عرض: 25 50 75 100 النتائج

نتائج البحث: 15 من أصل 15

الخصائص الكهروضوئية لاغشية TiO2 : CuO المحضرة بطريقة البلازما المنتجة بالليزر للتطبيقات الفوتونية Optoelectronic properties TiO2 : CuO films prepared by Laser induce plasma for photovoltaic applications

اسم المؤلف: نهى حسن حرب سلمان
اسم المشرف: صباح نوري مزهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الاغشية الرقيقة
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم في القياسات تحقق من الخواص التركيبية والبصرية والكهربائية لاغشية ثنائي اوكسيد التيتانيوم TiO2)) النقية والمشوبة بمادة اوكسيد النحاس (CuO) والتي رسبت على ارضيات زجاجية منظفة بشكل مناسب بدرجة حرارة الغرفة وبتراكيز مختلفة من اوكسيد النحاس CuO (0,5,10,15,20)wt%. وقد استخدمت لذلك طريقة ترسيب الليزر النبضي (PLD) باستعمال ليزر النيدميوم ياك النبضي وبمعلمات ترسيب ثابتة وهي الطول الموجي 1064nm عند طاقة ثابتة 800mومعدل تكرار6Hz . وكان عدد النبضات المستخدمة (500), وقد لدنت الاغشية بدرجات حرارة مختلفة423, 523)K).تم تشخيص طبيعة تبلور الاغشية من خلال دراسة نمط حيود الاشعة السينية(XRD). اظهرت النتائج ان صفات الاغشية المحضرة ذات تركيب متعدد التبلور ومن النوع الرباعي والاتجاه السائد (110).كما وجد ان الحجم الحبيبي يزداد مع زيادة درجات الحرارة والتراكيز.كذلك تم دراسة طبوغرافية السطح باستخدام مجهر القوى الذرية (AFM), اذا تبين ان الحجم الحبيبي للاغشية المحضرة قد اعتمد على درجة حرارة التلدين. كما ادت زيادة درجة حرارة التلدين الى زيادة خشونة السطح.تمت دراسة الخواص البصرية بطريقتين من خلال تسجيل طيفي النفاذية والامتصاصية لمدى الاطوال الموجية (300 - 1100)nm، ومن خلال فحص شده الاستضاءة الفوتونية(PL) . اذ وجد ان قيمة فجوة الطاقة تقل بزيادة تراكيز مادة CuO والتلدين في كلا الفحصين.ومن خلال دراسة الخصائص الكهربائية للاغشية المحضرة, بينت النتائج ان التوصيلية الكهربائية قد زادت بينما هبطت قيمه طاقة التنشيط مع زيادة تركيز CuO ودرجة حرارة التلدين . اخيرا تم التعرف على نوع حاملات الشحنه من خلال قياسات تاثير هول, وكانت كافه الاغشية المحضرة من النوع السالب n , وبزيادة التركيز ودرجة حرارة التلدين يزداد تركيز حاملات الشحنة بينما تقل التحركية. | In this measurement, structural, optical, electrical properties of TiO2 (Nanocrytalline and CuO additive TiO2) were investigated. are successfully deposited on suitably cleaned glass substrate at constant room temperature, and different concentrations of CuO (0,5,10, 15,20)% wt. Pulse laser deposition(PLD) technique was used at a constant deposition parameter such as : (pulse Nd : YAG laser with λ=1064 nm, constant energy 800 mJ, repetition rate 6 Hz and No. of pulse was (500).The films were annealed at different annealing temperatures 423K and 523 K. The XRD measurements show that as deposit TiO2 : CuO thin films had polycrystalline structure, and XRD data of thin films coincided with tetragonal. The preferred orientation was along (110) direction for Rutile phase . The results show that the crystallite size increases with the increase of concentration of CuO and annealing temperature. AFM measurements confirmed that the films have good crystalline and homogeneous surface.The Root Mean Square (RMS) values of thin films surface roughness and grain size increased with the increase of annealing temperature. The optical energy gap is calculated by two techniques UV - Visible spectrum and Photoluminescence(PL)spectrum. Both indicate that the energy gap decreased with the increase of concentration of CuO and annealing temperature. By studying the electrical properties of TiO2 : CuO thin film, D.c measurements show that the increase of CuO concentration in the prepared thin films increases the conductivity, while the activation energy (Ea1,Ea2)decreases. Hall Effect measurements show that all films have n - type charge carriers and the increase of CuO concentration and annealing temperature lead to increase the concentration of charge carriers , while the mobility decreases

