عرض: 25 50 75 100 النتائج

نتائج البحث: 25 من أصل 1,097

موثوقية نقل بيانات بمعدل عالي باستخدام متعدد المداخل والمخارج لقناة متعددة المسارات Reliability Of High Data Rate Using MIMO For Multipath Channel

اسم المؤلف: ايمان احمد فرحان
اسم المشرف: رعد حمدان ظاهر محمود فرحان مصلح
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: The most important type of MIMO is the Spatial Multiplexing (SM) which is used to increase the data rate depending on the number of transmitted and received antennas. The main challenge of SM is high Bit Error Rate (BER) at low Signal to Noise Ratio (SNR), which leads to increase the power expended, and this not match the modern requirements of communication system.In this thesis, the performance of MIMO system for Space Time Block Code (STBC) and SM has been investigated. As expected the STBC increase the reliability of data rate while SM increase the data rate with significant BER. Three types of detection have been experimented with SM; Maximum Likelihood (ML), Minimum Mean Square Error (MMSE) and Zero Forcing (ZF). The results show that ML is outperform each MMSE and ZF, but as it is known the complexity of ML increase exponentially with number of antennas and modulation order. ZF is simple one, but it has poor performance.The proposed system is to add channel code serially with SM and maintain the low complexity. The experiments are begun with Convolution Code (CC) to support SM performance. The results show that significant improvement is achieved using this code with ZF detection, it can be getting more than 10 dB of SNR as code gain. But the payment is the redundancy information which can be reduced by using puncturing technique. Also the complexity of Viterbi decoder grows exponentially with large constraint length. The second code is a Low Density Parity Check (LDPC) code which is proposed with suitable parameters to reduce the required iterations in order to achieve real time application for such system. The results confirm that the proposedscheme is outperform the CC by 3 dB of SNR in addition to acceptable complexity and less number of iterations

الدالة الغامضة للاشارة الرادارية المرمزة Ambiguity Function Of Radar Coded Signals

اسم المؤلف: اياد عطيه عبد الكافي الجبوري
اسم المشرف: نزار خليل وفي وليد خالد
السنة: 2004
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة انواع متعددة من تر ميزات الاشارة الرادارية حيث تم التركيز في هذه الدراسة على خواص الارتباط والغموض للتر ميزات. كذلك تم التركيز على تاثير دوبلر على تلك الخواص. تم دراسة تاثير الخطا الطوري والتعيير(Weighting) على خواص تلك الترميزات. الدراسة ال | Various types of coded radar signal are studied in this study in terms of their ambiguity and correlation properties. Doppler effect on the ambiguity and the correlation functions of these codes is studied. The effect of phase error and weighting are presented.The study related to Doppler effect covers the frequency, binary and polyphase codes in terms of the peak signal to sidelobes ratio (PSR).Linear FM, nonlinear FM, binary and polyphase codes with various windows, are dealt with respect to the sidelobes response. The simulator built using Matlab version 6. The simulation consists of a code generator; modulator; white noise adder; received signal with time and frequency shifted; matching filtering; a module to find the Doppler effect on the autocorrealtion function and a module to find the peak signal to sidelobes ratio (PSR). It is found that the m - sequences are the best binary codes in terms of PSR and the P4 code is the best Polyphase code in terms of PSR. Also, it is found that the P4 code provides better Doppler tolerant than the other codes. The m - sequences are very sensitive to Doppler shifts. Concerning the frequency codes : it is found that the nonlinear FM is more sensitive than the linear FM i.e., linear FM is Doppler tolerant while the nonlinear is not. Finally, it is found that the use of time weighting produces a response with extremely low sidelobes

تصميم ومحاكاة نظام اتصالات امن يرتكز على النظام الفوضوي عبر قناة كاوس الضوضائية Design And Simulation Of Secure Communication System Based On Chaos Over AWGN Channel

