 and at x=4, respectively. The system Y - Ba - Cu - O showed a superconductor behavior with high transition temperature, the Tc at n=3 of about (113.6 K), the sample prepared with n=5 has Tc=113 K, meanwhile the sample prepared with n=7 has Tc=105 K.The x - ray analyses for SnxBa4Ca2Cux+4Oy samples showed that the tetragonal structure, and the c - parameter increased by increasing the value of (x) until reach to maximum value at x=5 then return back decreasing at x=6 and 7. The x - ray diffraction analysis of the compound YnBa5Cun+5Oy has orthorhombic phase and when Y - atom concentration and the number of CuO2 layer increased tend to increase b and c - axis.The Scanning Electron Microscopy (SEM) results showed that the appearance of nanostructure in Sn6Ba4Ca2Cu10O22 and Sn7Ba4Ca2Cu11O24 samples in the range (100 - 300 nm), whereas the other samples of Sn - familywas a microstructure. On the other hand, the Y - 358 had large grains randomly comparable with Y - 5 5 10, Y - 7 5 12 addition to absent the interfaces distances from Y - 358. The results of EDS showed that the agreement of the peaks appeared with the theoretical values.

تصنيع وتوصيف مفتاح بلازما الومضة الكاذبة ذو القدرة العالية == Construction and Characterization of Pseudospark High Power Plasma Switch

Author name: بسمة حسين حمد الشمري
Supervisor name: احمد كمال احمد | كمال حسين لطيف
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:

محاكاة عامل تراكم الجرعة لاشعة كاما متضمنا تاثير اشعة الفناء للالمنيوم، والحديد والرصاص == Simulation of Dose Buildup Factor of Gamma Ray Including Annihilation Radiation for Aluminum, Iron and Lead

Author name: مروة صباح مهدي
Supervisor name: لؤي ادور جورج | ليث عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: A computer program based on Monte Carlo method had been designed and written in visual basic computer language and utilized for simulating the classic problem of gamma ray beam incident on finite plane slabs of absorbing materials. The source geometry adopted in this program is plane normal source.Dose buildup factor of gamma photons in the absence and presence pair production effect have been calculated in the energy range (4 - 10) MeV for aluminum, iron, and lead up to 5 mean free path thickness.Some of physical parameters has been studied and the simulation results indicates the following remarks : • Gamma ray buildup factor increases with the increase of the thickness for the three shielding materials, this increase in dose buildup factor is due to the increase of scattering with the small angles and with the increase of the thickness of the material.• Dose buildup factor for low atomic number material (Al, Z=13) is higher than that for medium (Fe, Z=26) and heavy (Pb, Z=82) material for the same photon energy (10MeV). A rapid decrease of the buildup factor values with the increase of Z is seen. This dependence is in a good agreement with the fact that the proportion of the cross section for Compton effect decreases with increasing atomic number, therefore the Compton effect plays a more significant role in lighter materials which have lower atomic number (Z).• Dose buildup factor is inversely proportional with the increase of energy within the studied enrgy range (4 - 10)MeV. This behavior can be explained that the cross section for Compton scattering within the studied energy range is decreased with increase ofenergy and this means that the probability of scattering is decreased and it is finally reflected on the buildup calculation, since the scattering plays an important role in determination of buildup factor.The rate of increase in the value of dose buildup factor in lead (Z = 82) higher than iron (Z = 26), and the last is more than that for aluminium (Z = 13). This is due to the effect of pair production interaction which is directly proportional with the square of atomic number.Dose buildup factor in the presence of pair production is higher than dose buildup factor in the absence of pair production effect. The deviation between the values of dose buildup factor in the presence and absence pair production is increased when the energy is increased within the studied energy; this mainly due to the increase of cross section for pair production values within the studied energy range.

دراسة الخصائص النووية التركبية والانتقالات الكهرومغناطيسية لانوية Kr ، Xe ، Nd ، Ge الزوجية - الزوجية باستخدام نموذج البوزونات المتفاعلة == Study of Nuclear Structure Properties and Electromagnetic Transitions for even - even Kr , Xe , Nd , Ge Nuclei in the Framework of Interacting Boson Model