التحليل الاحصائي لخصائص الصور الرقميه لامراض الرئة باستخدام الاشعه السينيه Statistical Features Analysis of Lung Disease in Chest X - ray Images

اسم المؤلف: مروة عبد المجيد عزيز
اسم المشرف: صباح نوري مزهر
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: معالجة الصور
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: يعتبر الكشف المبكر عن امراض الرئة وخاصة مرض السرطان يعتبر من المشاكل الكبيره لان تركيبه الخلايا السرطانية والتركيبات الفسيولوجية لها معقدة ومن الصعب تشخيصها بسبب التركيبة المعقدة للرئة لانها تتكون من عدة فصوص وبمساعدة التقنيات الحديثة مثل الاشعة السينية والتقنيات الرقمية اصبحت عملية الكشف المبكر عن امراض الرئة اسهل واقل تعقيد.تحتوي صور الاشعة السينية على ضوضاء وذلك لاحتوائها على عظام القفص الصدري وكذلك عظام القص بالاضافة الى ان الاشخاص يرتدون بعض الملابس التي تظهر بالتصوير مما يشكل عقبة كبيرة في تمييز الامراض وخاصة الاورام. لقد تم الاستعانه بنظام برمجي يعتمد على معالجه الصور الرقميه وتحليل الانسجه لغرض اعطاء افضل النتائج في تمييز امراض الرئه ومن الجدير بالذكر ان الصور التي تم التعامل معها ماخوذة من مستشفى دبي بالامارات ومعهد الاشعة في باب المعظم .تم في هذا البحث تطوير خوارزمية لغرض التخلص من عظام القفص الصدري والقص وكذلك الضوضاء باستخدام التقنيات الرقمية الحديثة حيث استخدمت طريقتان الاولى لم تعط النتائج المطلوبة والثانية اعطت نتائج جيدة وبمساعدة عملية التعتيب (Thresholding) تم فرز المرض ( الورم ) .استخدمت طريقة تحسين الصور بالاعتماد على بعض المرشحات بالاضافة الى طريقة الكشف عن الحواف . لقد قسمت الرئة الى جزئيين علوي وسفلي وتمت المقارنة بينهما من خلال حساب الخصائص الاحصائية التي تم استخراجها من احد طرق التحليل النسيجي وهي First order ) ) .وعند تشخيص المنطقة التي تحتوي على الورم يتم دراسة نسيجها وتحليله بالطرق الاحصائية . ايضا تم استخدام طريقة حساب الخصائص الهندسية والتي تعطي معلومات حول انتظامية شكل الورم .كل مرض بالرئة ياخذ شكل معين وحساب الانتظامية يسهل عملية تشخيص المرض او الورم.واخيرا تم استخدام طريقة قوانين الاقنعة التي لفت مع الصورة ومعها استخدمنا طريقة التجزئة الملونة ( Watershed) حيث اظهرت عملية المزج هذه نتائج جيدة لفرز نسيج الورم عن نسيج الرئة السليم.اظهرت الدراسة تطابق بين النتائج المستخرجة وتشخيص الطبيب الاختصاصي. | The early detection of lung disease, especially lung cancer is a difficult problem, because of the structure of the cancer cells or other pathological. The cells are difficult to be diagnosed and identified, because the complex structure of the lungs. With the help of the detectors and the x - ray images, the detection of the lung disease become easier, but the x - ray images contain noise and the rips appear in the images, which forms an obstacle in showing the infection in the lung. A computerized system that depends on the digital image processing with the textural analysis produced a good way to detect the lung disease. Two ways have been implemented to detect the diseases, one of them failed but the other gives good result to segment the tumor.The statistical and geometrical feature has been accounted for the normal part and abnormal. In this study the segmentation process (tumors and diseases) since its tissue differed from the normal part of the lung our test samples were taking form hospital in the United Arab Emirates and the institute of radiology (Medical city). The first order textural analysis has been used for lung texture analysis with the help of Enhancement and edge detection methods. The geometrical parameters have obtained. These parameters help to give the specific area and shape of the tumor or cancer, which helps the radiologist to give the right amount of radiation therapy without affecting the normal parts. Also, the low mask which is a statistical texture analysis used with the color segmentation method (watershed) to detecting the tumor and analyzing its texture. Finally, the statistical and geometrical features with the help of the segmentation method produce a good way for the detection of the lung disease and to give the specific treatment.