اسم المؤلف: امير كاظم جواد
اسم المشرف: حكمت نجم عبد الله سعد سفاح حسون
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: مع زيادة التطور الكبير الذي يحصل في علم الاتصالات ومع وجود قناة عامة (public channel) تنتقل من خلالها المعلومات زادت المشاكل التي تخص القناة وبالخصوص مشكلتين رئيسيتين هما انتهاك الخصوصية ووجود الضوضاء. بخصوص امنية الاتصال : بما ان القناة عامة وبامكان اي م | With the significant development in communication systems especially with the public channel through which information travels, there are increasing in the channels problems. Among these problems, the two important should be addressed are the information security and the noise. In this thesis, an efficient communication system with high security and high immunity against noise has been proposed. From security perspective, the proposed scheme uses two levels of encryption based on chaotic systems. The first level is chaotic scrambling, while the second level is chaotic masking. Two levels of chaos based encryption make information very secure during their transition in the channel because the key space becomes too large. The simulation results show that the Segmental Spectral Signal to Noise Ratio (SSSNR) of the first level (chaotic scrambling) is reduced by - 5.195 dB in comparison with time domain scrambling. In the second level (chaotic masking), the SSSNR is reduced by - 20.679 dB. It is also show that when the two levels are combined, the overall reduction obtained is - 21.755 dB.Concerning the immunity against noise, the proposed system offers three methods to reduce the effect of noise. The first method is based on sending each scrambled sample more than once. The simulation results showed that gain of this method is 10 dB if we send each voice sample 8 times over the classical method without repetition. The second method relies on the conversion of information from analog to digital format before doing the masking. The simulation results of this method show that the mean square error (MSE) is reduced and this reduction increases as signal to noise ratio (SNR) increase. For instance when SNR=10 dB, the MSE is reduced from ?10?^( - 1) to 2*?10?^( - 2) while it reduced from ?10?^( - 2) to 3*?10?^( - 6) when SNR=22 dB. The third method is increasing the power of the information signal relative to chaotic signal. The simulation results show that when the power is duplicated and at SNR = 24 dB, the MSE is reduced from 3*?10?^( - 3) to 0.5*?10?^( - 4) and to 3*?10?^( - 5) when the signal power is tripled.

تصنيع وتوصيف متحسس اشعة فوق البنفسجية باستخدام اغشية اوكسيد الخارصين الرقيقة Fabrication And Characterization Of ZnO Thin Film Based Uv Photodetectors

اسم المؤلف: الاء كريم حسن
اسم المشرف: رعد حمدان ظاهر غصون محسن علي
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في السنوات الاخيرة، كان هناك اهتمام متزايد في اشباه موصلات اوكسيد الخارصين للتطبيقات الضوئية ضمن منطقة الاطوال الموجية الفوق البنفسجية وذلك لكون طاقة اثارة الربط كبيرة (60 meV) وطاقة الفجوة الواسعة (3.37 eV) في درجة حرارة الغرفة. في هذا العمل, ثلاث متحسس | In recent years, there has been increasing interest in Zinc Oxide (ZnO) semiconductors for optoelectronic applications in the Ultraviolet (UV) region due to its large exciton binding energy (60 meV) and wide bandgap energy (3.37 eV). In this work, three devices of Metal Semiconductor Metal (MSM) UV photodetectors (PDs) and photoconductors (PCDs) based on ZnO were fabricated in the form of Interdigitated (IDT) MSM structures. The ZnO thin films were prepared by sol - gel spin coating technique, and deposited on a P - type Si and glass substrates. The Nickel (Ni) and Aluminum (Al) contacts were deposited by a vacuum coating deposition technique. The morphological, structural and electrical properties of the ZnO thin films were estimated by using Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), X - Ray diffraction (XRD), four - point probe and Hall effect measurements. Optical bandgap of ZnO film was evaluated using a double beam spectrophotometer. With applied voltage in the range ( - 5 to 5 V), the photocurrent, contrast ratio, gain, responsivity, detectivity, and Noise Equivalent Power (NEP) were estimated. The Photodetectors were illuminated with UV of 254 nm at room temperature (27 °C) and under different levels of optical power ranging between (163.2 ?w ? 172.3?w). Current Voltage (I - V) characteristics were studied and the values of the saturation current (I - s), ideality factor (n), barrier height (? - B), reach - through voltage (VRT) and flat - band voltage (VFB) were extracted under dark condition. Data analysis and curves were plotted using origin software (graphing and data analysis). The AFM and SEM images clearly demonstrate the formation of well - aligned ZnO, with smooth nanometer granular structure, dense and a good morphology. The grain size and average roughness (rms) values were found to be (59 nm, 12 nm) on Si substrate and (31 nm, 2 nm) on glass substrate, respectively.For Ni/ZnO/Ni MSM PD on Si substrate, the device has VRT of (0.56 V) and VFB of (1.5 V). The responsivity and detectivity were estimated to be (1.334 A/W and 3×1011cmHz 1/2 W - 1), respectively. I - s was found to be (8.3×10 - 7 A), n (4.4) and ? - B (0.67 eV). However for Al/ZnO/Al MSM PCDs on Si and on glass substrates, the responsivity and detectivity were (0.45 A/W and 1.2×1011 cmHz 1/2W1) and (0.94 A/W and 2.9×1011 cmHz 1/2 W - 1), respectively.The I - V measurement results obtained indicate that, the Ni/ZnO/Ni MSM PD on Si substrate behaves as a typical Schottky contact and the dominant current transport mechanism is field thermionic emission. However semi linear behavior for Al/ZnO/Al PCD on Si substrate and the current flowing through the junction was following thermionic emission mechanism, while a symmetric I - V behaviors and an excellent linear relationship between the current and applied voltage are observed in both direction for Al/ZnO/Al MSM PCD on glass substrate. The estimated responsivities, detectivities with fairly low dark currents make the diodes attractive for practical UV detector applications