Author name: عبد القادر سعد عبد القادر
Supervisor name: سعد ناجي عبود
General topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: لقد تم في هذا البحث دراسة التركيب النووي والانتقالات الكهرومغناطيسية لبعض النظائر (الزوجية - الزوجية ) Nd , Xe , Kr وGe باستخدام النموذج الجماعي ( نموذج البوزونات المتفاعلة الثاني IBM - 2 ) . تم الحصول على نتائج لمستويات الطاقة، والانتقالات الكهربائية B(E2) , الانتقالات المغناطيسية B(M1) , ونسبة الخلط (E2/M1) ، وعزم رباعي القطب الكهربائي ، وعزم ثنائي القطب المغناطيسي ، والانتقالات احادية القطب . ولقد تم مقارنة النتائج مع القيم العملية المتوفرة وقد وجد انها متقاربة ومقبولة . ان نظائر ال Kr (Z=36 ) تقع في المنطقة الانتقالية القريبة من التحديد الاهتزازي. ولقد تم حساب مستويات الطاقة B(E2) ، B(M1) ، (E2/M1) وX(E0/E2) لبعض الانتقالات المختارة باستخدام نموذج البوزونات المتفاعلة الثاني (IBM - 2) وان جميع النتائج قد قورنت مع القيم العملية. لقد كان لمعاملات ماجيرونا اثرا كبيرا في حساب مستويات الطاقة , , , التي حددت انها تمتلك صفات تناظر مختلطة . لقد تم مقارنة نتائج نظائر Xe التي تم الحصول عليها من نموذج IBM - 2 مع التوقعات النظرية لتماثل النقطة الحرجةE(5) . وتبين ان 128Xe هو ليس نظير يقع ضمن E(5) كما اقترح مسبقا . لذا فان نسبة الطاقة لنظير ال Xe128 ( ) تقع بين E(5) وحدود - softγ . وبذلك فحسب هذه النسبة فان 128Xe يجب ان يقع بين E(5) وO(6). غالبا ما يكون اختبار 130Xe مناسب لنظائر Xe ، والذي يظهر خصائص E(5) بافضل حالته. كذلك فان مستويات الطاقة تعزز وجود هذا النظير ضمن E(5) . اما بالنسبة لنظائر 132Xe و134Xe فانها تظهر صفات مشابهة للمحدد الاهتزازي SU(5) . ان مستويات التناظر المختلطة قد تم التعريف عليها من نظائر Xe وهذا قد مكننا من تعقب تحرير فونون واحد لحالة في سلسلة النظائر ( الزوجية - الزوجية ) للزنون من الاهتزازات القريبة من N=82 الى نواة - softγ باتجاه منتصف القشرة . لقد درسنا الخصائص النووية لنظائرNd (A=144 - 154) في IBM - 2 وتم الحصول على نتائج جيدة مقارنة بالقيم العملية . 144 - 150Nd يقع في المنطقة الانتقالية ( الاهتزازي - الدوراني ) SU(5)→SU(3) .بينما نظائر 152 - 154Nd فانها تقع ضمن التحديد الدوراني (SU(3)) . ان X(5) سوف ياخذ مكان او حيز عندما يستمر بحركته بين تناظر U(5) الى تناظر ال SU(3) ويظهر ذلك بصورة واضحة ما بين مستويات الطاقة وقوى الانتقال رباعي القطب E2 . لقد وجد حديثا ان سلسلة نظائر Nd تشير الى الانتقالات الطورية كما ان نظير Nd150 يعرضا الخواص المتوقعة ل X(5) . على العموم فان هناك عدة دراسات مفصلة بحاجة للحصول على تلك المؤشرات . وبالنهاية نستنتج بان بعض نظائر Nd تكتشف خواص X(5) . ان , هي حالات تناظر مختلطة لنظائر Nd ان نموذج البوزونات المتفاعلة IBM - 2 كان ناجحا بوصفه للخواص التجميعية للنواة . وفي هذا البحث قد تم الاهتمام بالتطبيقات النظامية والمتضمنة اشكال البوزونات المختلطة.ان النظائر الجرمانيوم ( الزوجية - الزوجية ) لها اهتمام خاص بسبب وجودها ضمن مجموعتين من الحزم ذات الخواص المعقدة للنواة الخفيفة . ان نموذج البوزونات المتفاعلة IBM - 2 مع التركيبات المختلطة يجهز توصيف جيد لكلا الحالات المبينة بالمستوى الارضي وللبروتونات الموجودة بالمستوى المتهيج عبر غلاف القشرة Z =28 المغلق . لقد تم دراسة نظائر الجرمانيوم وتبين انه يتدرج مابين وسط قشرة البروتون والقشرة المزدوجة القريبة من المغلقة عند ال 82Ge . ولقد وجد ان نظائر الجرمانيوم عند التشكيل Nπ=2 تاخذ الشكل الاهتزازي وعند التشكيل Nπ= 4 تاخذ الشكل الدوراني ( ويزداد التشوه) . وفي هذا العمل استخدمت طرق حديثة جدا لتعيين الشحنات الفعلية (effective charge) للبوزونات وذلك باستخدام القيم العملية للانتقال رباعي القطب (0_1^+ 2_1^+ B(E2; وكذلك استخدمت طرق جديدة لحساب المعاملات الجيرو مغناطيسية للبوزونات gυ ، gπ وذلك بمعايرتها الى القيم العملية لـ B(M1) وδ (E2/M1) . | Nuclear structure Properties and electromagnetic transitions of some even - even Kr, Xe, Nd and Ge isotopes have been studied in this work, by using the collective Interacting Boson Model - 2 (IBM - 2). The Interacting Boson Model (IBM - 2) has been very successful in describing the collective properties of nuclei. This work concerns a systematic applications of the model, involving configuration mixing of bosons.There have been extensive IBM studies of low - lying positive parity bands, which are based on the ground state and the quadrupole degree of freedom. The results for energy levels, B(E2), B(M1), mixing ratios , quadrupole and magnetic dipole moments and monopole transitions, were compared with some previous experimental and theoretical values. It was found that an acceptable degree of agreement between the predictions of the IBM - 2 and the experiment can be achieved. The Kr isotope (Z = 36) lies in the transitional region closer to the vibrational range of nuclei. Energy , levels B(E2), B(M1) and the mixing ratios δ(E2/M1) and X(E0/E2) for selected transitions in this isotope were calculated in the framework of the interacting boson model (IBM - 2). All results were compared with experimental data. Some experimental X(E0/E2) ratios were calculated from available experimental data. Majorana parameters were found to have a great effect on the calculated energy levels of the , , and states which indicates they have mixed symmetry properties. The results of IBM - 2 for Xe isotopes were compared with the theoretical predictions assuming a critical point symmetry E(5) which leads to conclude that 128Xe is not an E(5) isotope as previously suggested. In this case of the 128Xe the observable is intermediate between the value for E(5) and gamma soft limit . The ratio suggests that 128Xe should lie between E(5) and O(6). Similar test using 130Xe as a most likely candidate amongst the Xe isotopes, conclusively demonstrate a how well E(5) is realized in the best case. The energy ratio confirmed that this isotope an E(5) critical point symmetry. The 132Xe and 134Xe show vibrational - like character (SU(5) limit). Mixed symmetry states are also studied. It is found that some of the mixed symmetry states with moderate high spins change very fast with respect to the Majorana interaction. Under certain conditions, they become the yrast state or yrare state. These states are difficult to decay and become very stable. This study suggests that a possible new mode of isomers may exist due to the special nature in their proton and neutron degrees of freedom for these isotopes. The mixed - symmetry states or at least a fragment of it have been identified in Xe isotopes. This enables us to trace the evolution of the one - phonon states in the even - even xenon isotopic chain from the vibrators near N = 82 to the γ - soft nuclei towards mid - shell. We have studied the nuclear properties of Neodymium isotopes with (A =144 - 154) in IBM - 2. A good agreement results with the experimental data. 144 - 150Nd lie in the transitional region (virational - rotational limit SU(5)→SU(3)). For the 152 - 154Nd isotopes the energy ratio are well described by the rotational limit SU(3). The X(5) symmetry would take place when moving continuously from the pure U(5) symmetry to the SU(3) symmetry and it implies a definite relations among the level energies and among the E2 transition strengths. It was recently shown that a signature of phase transition is observed in the chain of Nd isotopes, 150Nd display the predicted features of the X(5) symmetry and mark therefore the critical point. However, more detailed studies and experiments are needed to get ideas about this signature. At the end, we have concluded that some of Nd isotopes display X(5) symmetry features. The and are mixed symmetry states in Nd isotopes. The even - even isotopes of germanium are of special interest because of the coexistence of two sets of bands, of very different character, in the lighter nuclei. The IBM - 2 with configuration mixing provides a good description, both of states built on the normal ground state and of those associated with a proton pair excitation across the Z =28 closed - shell gap. Ge isotopes are studied, ranging from the middle of the neutron shell to very near the doubly closed shell at 82Ge. Same Hamiltonian is used for all the nuclei studied, with parameters which are constant or smoothly varying