تصنيع كاشف من انابيب الكاربون النانوية لليزر الاشعة تحت الحمراء Fabrication of Carbon Nanotubes Detector for IR Laser

اسم المؤلف: مروة عبد الرحمن داود
اسم المشرف: سمر يونس طه وسن رشيد صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تصنيع كاشف يعمل في منطقه الاشعة تحت الحمراء البعيدة وبدرجة حرارة الغرفة باستخدام اربع انواع من انابيب الكاربون النانوية متعددة الجدران. (MWCNTs, COOH - MWCNTs, short - MWCNTs and DWCNTs) .انابيب الكاربون النانويه رسبت بتقنيه (dip coating) و((drop casting لتحضير اغشية انابيب الكاربون النانوية متعدد الجدران على قاعده سليكون مسامي من نوع n و. p تم تبخير اقطاب الالمنيوم على اغشيه انابيب الكاربون النانوية لتصنيع كاشف يعمل في منطقه الاشعة تحت الحمراء البعيده. تم دراسه الخواص التركيبيه والطبوغرافية والبصريه وحسابات هول لهذه الاغشيه المصنعة . تم فحص الخواص التركيبه لغشاءMWCNTs باستخدام حيود الاشعه السينيه (XRD) واظهرت النتائج ان له تركيب متعدد االتبلور وشكله سداسي والغالب كان باتجاه (002). مجهر القوة الذري ((AFM تم فية التركيز على تشخيص خواص السليكون المسامي مع انابيب الكاربون النانوية متعددة الجدران. وجد ان الفلم له توزيع سطح متجانس مما يشير الى التوزيع الجيد لانابيب الكاربون النانوية فوق النتؤات النانوية للسليكون. تم تعين معدل الحجم الحبيبي وكانت بحدود 87.05 nm . المجهر الالكتروني الماسح (SEM)استخدم لدراسة طوبوغرافية اغشيه انابيب الكاربون النانوية متعددة الجدران ووجد ان هذه الاغشيه متجانسة ولاتوجد فيها اية تكتلات او شقوق .فجوة الطاقه البصرية في المنطقة تحت الحمراء تم ايجادها من فحص FTIR وكانت فجوة الطاقة0.12 eV. دراسة طيف رامان ولانابيب الكاربون النانوية متعددة الجدران, بينت ان الطيف يتحدد بثلاثة انواع من الحزم D وG وPRM .وجدن الخط (D) وجد انه يقع عند 1561.62 cm - 1 والتي تشير الى عدم الانتظام بسبب العيوب وتقوس لشبيكه انابيب الكاربون متعددة الجدران بينما الخط (G) يقع بحدود 1750 cm - 1 ويكون نتيجه اهتزازات في اواصر C - C الخط الثالث PRMكانت تقع عن2700 cm - 1, هذه الحزم ممكن استخدامها لتقدير اي عيوب في الكاربون. نسبه الشدة D/G تساوي 1.135 . مطياف الاشعه تحت الحمراء استخدم لدراسة طيف انابيب الكاربون النانوية وللبوليمر والصبغة وظهرت امتصاصية جيده لانابيب الكاربون النانوية عند الطول الموجي 10.6 µm والذي يقع ضمن منطقة تحت الحمراء البعيدة ممايجعلها اختيار جيد لتطبيقات الاشعة تحت الحمراء. اظهرت قياسات تاثير هول ان انابيب الكاربون متعدد الجدران المرسبة على قاعدة السليكون المسامي هي من نوع شبه الموصل الموجب p - type)) ولها توصلية عالية. خصائص التيار - فولتيه واستجابيه الكاشف المصنع قيست عند الظلام والاضاءة لهذه الاغشيه بواسطه التشعيع بليزر ثاني اوكسيد الكاربون بطول موجي 10.6µm وبقدرة 2.5 W و2.2 . استجابية وخصائص كاشف التوصيل الضوئي تم تحسينها عن طريق تغطية افلام انابيب الكاربون النانوية متعدد الجدران بطبقة سمكها0.1mm من البوليمرات polyanilin وpoly methyl acrylae وبالاضافة الى صبغة methylene blue هذه الانواع من البوليمرات المطعمة بالصبغه تعتبر كمعالجة سطحية لغشاء الكاشف والتي تزيد بشدة من الاستجابيه الضوئيه لكاشف اشعه تحت الحمراء البعيدة.خصائص الكاشف (الكشفيه , الربح ,الاستجابه , القدره المكافئه للضوضاء ) حسبت قبل وبعد عملية الطلاء بالبوليمر ووجد ان الربح يزداد بحدود 25 مره اكثر من النماذج غير المطعمة .بينما الكشفيه ازدادت من (cm.Hz^1/2)/W 107 الى 1011(cm.Hz^1/2)/W بعد طلائها بالبوليمر .