تحسين اداء هوائي فيفالدي باستخدام المواد ما بعد المادية Vivaldi Antenna Performance Enhancement Based On Metamaterials

اسم المؤلف: ادهم ربيع عزيز
اسم المشرف: زيد اسعد عبد الحسين طه احمد عليوي
السنة: 2016
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يتطرق البحث الى المتطلبات الاساسية في الانظمه اللاسلكيه الحديثة والضوابط المتوافقة مع امكانية اعادة التشكيل وقابلية التحديث مما ادى الى ان يصب مجال الدارسة في تحقيق تصميم هوائي يمكن له استيعاب ذلك. في هذه الدراسة، صمم هوائي مطوي على اساس هيكل فيفالدي مع | The urgent demands for a miniaturized, compatible, reconfigurable, updatable, and additive - able wireless communication systems for advanced handle held and portable electronics devices are rarely relaxed due to the inherent antenna limitations. In this study, developing a folded microstrip antenna based on a novel antipodal Vivaldi structure based metamaterial inclusions of single negative properties is proposed for wideband applications. Although, Vivaldi antennas show unlimited bandwidth, an acceptable directivity, small size, light weight and easy to fabricate, but, it suffers from low gain due to traveling surface waves effects and therefore, it cannot be embedded inside the integrated systems ,where, the radiation direction is in the end - fire that limits their use to the outdoor applications. Therefore, a remarkable attention was the first in the literature, is proposed in this thesis by introducing single negative metamaterials to the folded antipodal Vivaldi antenna structure. This work is developed based on a systematic approach which can be divided mainly into four parts : First of all, design a single negative metamaterial structure of a surface area 5×5 mm2 on an FR4 - Epoxy substrate. The unit cell properties are evaluated numerically and analytically, then, compared to the measurement. Second, a systematic approach is applied to design an antipodal Vivaldi antenna based flat profile of a corrugated shape with 50×38 mm2 on the FR4 - Epoxy substrate. Third, the best arrive of the flat geometry is folded on a hello Teflon substrate of an elliptical cross - sectional area. Fourth, the folded antenna structure is surrounded by a U - shaped single negative metamaterial array. The performance of the all proposed antennas are evaluated numerically, then, compared to their measurements in both S11 and radiation patterns. It is found that the antenna bandwidth has affected insignificantly by applying the metamaterial structures. However, with respect to the flat antenna model, the gain is increased generally by 6 dB as well as the radiation pattern is oriented to the broadside. It is worth to mention that the achieved enhancement in the gain is mostly attributed to the folded substrate and the metamaterial introduction. While, the bandwidth enhancement is mostly obtained from the folded antenna structure. The optimum structure shows a first mode around 1.4 GHz and the second one at 2.86 GHz, while, the flat antenna only one mode at 1.5 GHz is appeared.Finally, the HFSS, CST MWS, Matlab and ADS software packages are used in this thesis to study the unit cell performance and the antenna structure. Excellent agreements have been found between the simulated and measured results.