تخمين معاملات زيوغ العدسه المغناطيسية باستخدام الحل التحليلي لمعاده المسار القريب من المحور == Magnetic Lens Aberration Coefficients Estimation by Using the Analytical Solution for the Paraxial Ray Equation

Author name: رشا يوسف حمد
Supervisor name: عدي علي حسين | خالد عباس يحيى
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: اجريت دراسة نظريه باستخدام الصيغه التحليلية لمعادله المسار شبه المحوري للالكترون وذلك لتحديد افضل الخواص البصريه للعدسة المغناطيسية. تم دراسهة معاملات الزيوغ كمعاملات الزيوغ الكروية, اللونيه, التشويه القطري واللولبي. اعتمد في هذا البحث انموذج الشكل الناقوسي لكلاسر لتمثيل توزيع المجال المحوري للعدسة المغناطيسية. وقد اخذ بنظر الاعتبار حالتين للزخم الابتدائي في الحسابات بوجوده او عدم وجوده في الحالتين. ان الوصول الى امثل النتائج قد انجز من خلال تغير بعض المعاملات المؤثرة مثل نصف العرض عند نصف الحد الاقصى(a= 2.01, 2.02, 2.03 and 2.04 mm), والحد الاعلى لكثافة الفيض المغناطيسي (Bm= 0.001, 0.002, 0.003 and 0.004 Tesla) وزاوية انبعاث الالكترون (0.2, 0.4, 0.5 and 0.6 rad= θ).من خلال النتائج تبين ان افضل قيم a تساوي 2.04 mm في حاله وجود او عدم وجود الزخم الابتدائي في الحسابات. وقد وجد ايضا ان كل من قيم الزيغ الكروي, اللوني والتشويه اللولبي يقل بزيادة a, بينما اقل قيم للزيغ الكروي والتشويه القطري في الحاله الاولى عندBm يساوي 0.004 Tesla.ووجد ايضا ان افضل الزوايا للالكترون (θ = 0.2 rad) وهي تتناسب طرديا مع معاملات الزيغ اللوني والتشويه اللولبي.ومن جهة اخرى تبين ان الزيغ الكروي والتشويه القطري له قيم سالبه وهذه المعاملات ممكن استخدامها كمصحح في المنظومات البصرية. | A theoretical investigation is carried out by using an analytical expression for paraxial trajectory of an electron in a magnetic lens to estimate the optimum properties of the magnetic lens. The aberration coefficients of the magnetic lens are studied, such as the spherical, chromatic, radial distortion and spiral distortion aberration coefficients. The Glaser's bell - shaped model is adopted to represent the axial field distribution of magnetic lens. The initial momentum of the electrons is taken into account, where the calculations are made for two cases : when the electrons have zero and non - zero initial momentum values . The optimization role is achieved by changes some of the effective parameters at the range of the half - width at half maximum (a = 2.01, 2.02, 2.03 and 2.04 mm), the maximum magnetic flux density (Bm = 0.001, 0.002, 0.003 and 0.004 Tesla) and the electron emission angle (θ = 0.2, 0.4, 0.5 and 0.6 rad). In the present results the optimum values for both cases of the initial momentum is found at the half - width at half maximum equal to 2.04 mm, and the values of the spherical, chromatic and spiral distortion aberration coefficients decreased as the half - width at half maximum (a) increased, while the minimum values of the spherical and radial distortion aberration coefficients are found at Bm = 0.004 Tesla in the first case. However the best angle is found at θ = 0.2 rad which is directly proportional which chromatic and spiral distortion aberration coefficients. On the other hand the calculations appeared that the negative values for both spherical and radial distortion aberration coefficients are estimated and these coefficients can be used as corrector in the optical systems.

محاكاة حاسوبية لجهاز صوتي بصري لنظام فوتوني == COMPUTER SIMULATION OF AN ACOUSTO - OPTICAL DEVICE FOR PHOTONIC SYSTEM

Author name: مروة كمال مصطفى
Supervisor name: اياد عبد العزيز العاني | احمد كمال احمد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: Acousto - optics science deals with the interaction between sound and light waves. Acousto - optic waves are most important in transferring signals through the communication systems, since modulating signals takes a great advantages in the field of communication engineering, bio - medical, laser beam deflection and laser intensity modulation.The aim of this work is to simulate the fundamentals of an Acousto - Optic Modulator. The simulation procedure is based on theoretical and computational relationships describing acousto - optic properties for three selected materials which are “Glass, Germanium, and Tellurium - Oxide”. Two computer programs have been written using “MATLAB” software, the first used to verify the normalized intensity of the diffracted orders versus peak phase delay using partial differential equation, while the second program is used to study the normalized intensity of the electric field versus time wave propagation and electro - magnetic wave propagation in x, y and z directions, using Finite Difference Time Domain. The results for Glass and Tellurium - Oxide materials shows that the periodic exchange of the normalized intensity between the zero and first orders becomes smaller as the interaction length D increase, this indicate that the higher orders may appear very clear in these materials. The results for the Glass material show that the normalized intensity of the electric field increases with increasing electromagnetic wave propagation in x, y and z directions.