النتائج اظهرت ان الاستجابيه تزداد اكثر من الاستجابيه لاغشيه الكاربون النانوية غيرالمطعمه وتصل الى 0.0177 A/W لنوع انابيب الكاربون متعدد الجدران من نوع شبه الموصل السالب المحضر بطريقه (drop by drop ) وبينما اعلى الكشفية النوعيه بعد اضافه البوليمرات المطعمه بالصبغه كانت 7.08*1011 (cm.Hz^1/2)/W في حالة انابيب الكاربون متعدد الجدران لنوع شبه موصل السالب محضر بطريقه (dip coating) .هذه القيم تعطي اثبات لتاثير البوليمر في تحسين خصائص كاشف التوصيل الضوئي الاشعة تحت الحمراء البعيدة تم التحقق من تاثير تغطية اوتطعيم افلام انابيب الكاربون النانوية بالبوليمر على زمن الاستجابة الكاشف ووجد ان زمن النهوض كان 1.42ms , زمن الاستجابية كان 2.14ms بينمزامن الهبوط كان 3.92ms . | In this study the infrared photoconductive detectors works at far infrared region and at room temperature were fabricated. The detector fabricated using four types of carbon nanotubes CNTs (MWCNTs, COOH - MWCNTs, short - MWCNTs and DWCNTs).The carbon nontubes suspension is deposited by dip coating and drop - casting techniques to prepare thin films of CNTs. These films are grown on porous silicon (PSi) substrates of n - type and p - type Si. The aluminum electrodes were evaporated on the CNTs film to fabricate the far IR detectors.The structural, morphological, optical properties and Hall measurements of the film were studied. The structure of the MWCNTs film is examined by X - ray diffraction (XRD) and found to be polycrystalline of hexagonal structure with strong orientation at (002). The AFM studies are focused on the characterization of the PSi - CNTs and found it had a good and uniform surface homegensity which gives a good indicator for formation of the MWCNTs over the nanospikes of Si. The average particle size was determined and found to be 87.05 nm. The scanning electron microscope (SEM) technique has been applied to study the morphology of the deposited MWCNTs film. The results shows that the film are homogeneous and does not have areas with clusters or cracks.The optical energy gap in the IR region was calculated from FTIR spectrum and found to be 0.12 eV. From Raman shift spectrum for the MWCNTs, it was found that the spectrum is dominated by three typical lines; D - band, and G - band, and RPM band. The D - line is located about 1561.62 cm - 1 which assigned to the disorder induced by defects and curvature in the nanotube lattice, while G - line is located about 1750 cm - 1 due to the in - plane vibration of the C - C bonds. The RPM band is located at 2700 cm - 1 . These bands can be used to evaluate the extent of any carbon - containing defects. The D/G intensity ratio was 1.135. FTIR spectrophotometer was used to study the infrared spectrum of CNTs, polymers and Methylene Blue dye, which appear that CNTs have good absorbance in the wavelength of 10.6 µm. This is mean that these materials are very good candidate for IR applications. Hall Effect measurements show that the carbon nanotubes deposited on porous silicon substrate has a p - type semiconductor behavior and high