منظومات تضمين العامل المتغير الفوضوي Chaos Parameter Modulation Schemes

اسم المؤلف: ابراهيم فهمي علي
اسم المشرف: حكمت نجم عبد الله
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة, تم تصميم منظومتين من CPM وتم تقييم ادائهما في مختلف قنوات الاتصال. اولا, تم اقتراح تقنية فعالة لتخمين القيمة الابتدائية للاشارة الفوضوية في منظومة تضمين القيمة الابتدائية المسماة M - ary ICM. هذه التقنية سميت ب MACE. هذه التقنية قللت من تع | In this study, two Chaotic Parameter Modulation(CPM) schemes are designed and their performance in different communication channels has been evaluated. Firstly, an efficient technique for initial condition estimation of chaotic signal in M - ary Initial Condition Modulation (ICM) scheme is proposed. This technique has been called Maximum Auto Correlation Estimation (MACE). It reduces the complexity of the demodulator; thereby, it minimizes the hardware implementation cost. Simulation results confirm that, the proposed technique outperforms the conventional technique used in direct sequence spread spectrum quadrature amplitude modulation (DSSS - QAM) system in AWGN channel when high modulation level (M) is used. At BER=10 - 3, 16, 256 ary DSSS - QAM achieve gains in Eb/N0 of about 7dB and 0.8dB in comparison with 16, 256 - ary ICM respectively because the modulation level is low. While 1024, 4096 and 16384 - ary ICM achieve gains in Eb/N0 of about 6dB, 10dB and16.5dB in comparison with 1024, 4096 and 16384 ary DSSS - QAM respectively because the modulation level is high. Furthermore, a modified version of ICM that uses BPSK modulation and one chaotic signals source together with MACE technique is proposed to reduce the implementation cost named as BPSK - ICM scheme. Simulation results confirm that, BPSK - ICM has a comparable BER performance to the DS - SS system in AWGN channel.Secondly, the bifurcation parameter of a chaotic signal has been estimated accurately by utilizing the ergodic properties of a chaotic dynamical signal. In BPSK ergodic chaotic parameter modulation (BPSK - ECPM) scheme, the information signal modulates the bifurcating parameter of the chaotic signal. A mean value estimation technique is used at the receiver to retrieve the original information accurately. This method minimizes the computational complexity of the receiver; thereby, reduces the total implementation cost.Simulation results show that, at BER=10 - 3, BPSK - ECPM scheme achieves gains in Eb/N0 of about 1dB, 1.5dB, 5.2dB, 6.5dB, 9dB, 10 dB and 11 dB, as compared with CSS, CC,FM - DCSK, DCSK,CSK,COOK and QCSK schemes respectively in AWGN channel. While in Rayleigh fading channel, at BER=10 - 3, BPSK - ECPM achieve gains in Eb/N0 of about 4.8dB, 5.8dB, 6.5dB and 11.8dB, as compared with FM - DCSK,CSS,CC and DCSK schemes respectively. Furthermore, BPSK - ECPM scheme outperforms conventional chaotic modulation systems in the presence of synchronization error and high data rate problems. Finally, BPSK - ECPM scheme shows a good recovery performance of image signal in multipath fading channel for intelligent transportation system (ITS).