ضغط الصوت باستخدام الكسوريات == Fractal Audio Compression

Author name: وسام فوزي جاسم محمد
Supervisor name: لؤي ادور جورج | ليث عبد العزيز العاني
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: لقد استحدثت طرق ضغط عديدة باستخدام تقنيات مختلفة الغرض منها تحقيق نسب ضغط عالية مع المحافظة على جودة الصوت المضغوط, مع الاخذ بنظر الاعتبار انجاز الضغط باقل وقت ممكن.طريقة الضغط الكسوري هي احدى هذه الطرق التي يرافقها ضياع بالبيانات وتعتبر من طرق الضغط الحديثة وتعتمد على عملية ايجاد مجاميع محددة وصغيرة من المعادلات الرياضية التي تصف الاشارة . بارسال معاملات هذه المعادلات الى محلل الشفرة يمكن اعادة تشكيل الاشارة الاصلية.بايجاز ضغط الصوت الكسوري يعتمد على مبدا نظام التكرار المجزئPIFS) ). ضغط الصوت الكسوري يستغل ال(Affine redundancy) والتي تتواجد في الصوت, هذه ال (redundancy) ترتبط بالتشابه الذاتي للصوت.بكلمة اخرى ضغط الصوت الكسوري يقوم بايجادالا نماط المتشابهة والتي تتواجد بقياسات مختلفة(different scales) واماكن مختلفة(different places) في الصوت, وبعد ذللك يقوم بحذف اكثر ما يمكن من ال(redundancy).هذا البحث يهدف الى محاولة التحقق من امكانية تطبيق الضغط الكسوري في عملية ضغط الصوت. النظام المعتمد يتكون من مرحلتين : المرحلة الاولى مرحلة التشفير(Encoding Unit) والثانية مرحلة فك التشفير ) .(Decoding Unitفي مرحلة التشفير يجزا الصوت الاصلي الى نوعين من الكتل, كتل تدعى كتل المجال المقابل ((Range Pool وهي كتل غير متداخلة, وكتل تدعى كتل المجال (Domain Pool) والتي من الممكن ان تكون متداخلة. ومن ثم يتم تقطيع الصوت باستخدام طريقة التقطيع المتساوي للكتل الى كتل متساوية الحجم. بعد ذلك يتم ايجاد افضل كتل في المجال لكل كتلة في المجال المقابل وذلك بتطبيق احد انواع التحويلات وتدعى((Affine Transformation .تنتهي مرحلة التشفير بخزن تفاصيل (معاملات )هذه التحويلات لكل كتلة من كتل المجال المقابل .ان عملية ايجاد الكتل المتشابهة تتطلب عمليات حسابية معقدة تستغرق وقت طويل وهذا ما يؤخذ على طريقة الضغط الكسوري كنقطة ضعف.ان البرامجيات التي تم بناؤها لهذا الغرض تم اختبارها باستخدام خمسة نماذج لبيانات صوتية. لقد تم تنفيذ النظام المعتمد باستخدام فيجوال بيسك6.0 كلغة برمجة, تم استخدام معدل الخطا التربيعي((MSE ونسبة الاشارة الى التشويش((PSNR كمعاملات حساب دقة النتائج المستخلصة من التقنية الكلية في النظام المعتمد.و كانت بعض النتائج المستخلصة من البحث هي بالنسبة للعينة الاولى في حالة حجم الكتلة تساوي (60 ) فان نسبة الضغط (15.51 : 1), اما العينة الثانية في حالة حجم الكتلة تساوي (40) فان نسبة الضغط (11.51 : 1), وفي حالة حجم كتلة صغيرة كما في العينة الثالثة والتي تساوي (20) فان قيمة ال(PSNR) جيدة وتساوي (35.76 dB), وكذالك للعينة الاولى في حالة حجم الكتلة تساوي (10) فان قيمة ال(PSNR) تساوي (45.63 dB). | Fractal audio compression is based on the concept of a partitioned iterated function system (PIFS). Fractal audio compression exploits the affine redundancy that is commonly present in audio; this redundancy is related to the similarity of an audio with itself. In other words, fractal audio compression finds similar patterns that exist in different scales and different places in audio, and then eliminates as much redundancy as possible. In this work the possibility of implementing fractal audio compression is investigated. The implemented system consists of two major units; the first is the Encoding unit and the second is the Decoding unit. Encoding is done by partitioning the range pool (which is the original audio) into non - overlapping blocks, called range blocks, and partitioning the domain pool (which is the result of the original audio after down sampling) into overlapped blocks with the same size of range blocks called domain blocks. A fixed size - partitioning scheme is used to partition the domain pool and the range pool. After generating the range and domain pools, for every range block, the best - matching domain block in the domain pool is searched for by performing a set of affine transformations on them. Thus the encoding is completed by saving the optimal affine parameters for every range block. The Decoding process can be done by repeatedly applying the affine transformation on an initially blank audio and its subsequent reconstructed audio, until it completely reconstruct an approximate wave to the original audio. The time required to compress an audio file is affected by the size of each block being extracted from the proceed audio file; this means smaller block size implies longer time required to compress the corresponding audio file.The implemented system was tested using five wave samples of data. The proposed work was implemented by using Visual Basic (6.0) as a programming language, the fidelity measure MSE and PSNR were used to check the results of the whole implemented technique. The best results obtained from the implemented system were for the test (sample - 1) in case were block size equal to (60) the compression ratio is (15.51 : 1), also for test (sample - 2) were block size equal to (40) the compression ratio is (11.03 : 1), and for small block size as in test (sample - 3) were the block size is (20) the value of the PSNR is good that its equal to (35.76 dB), also for test sample - 1 when the block size is (10) the PSNR value (45.63 dB).

معالجة رياضية لدراسة تغير التركيب المسامي مع ظروف التشكيل للمواد المسامية == Mathematical Manipulation to Study the Changes of Porous Structure with the Formation Conditions of Porous Materials