conductivity. The I - V characteristics and the photoresponsivity of the fabricated detector are measured at dark and under illumination for CNTs film by IR radiation from CO2 laser of 10.6µm wavelength and power of 2.2 and 2.5W. The photoresponse and figures of merit of the photoconductive detector is improved by coating (functionalized) the CNTs films with layer of 0.1 mm of the blend polyaniline, polymethylmeth acrylate and methylene blue dye. This type of polymer coating can be considered as a surface treatment of the detector film, which highly increases the photoresponse and specific detectivity of the fabricated CNTs IR detector. The figure of mertis (Rλ, G, NEP and D*) were calculated before and after functionalization process. It is found that is increased in about 25 time than that for uncoated samples, while the specific detectivity was increased from order of 10+7 (cm.Hz1/2)/W to 10+11 (cm.Hz1/2)/W after coated with polymer.These values give an improve for the effect of polymer on the enhancement of the performance of IR photoconductive detector. The effects of the coating CNTs film with polymer on the response time of the detector investigated and found that the rise time was 1.428 ms, response time 2.14 ms while the fall time was 3.92ms .

تاثـيـر الـتـعـويـض Gd وBa عـلى خـواص التوصيـلية الفائـقـة للمركب Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10+ ? Effect of Gd and Ba Substitution on the Superconducting Properties of Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10+ ? Compounds

اسم المؤلف: فــردوس شاكــر احـمـد
اسم المشرف: ندى خضير عباس لمياء خضير عباس
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تحضير المركبات Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ ولقيم (0≤x≤0.5) و(0≤y≤0.3) بطريقة تفاعل الحالة الصلبة التقليدية. كما درس تاثير التعويض الجزئي بـ Gd محل Ca والـ Ba محل Sr على التوالي على خواص التوصيلية للمركب بواسطة مطياف حيود الاشعه السينية (XRD)، مطياف الماسح الالكتروني (SEM )، مطياف تفريق طاقه الاشعه السينيه (EDX)،حساب محتوى الاوكسجين في المركب وقياسات المقاوميه الكهربائية DC. ان ظروف التلبيد المثلى للمركب النقي درجة حرارة تلبيد مساوية الى 850 درجة مئوية وبفترة زمنية 140 ساعة مع تبريد العينات في الهواء.استخدمت تحليلات الاشعة السينية EDX لفحص نسبة العناصر المكونة للمركب Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δوطاقاتها وقد تمت المقارنة بين تراكيز العناصر في العينات التي اظهرت حالة التوصيل الفائق. بينت تحليلات حيود الاشعة السينية لجميع نماذج فائقة التوصيل انها تمتلك طورين الطور الفائق التوصيل العالي (2333)BiPb - والطور الفائق التوصيل الواطئ (2212)BiPb - مع وجود طور الشوائب. وان جميع العينات لها تركيب معيني قائم. كما تم حساب ثوابت الشبيكة، النسبة المئوية لوجود الطور العالي (2333)BiPb - للعينات وكذلك كثافتها كما وجد بان قيمة الثابت البلوري (a) تزداد مع زيادة نسبة الكادلنيوم بينما تقل قيمة الثابت البلوري (c).بينت قياسات المقاومية الكهربائية ان قيمة درجة حرارة الحرجة Tc تقل مع وجود التعويض. وهذا الهبوط في قيمة Tc يشير الى ان الاخماد في خاصية التوصيل المفرط في النماذج المعوضة بـ Gd وBa يكون اقل من النماذج المعوضة بـ Gd فقط. قيمة درجة حرارة الحرجة Tc في النماذج المعوضة بـ Gd باعلى من 0.2 تقل الى 100.5 K، بينما قيمة محتوى الاوكسجين يقل. زيادة تركيز الـ Gd الى x≥0.3 يؤدي الى انتاج نماذج شبه موصلة.