تطبيق الشبكة العصبية في تكوين الشعاع المتكيف لنظام الهوائي الذكي Neural Network Application In Adaptive Beamforming For Smart Antenna System

اسم المؤلف: سليمان احمد غازي
اسم المشرف: عضيد حسن سلومي
السنة: 2015
الموضوع الدقيق: هندسة الكهرباء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: انظمة الهوائيات الذكية تعمل على تحسين الاداء وزيادة في السعة لانظمة الاتصالات المتنقلة. ويمكن لانظمة الهوائيات الذكية حل مشكلة نظام الاتصالات المتنقلة مثل التدخل في نفس القناة، والتاخير الحاصل نتيجة الانتشار والمسارات المتعددة التي تاخذها الاشارة عن طريق | The smart antenna systems are promise to provide performance improvement and capacity increasing for the base station of mobile communication systems. Smart antenna systems can solve the problem of mobile communication system such as co - channel interference , delay spread and multipath by an advance signal processing technology called beamforming. In this work artificial neural networks (Feed Forward Neural Network (FFNN) and feedback Elman Recurrent Neural Network (ERNN) ) are used for smart antenna adaptive beamforming for one and multiple targets.Neural network is used to calculate the optimum weights of antenna array to adapt the radiation pattern of the antenna array by directing multiple narrow beams toward the desired users and nulling interference or unwanted users. FFNN and ERNN are trained by supervised backpropagation learning algorithms, FFNN was trained by using Levenberg - Marquardt (lm),Resilient Back - Propagation (Rprop), Gradient descent with momentum and adaptive learning rate (gdx), Gradient descent and adaptive learning rate (gda) and biasing regulation(br), while lm and Rprop are used to train ERNN..The simulation results show that the best performance of smart antenna adaptive beamforming for one and multiple targets is obtained when the NN (FFNN and ERNN) trained by lm algorithm as compared with other algorithms, since it consider the fastest supervised training algorithm but with more memory requirement. Where the performance of FFNN training phase based (lm) algorithm for single target for five element uniform linear array antenna is [2.746641e - 14] at epoch 27 with best validation performance and best test performance approximately equal to the best training performance. While The performance of ERNN training phase based lm algorithm for single target is [1.121938e - 14] at epoch 38 with best validation performance equal to [1.682442e - 14] and the best test performance is [3.363946e - 14].The neural network model in adaptive beamforming are compared with smart antenna adaptive beamforming based on Least Mean Square (LMS) algorithm, and gave better performance than LMS.

تحليل فحوصات الشد و الانحناء للمواد المركبة متعددة الطبقات Tensile And Flexure Analysis Of Multi-Layers Laminated Composite Materials

اسم المؤلف: سهاد داود سلمان
اسم المشرف: خلدون عبد الجبار الجبوري
الموضوع العام: هندسة الميكانيك
السنة: 2002
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسـة منظومة تحلية المياه بطريقة الترطيب المتعدد التاثير Design Of Multi - Effect Humidification System For Distillation Of Water

اسم المؤلف: رائد سلمان فهد عبد
اسم المشرف: Ghanim Kadhem
الموضوع العام: هندسة الميكانيك
السنة: 2005
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

Study The Effect Of Different Laser Peening Types On Cumulative Fatigue Damage For 7049 Aluminum Alloy

اسم المؤلف: عادل اكرم محمود
الموضوع العام: هندسة الميكانيك
السنة: 2014
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

التاثير البيئي على العزل الحراري للمواد المركبة Environmental Effect On Thermal Insulation Of Composite Materials

اسم المؤلف: الاء جمال مهدي
اسم المشرف: فؤاد صالح فاضل عباس عبد الله
الموضوع العام: هندسة الميكانيك
السنة: 2014
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة عددية وعملية لعدد الريش والسرعة الدورانية على اداء منفاخ هوائي Numerical And Experimental Study Of Number Of Blades And Rotations Speed On Air Blower Performance

اسم المؤلف: محمد عبد النبي كاظم
اسم المشرف: منى صباح فؤاد علوان
الموضوع العام: هندسة الميكانيك
السنة: 2014
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تحقيق عملي وعددي لخواص التبريد لصفيحة هدف تحت ظروف التصادم لهواء مغبر Experimental And Numerical Investigation Of Cooling Characteristics Of A Target Plate Under Dusty Air Impingement Conditions