Author name: سديم عباس فاضل القصاب
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: تم تطوير نموذج مجسم يصف عملية االتكثيف خلال عملية الحرق الزجاجي (التزجيج) لمادة تحتوي على محتويات صلبة. هذا النموذج تم تطويرة من نموذج سابق للباحث Scherer والذي وضع نموذج يصف عملية التكثيف خلال عملية الحرق لمادة لا تحتوي على محتويات صلبة.النموذج المطور استخدم لمحاكاة معدل التكثيف خلال عملية الحرق لمواد سيراميكية غير متجانسة تتكون من خليط من بعض الاطيان العراقية والتي تم تحضيرها من بحث سابق. النموذج المطور تم استخدامة لدراسة تاثير عدة عوامل على عملية التكثيف خلال عملية الحرق وهي درجة حرارة الحرق، زمن الحرق والنسبة بين حجم المواد الصلبة الى حجم السائل الزجاجي، كما استخدم النموذج المطور في تقدير قيم اللزوجة الفعالة للسائل الزجاجي المتكون خلال عملية الحرق. كذلك تم تطبيق نموذجان اخران للمواد غير المتجانسة هما نموذج الكرة المركبة ونموذج المكون الذاتي وجرى استخدامهما لدراسة تاثير درجة حرارة الحرق وزمن الحرق على عملية االتكثيف لغرض مقارنة النتائج من هذين النموذجين مع نتائج النموذج المطور. كذلك تم استخدام النموذج المطور لدراسة تاثيرتوزيع حجوم المسامات على عملية التكثيف وذلك بفرض توزيع كاوس لحجوم المسامات واعادة صياغة المعادلات للموديل المطور لجعلها تعتمد على الانحراف المعياري لتوزيع حجوم المسامات. العوامل الفيزيائية مثل اللزوجة تم حسابها من خلال عملية المطابقة (fitting ( للنتائج العملية لعملية الحرق للنماذج. تم تصميم برامج حاسوبية بلغة ( (FORTRAN 90لدراسة تاثير درجة حرارة الحرق على عملية االتكثيف باستخدام النموذج المطور، نموذج الكرة المركبة ونموذج المكون الذاتي. هذة البرامج تم تحويرها فيما بعد لمحاكاة عملية االتكثيف كدالة لزمن الحرق. كذلك برنامج اخر تم تصميمة لدراسة تاثيرتوزيع حجوم المسامات على عملية التكثيف خلال عملية الحرق باستخدام النموذج المطور. النتائج من برنامج الموديل المطور تحقق افضل مقاربة للنتائج العملية تليها النتائج من برنامج موديل الكرة المركبة. النتائج من برنامج تاثيردرجة حرارة الحرق تشير عموما" الى زيادة معدل االتكثيف مع زيادة درجة حرارة الحرق، رغم ذلك، عندما تكون نسبة المواد الصلبة عالية نسبيا" فاءن اللزوجة تزداد عند الدرجات الحرارية العالية (حوالي 1400سo ) يعزى ذلك الى عملية نمو بلوري محتملة، وعلية يؤدي ذلك الى نقصان معدل االتكثيف. النتائج من برنامج تاثير زمن الحرق تشيرالى ان النموذج المطوريتنبا بزيادة شبة لوغارتمية للكثافة النسبية مع الزمن، بينما يتنبا النموذجان الاخران ( نموذج الكرة المركبة ونموذج المكون الذاتي) بزيادة اسية للكثافة النسبية مع الزمن. النتائج من البحوث السابقة تتفق مع توقع النموذج المطور. النتائج من برنامج تاثيرتوزيع حجوم المسامات على عملية التكثيف تدل على ان هذا العامل لة تاثير قوي عندما يكون التوزيع عريضا" فقط على المراحل النهائية لعملية التكثيف لان المسامات الكبيرة غلقها بطىء نسبيا". | A mathematical model describing the densification process during viscous sintering process of a material contains solid inclusions is developed (modified) from a Scherer model which describes the rate of densification during sintering for a free solid inclusions material. The modified model is used to simulate the rate of densification during sintering process for ceramic heterogeneous materials consist from mixtures of some Iraqi clays that had been prepared in a previous work. In addition the modified model is used to study the effect of several factors on densification during sintering process and used in predicting the effective viscosity of the viscous phase that formed during sintering. The factors are the sintering temperature, sintering time, and the ratio of solid inclusions volume to viscous phase volume.Another two heterogeneous models which are the composite sphere and the self consistent models are also applied and used to study the effect of sintering temperature and sintering time on densification during sintering for comparison with the present developed model.The modified model is also used to study the effect of pore size distribution on densification process by assuming a Gaussian distribution for the pore sizes and reformulating the equations of the modified model to make them depend on the standard deviation of pore size distribution.The physical parameters like viscosity are computed from the fitting process of the practical data of the samples.Computer programs in FORTRAN 90 language are designed to study the effect of sintering temperature on densification process using the developed model, the composite sphere and the self consistent models. These programs are modified to simulate the densification process versus time duration of the sintering process. Another program is designed to study the effect of pore size distribution on sintering process using the developed model. The results from the developed (modified) Scherer model are better fit the practical data, then the composite sphere model. The results from the program of the effect of sintering temperature indicates in general that the rate of densification is increased with increasing sintering temperature, this is due to the decrease in the viscosity with temperature increasing. However, when the ratio of the solid inclusions is high the viscosity is increased at relatively high sintering temperatures (about 1400oC) this increase in viscosity may be due to induced crystallization processes, accordingly the rate of densification is decreased at these circumstances.The results from the program of the effect of sintering time indicate that the modified model predicts that the increase in density is semi logarithmic with time, while the other two models predict an exponential increase with time. The results from the program of the effect of pore size distribution indicate that this parameter has a strong effect if the distribution is broad only in the last stages of densification because the largest pores are relatively slow to close

دراسة تاثير المحاليل الالكتروليتيه على خواص العزليه الكهربائية للبورسلين المشكل من مواد محليه == A STUDY OF THE EFFECT OF ELECTROLYTE SOLUTION ON THE PROPERTIES OF ELECTRICAL INSULATOR PORCELAIN FORMED USING LOCAL MATERIAL

Author name: عتاب فاضل حسين
Supervisor name: فاضل عبد رسن | ازهار جواد داوود
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: يهدف البحث الى دراسه تاثير المحلول الالكتروليتي ونسب تركيزه على الخواص الكهربائية والفيزيائية لجسم البورسليني الذي تم تحضيره باستخدام مواد محليه عراقيه. تم تشكيل الجسم بور سليني من كاؤلين دويخله،رمل زجاج ارضمه، فلدسبار وبنسب وزنيه (45 %, 30% , 25%) على التوالي. ولقد اجريت معامله كيميائية لكل من الكاؤلين والسليكا بهدف تنقيتها من الشوائب التي يمكن ان تذوب بحامض الهيدروكلوريك حيث تمت دراسة التغيرات الحاصلة من خلال تحاليل . IR قسمت الدراسة الى سبعه مجاميع محضره من هذه المواد طبقا لنسب المضافة من المحلول الالكتروليتي المحضر من (NaCO3+NaSiO3) وبنسبه (2 : 1) ان نسب اضافات المحلول الالكتروليتي هي 0.7%,1%) ,0.5% 0.2% , 0.1%) حيث ثبت نوع ونسبه الماده المعدنه في تشكيل الجسم البورسليني وهي او كسيد الزنكZnO وبنسبه (.(2% تم تشكيل مكبوسات من هذه الخلطات وبعد التجفيف تم حرقها لدرجات حرارة مختلفة1350oC) (1250, 1300 اجريت القياسات العزليه الكهربائية (ثابت العزل ومعامل الفقدان العزلي) وكذلك التوصليه الحرارية وقابليه الانضغاط. ان النتائج المتحققة لنماذج المحروقه بدرجه 1350oC ا بد ت نمط من ثبوت قيم العزليه الكهربائيه عند حدود معينه من تراكيز المحلول الالكتروليتي المضاف لمكونات الجسم البورسليني ضمن مدى((0.2 - 0.1% , في حين هنالك تغير في قيم التوصليه الحراريه ضمن مدى (0.2 - 0.5%) من تركيز المحلول الالكتروليتي. وان قابليه الانضغاط تكون عاليه عند حدود (0.5%) من تركيز المحلول الالكتروليتي لنفس المكونات،وبالتالي يتطلب اعتماد مفاضلة في الخواص وحدودها لاختيار افضل تركيز المحلول الالكتروليتي بما يوفر توافق نتائج الخواص العملية مع الخواص الصناعية القياسية المتحققة على منتجات محضره من مواد بلدان اخرى ومعتمدة لديهم ، لقد تم اعتبار ان افضل تركيز يتوافق مع الخواص العزليه الكهربائية وكذلك التوصليه الحرارية والميكانيكية هو (0.2%) كما اشاره اليه النتائج. | This study was carried out to prepare a porcelain samples, which can be used as an electrical insulator. The raw materials used for the preparation are kaolin Duakhla, Arudhma Sand glass and Potash feldspar with weight percentage (45%, 30%, 25%) respectively. A chemical treatment was performed on kaolin Duakhla, Arudhma Sand glass to remove all the impurities. The effect of the washing by HCl acid (chemical treatment) was examined by IR Tech. The study divided into seven groups. Relating to the concentration of electrolyte solution which is consisting of (NaCO3 & NaSiO3) as a ratio (2 : 1), and for fixed percentage of mineralizer (2%ZnO). The concentrations of electrolyte which were added to these groups are (1%, 0.7%, 0.5%, 0.2%, and 0.1%). Samples of each group have been prepared, and then each sample was pressed, then after that these samples are dried and sintered for different temperatures (1250, 1300, 1350 oC). Dielectric measurement (Dielectric Constant& Dielectric loss index) were carried out for these pressed samples, also Physical properties “Thermal conductivity” and mechanical properties “Compression strength” were measured for these samples. The results of these measurements for samples sintered at 1350oC are found to have a stable change at the range (0.1 - 0.2%) of concentration of electrolyte solution. While there is a change in the results of thermal conductivity in the concentration range (0.2 - 0.5%) of electrolyte solution. And the values of compression strength is found to be high at 0.5% concentration of electrolyte solution. Therefore we should select the best concentration of electrolyte solution, to get the optimum properties which would agree with practical results and the standard properties for the attentive in other countries of the world. Then, can regarde the (0.2%) concentration of electrolyte solution is the optimum value that can be used in the industry of the electrical insulators

دراسة النشاط الاشعاعي الطبيعي للمخلفات النفطية == A study of the natural radioactivity of thepetroleum waste

Author name: عصام محمد رشيد درويش
Supervisor name: ندى فاضل توفيق | كريم خلف محمد
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: The aim of this study is to detect the radioactivity of radionuclides and measure the specific activities and the uranium concentration in (30) samples of crude oil and oil waste were brought from three oil locations Dora refinery, Bijie refinery, and north field of al - Rumaila. The measurements in this study were done by using two techniques : 1 - Gamma rays spectroscopy system was used to measure the specific activity for radionuclides. This system is consist of high purity of germanium detector (HPGe) with personal computer as multi channel analyzer (MCA) that computerized to plot the radioactive spectrum and compute the specific activities of the radionuclides. There are seven radionuclides are detected : (Bi - 214, Ra - 226, TI - 208, Bi - 212, Pb - 212, K - 40, and Cs - 137), these radionuclides included; two radionuclides (Bi - 214,Ra - 226) belong to the U - 238 series, three radionuclides (TI - 208, Bi - 212, Pb - 212) belong to Th - 232series, one natural radionuclide (K - 40), and one artificial radionuclide (Cs - 137).For Dora refinery samples, the averages of specific activities of (Bi - 214, Ra - 226) were (7.79, 16.08) Bq/kg respectively, the averages of specific activities of (TI - 208, Bi - 212, Pb - 212) were (7.95,4.05,5.75) Bq/kg , the average of specific activities of (Cs - 137) was (0.64) Bq/kg , the average of specific activities of (K - 40) was (99.3) Bq/kg. For Bijie refinery samples, the average of specific activities of (Bi - 214)was (0.39) Bq/kg, the averages specific activities of (Bi - 212, Pb - 212)were (0.02,0.01) Bq/kg, the average of specific activities of (K - 40) was(2.28) Bq/kg , and three radionuclides (Ra - 226, TI - 208, and Cs - 137) werenot appeared in Bijie samples.2 - solid state nuclear track detectors technique (SSNTDs), the uraniumconcentration determined by using CR - 39 track detector and fissionfragment track technique, the nuclear reaction used as source of uraniumfission fragment is U - 235 (n - f) obtained by the bombardment of U - 235with thermal neutrons emitted from (Am - Be) neutron source with flux(5000 n/cm2.s) for seven days, the concentration were calculated bycomparison with the standard samples.The uranium concentration in Dora refinery samples were rangedbetween (0.95 - 3.34) ppm with average (2.03) ppm for solid samples and(1.25) ppm for liquid samples.The uranium concentration in Bijie refinery samples were ranged from(0.42 - 1.46) ppm with average (0.55) ppm in the solid samples and (1.24) ppm in the liquid samples.The uranium concentration in the north field of al - Rumaila samples were ranged between (1.78 - 6.35) ppm with average (3.37) ppm.From above results, we concluded that the maximum of uranium concentration was found in the north field of al - Rumaila in Basrah governorate, these results are agreement with the permissible limit from IAEA. The maximum of external equivalent dose rate from NORM in oil waste was found in the north field of al - Rumaila was (0.30) mSv/y less than the permissible limit from IAEA which is (1) mSv/y for the public.