اسم المؤلف: مصطفى جاسم عواد
اسم المشرف: عدنان عبد الامير عبد الرسول فائق عبد الوهاب حمد
الموضوع العام: هندسة الميكانيك
السنة: 2014
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة عددية وعملية لتوزيع سرع الهواء و درجات الحرارة في مخزن تبريد Numerical And Experimental Investigation Of Air Flow And Temperature Distribution In A Cold Storage

اسم المؤلف: حسام مهدي هادي
اسم المشرف: قاسم صالح مهدي عبد الغني البعلي
الموضوع العام: هندسة الميكانيك
السنة: 2014
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تحليل الجريان في المداخل فوق الصوتي الممسمر The Flow Analysis Of The Spiked Supersonic Intake

اسم المؤلف: توفيق وسمي محمد صالح
الموضوع العام: هندسة الميكانيك
السنة: 2002
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

Numerical Analysis Of Frictional Effect On Supersonic Diverging Nozzle

اسم المؤلف: ياسر شاكر محمد
الموضوع العام: هندسة الميكانيك
السنة: 2007
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

Experimental And Theoretical Investigation Of Composite Materials As Thermal Insulation For Resident Buildings

اسم المؤلف: احمد علي عبد الشهيد
الموضوع العام: هندسة الميكانيك
السنة: 2009
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

الحمـــل المختلـط حول اسطــوانـــة ثابتــة و دوارة مسخنــة Mixed Convection Around Heated Fixed An Rotated Cylinder

اسم المؤلف: محمد عبد احمد الدليمي
اسم المشرف: جلال محمد جليل قاسم صالح مهدي
الموضوع العام: هندسة الميكانيك
السنة: 2006
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

التصميم النظري لمسيطر موازنة الكرة على سطح مستوي Theoretical Design Of A Controller For Ball Balancing On Plate

اسم المؤلف: يوسف امساد زغير
اسم المشرف: سميرة كريم راضي يحيى عبد الله فرج
الموضوع العام: هندسة الميكانيك
السنة: 2006
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

الطبقة المتاخمة الهيدروديناميكية والحرارية الغير مستقرة على صفيحة مسامية Unsteady Hydrodynamic And Thermal Boundary Layers Over A Porous Flat Plate

اسم المؤلف: ايسر منير فليح
اسم المشرف: احسان يحيى حسين عبد الوهاب عبد الرزاق طه
الموضوع العام: هندسة الميكانيك
السنة: 2005
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة نظرية وعملية لتاثير استخدام الارض كمستودع حراري لاحمال التبريد للحيز Numerical And Experimental Investigation Of The Geothermal Heat Sink Effect On Cooling Load Of A Space

اسم المؤلف: واثق عبد الله علي
اسم المشرف: فؤاد علوان صالح علي حسين طراد
الموضوع العام: هندسة الميكانيك
السنة: 2009
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

The Effect Of Weight Distribution On Both, The Drawbar Pull And The Required Steering Track - Forces In Tracked Vehicles

اسم المؤلف: هيثم فالح حسان
الموضوع العام: هندسة الميكانيك
السنة: 2011
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

دراسة تاثير الصدم على الالواح المركبة المقوسة Study Of The Effect Of Impact On Curved Composite Plates

اسم المؤلف: نورس جبار ناصر الرماحي
اسم المشرف: خلدون عبد الجبار الجبوري ساجدة كريم راضي
الموضوع العام: هندسة الميكانيك
السنة: 2011
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:

تصميم المسيطرالخطي النشيط باستخدام فضاء الحاله للسيطره على السرعه في نظام توربيني غازي Design A Linear H_? Robust Controller By Using State Space Approach For Control The Speed Of Gas Turbine System

اسم المؤلف: نهال داوود سلمان العكيدي
اسم المشرف: يحيى عبد الله فرج فؤاد علوان صالح
الموضوع العام: هندسة الميكانيك
السنة: 2010
الموضوع الدقيق: هندسة الميكانيك
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
1 ... 29 30 31 32 33 ... 44