حسابات عن الخواص البصريه لعدسه رباعيه الاقطاب كهروسكونيه ثلاثيه == COMPUTATIONS ON THE OPTICAL PROPERTIES OF A TRIPLET ELECTROSTATIC QUADRUPOLE LENS

Author name: اسراء لطيف محمد العميري
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: استعانه بطريقة المصفوفات الانتقاليه والحاسوب الشخصي فقد اجري بحث حاسوبي عن خواص نموذج مستطيلي يمثل المجال المحوري لعدسه ثلاثية كهروسكونيه رباعية الاقطاب، ان مسار حزمة الجسيمات المشحونه الماره خلال المجالات المستطيلية قد تم ايجاده بحل معادلة مسار الحركه بالاحداثيات الكارتيزيه اذ كتب برنامج حاسوبي لهذا الغرض. لقد حسبت الخواص البصريه للعدسة الثلاثية الكهروسكونيه بالاستعانه بمسار الحزمه على امتداد محور العدسه. وكتبت برامج حاسوبيه بفورتران ٧٧ لايجاد مختلف الخواص البصريه. وتم تركيز الحسابات على ايجاد الابعاد البؤرية ومعاملات الزيوغ الكروية في كلا المستويين الافقي والعمودي للمسار على امتداد المحور البصري. وقد اظهرت النتائج ان اختيار المعلمات الهندسية والتشغيلية يعتمد على وظيفة العدسه الثلاثية الكهروسكونية الرباعية الاقطاب في منظومة بصريه الكترونيه او ايونيه معينة.

دراسة الخواص الحراريه للاغشيه الرقيقه الذكيه نوع نيكل - تيتانيوم == Study of Thermal Properties of NiTi Thin Film Shape Memory Alloy

Author name: هديل ثامر خضير
Supervisor name: عماد خضير الشكرجي
General topic: Physics
Specific topic: Physics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: سبائك ذاكرة الشكل (SMA) shape memory alloyاو ما يسمى بالمواد الذكيه هي نوع من السبائك المعدنيه التي تعاني تحولات طور من الاوستنايت الى المارتنسايت عند تعرضها الى حراره او اجهاد كافي للتحول ولها القدره على الرجوع الى نفس حالة الشبيكه قبل التحول عند زوال المؤثر .لقد تم التركيز في هذه الدراسه على الخواص الحراريه كمحاوله لفهم التصرف الذي يحدث في الغشاء الرقيق والذي يتمثل بكسر شريحة الفلم عند تسليط قيمه معينه من الفولطيه والتيار وعند قيمه معينه من حرارة الاساس . وقد اخترنا دراسة غشاء NiTi لان له دور مهم في التطبيقات الطبيه والصناعيه .لقد تم حساب التوصيل الحراري والسعه الحراريه لغشاء NiTi نظـريا وكذلك تم حساب التوصيل الحراري والسعه الحراريه للزجاج المستخدم كاساس للغشاء عمليا وبعدها تمت مقارنة نتاءج هذه الحسابات للغشاء والزجاج وتفسير سبب الكسر في شريحة الغشاء والذي تبين انه يحدث في الزجاج نتيجة للفرق الكبير في الخواص الحراريه بين الغشاء والزجاج وهذا بسبب عدم تحمل الزجاج للطاقه الحراريه العاليه الناتجه خلال عملية تحول الطور بين الاوستنايت والمارتنسايت في الغشاء الرقيق والتي تسلط على الشريحة الزجاجيه للغشاء. | Shape memory alloys (SMA) or intelligent material, which are also called smart material, are a group of metallic alloys that undergo phase transformation from Austenite to Martensite when heated or subjected to appropriate stresses. After cooling or removing the stress, they have the ability to remember their previous structure and return to it.The concern of this study is on the thermal properties of NiTi thin film and its substrate as an attempt to understand the behavior occurring in the thin film slide represented by breaking it at certain values of voltage, current and substrate temperature (Ts). We have selected NiTi alloy because of its important medical and industrial applications. Thermal conductivity and heat capacity of NiTi thin film have been calculated theoretically and the thermal conductivity and heat capacity of glass substrate are measured experimentally. The cause of breaking in the thin film slide is the result of large difference in the thermal properties represented by thermal conductivity and heat capacity between the NiTi thin film and glass substrate. This is because the glass can not bear the high amount of heating energy resulting during the phase transformation process between Austenite and Martensite which exerts on the thin film slide

الحلول العددية للمعادلات التفاضلية باستخدام طريقة التفاضلات التربيعية المعتمدة على دوال السبلاي G == Numerical Solutions of Differential Equations Via G - Spline Based Differential Quadrature Method

Author name: مصطفى اكرم سعيد
Supervisor name: اسامة حميد محمد | فاضل صبحي فاضل
General topic: Mathematics
Specific topic: Numerical Analysis
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: This thesis have two main objectives, namely : 1 - The first objective is to study the mathematical background of the differential quadrature method and its application to solve boundary value problems of the fourth order ordinary differential equations.2 - The second objective is first about function approximation by G - spline interpolation method. Secondly the numerical solution of two applications relating the vibration of a uniform beam problem which are represented by a boundary value problem of the fourth order ordinary differential equation and the vibration of a square thin plate given by a boundary value problem of the forth order partial differential equation, by using G - spline based differential quadrature method have been obtained

حول الحلول العددية لبعض المعادلات التفاضلية الاعتيادية الصدفية == On Numerical Solutions of Some Stochastic Ordinary Differential Equations

Author name: عادل سفيان حسين
Supervisor name: راضي علي زبون الساعدي
General topic: Mathematics
Specific topic: Numerical Analysis
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: الهدف الرئيس لهذه الرسالة هو دراسة بعض الطرق العددية لحل المعادلات التفاضلية الصدفية (Stochastic Differential Equations) حلا عدديا. لقد تم عرض المفاهيم الاساسية لفهم ودراسة الطرق العددية المقترحة.بسبب صعوبة ايجاد الحلول التحليلية لكثير من المعادلات التفاضلية الصدفية، تم استخدام طريقتي اويلر ميرما وميلستين العدديتين. ولقد تم تنفيذ بعض المحاكات العددية لعدد من الامثلة الاختيارية. وقدمت الملاحظات الاستنتاجية الضرورية لذلك.لقد تم كذلك دراسة وتقديم الخطا المطلق، خطا التقارب القوي، خطا التقارب الضعيف بالاضافة الى الاستقرارية الخطية لطريقتي اويلر ميرما وميلستين مدعمة باختبارات عددية.عرضت مع المناقشة المقارنة لانواع مختلفة من التقاربات والخطا العددية للطريقتين (اويلر - ميرما وميلستين) ولبعض الامثلة الاختيارية واخيرا لقد قدمت ونوقشت بعض الاستنتاجات والمقارنات لانواع معينة من الدراسة. مع عرض البرامج الحاسوبية مبرمجة ضمن لغة Matlab Software مع الشروحات الكافية لفهما. | The aim of this thesis is studying some numerical methods for solving Stochastic Differential Equation. The mathematical preliminary required to understand these numerical methods is proposed. Since many stochastic differential equations do not have explicit solution, Euler - Maruyama and Milstein numerical methods are used. The numerical simulation for different selected examples are implemented. The necessary concluding remarks are provided. The absolute error, the strong convergence error, the weak convergence error and the linear stability for Euler - Maruyama and Milstein's schemes are discussed and supported by numerical test problems. The comparison different type of convergence and error between Euler - Maruyama and Milstein's for some test problems are presented. Some conclusions and comparison in some sense have been presented with discussions. The programs coded in Matlab software are also given with useful discussion

توليد المتغيرات العشوائية لتخمين معلات توزيع لوجستك باستخدام محاكاة منت كارلو == Generating Random Variates for Estimating the Parameters of Logistic Distribution by Monte Carlo Simulation

Author name: زهراء امروي علي حيدر الحجار
Supervisor name: اكرم محمد العبود
General topic: Mathematics
Specific topic: Statistics
Degree: Master
Language: English
University location: Baghdad
First pages:
Abstract: In this work, we consider the Logistic distribution of two parameters for its importance in statistics. Mathematical and statistical properties of Logistic distribution are considered, moments and higher moments are illustrated to the distribution parameters, namely, moments methods, maximum likelihood method, modified moments method, least squares method are discussed theoretically and assessed practically by utilizing two procedures of Monte Carlo simulation for generating random variates from the Logistic distribution. Properties of the estimators, such as Bias, variance, skewness, kurtosis and mean square error measurement are tabulated.

طريقة التربيعات الصغرى لايجاد المساحات الماصة لدوال المستوي التربيعية == Least Square Method for Finding Absorbing Areas of Planar Quadratic Maps

Author name: مهند نافع جعفر
Supervisor name: زينب عبد النبي سلمان
General topic: Mathematics
Specific topic: Dynamic Systems
Degree: Master
Language: English
University location: Baghdad
Key words:
  • المساحات الماصة
  • منحنيات الحرجة
  • معادلات التربيعية.
First pages:
Abstract: First objective : introduce the mathematical background of the main notions and proposition on the theory of the dynamical system. Specifically we shall foucus our study on planar nonivertiable continuously differentiable maps T : 22. Definitionof critical curves and some different types of noninvertible maps related to their critical curves and some properties of critical curves are presented.Second objective : we have studied some properties of such kind of maps in particular absorbing areas, invariant areas of such maps. Also, we give proposed algorithm to approximate the equations of the critical curves LCi which cause find an approximated absorbing and invariant areas such as least square method. Third objective : give some illustrative examples that use the proposed algorithm to find an approximated absorbing.

مسالة تصميم نظام سيطرة دينامي غير خطي وتطبيقات للمسائل الفوضـــوية == NONLINEAR DYNAMIC CONTROL SYSTEMS DESIGN PROBLEM AND APPLICATIONS TO CHAOS

Author name: زينب رياض شاكر عبد العظيم الياسري
Supervisor name: راضي علي زبون الساعدي
General topic: Mathematics
Specific topic: Applied Mathematics
Degree: Master
Language: English
University location: Baghdad
Key words:
  • Non - linear control system
  • Chaotic dynamic system
  • Numerical solution of dynamic system
First pages:
Abstract: لقد برزت المعادلات التفاضلية غير الخطية في دراسة انظمة السيطرة غير الخطية وانظمة الفوضى الديناميه وغيرها بشكل فعال ومهم.تعتبر دراسة السلوك الفوضوي من المواضيع المهمة والاساسية في نظرية الانظمة الديناميه وتصميمها. لقد تم في هذه الرسالة تطوير وعرض مشروع عمل جديد لبعض انظمة السيطرة غير الخطية وتصميمها, مستندين على قاعده رياضيه مدعومة بالبراهين الضرورية اللازمة ومرفق معها الخوارزميات العددية الضرورية.لقد تم كذلك عرض بامانه قدر الاستطاعة بعض الاستنتاجات والملاحظات المهمه والضرورية.وكذلك تم عرض بعض التطبيقات المهمه والمرتبطة بالسلوك الفوضوي لبعض الانظمة غير الخطية مثل نظام لورنز Lorenz system) ( غير الخطي الفوضوي , نظام جويس) Chua's system (غير الخطي الفوضوي ودراستهما ومحاولة السيطرة على سلوكهما من خلال تصميم مسيطر خطي او غير خطي ومحاولة عرض نتائج المحاكات العددية المعتمدة على الخوارزميات المسنده على القاعدة الرياضية وعرضها بشكل جداول ومخططات ورسوم. | Non - linear differential equations appear prominently in the study of dynamical control systems, chaotic dynamical systems etc. Chaotic behavior study is very important in the nonlinear dynamical system theory and design.In this thesis, a new scheme and procedure for nonlinear dynamical control system design are proposed and developed. The proposed scheme is based on some suggested theorems. The proofs of the presented Theorems as well as their computational algorithm have been developed and presented. The concluding and necessary remarks have also been discussed. Some real life applications of chaotic dynamic system like nonlinear chaotic Lorenz system and nonlinear chaotic Chua's system have been considered and their non - linear controller have also been designed and developed to overcome the problem of undesirable chaos in these systems.The numerical solutions of chaotic Lorenz and Chua’s system before and after controlling their behaviors are simulated and shown in graphs and tables
1 ... 20 21 22 23 24 ... 33