كما وجد ان التعويض بـ Gd وBa معا ادى الى تحسين قيمة الـTc الى 102K عند x=0.2 وy=0.1. كما ان قيمة المقاومية تقل قليلا لكنها لا تصل الى القيمة الصفرية لانها تتصرف بسلوك شبه فائق التوصيل.استخدم المجهر الالكتروني الماسح SEM لمعرفة طبيعة السطح لطور التوصيلية الفائقة وكذلك لبحث تاثير التعويض بـ Gd فقط واظهرت النتائج تواجد تراكيب على شكل صفائح والتي تميز انماء الحبيبات للطور BiPb - (2223) العالي. حيث تبدو الحبيبات نوعا ما كثيفة ومترابطة جيدا.اذ ان هذه الحبيبات في النماذج المعوضة بـ Gd فقط تكون اكبر حجما ومختلفة جدا. اما اتجاهاتها فيبدو اقل عشوائية مع نقصان الفراغات. اضافة Ba يؤدي الى زيادة الفراغات والتي تزيد من المسافة بين الحبيبات.تم تعيين الحجم الحبيبي للنماذج المحضرة باستخدام مايكروسكوب القوى الذرية (AFM)، كما تم تعين الخشونة كداله لنسب التعويض ايضا. | A series of the compounds with nominal composition Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ with (0≤x≤0.5) and (0≤y≤0.3) were prepared by the conventional solid - state reaction method. The influence of gadolinium and barium substitution at Ca and Sr sites respectively on the superconducting properties, have been investigated by the X - ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x - ray spectroscopy (EDX), oxygen content and DC electrical resistivity measurements. The optimum sintering temperature for the pure composition is 850˚C and sintering time is 140h by two steps.Energy dispersive x - ray spectroscopy (EDX) analyses was used to test the proportions of the elements of the compound of Bi1.6Pb0.4Sr2 - yBayCa2 - xGdxCu3O10±δ.X - ray diffraction analysis revealed that there exists two phases i.e. BiPb - (2223) and BiPb - (2212), in addition to the impurity phases. It was found that the crystal structure was orthorhombic. Parameter values, the volume fraction of the (2223) - phase of prepared samples and their densities have been calculated. It was found that the lattice parameter value a increase with the increase of Gd content, while the lattice parameter value c was decreased. Electrical resistivity measurements show that the value of the superconducting critical temperature Tc decrease with the supstitutions content. The depression of Tc indicates that the suppression of the superconductivity in Gd and Ba substituted samples is lower than that Gd substituted only.Substitution of Gd up to 0.2 will decrease the transition temperature to TC=100.5 K, while excess oxygen content decreases. Increasing of Gd content to x≥0.3 produced semiconductor samples. It has been found that substitution of Gd and Ba together enhance TC to 102 K at x=0.2 and y=0.1. The resistivity decreases slowly but does not become zero even at the boiling point of liquid nitrogen but it behaves like a superconductor. The morphology of the samples obtained by SEM of the sample substituted with Gd only shows the layered structure which characterizes the growth of BiPb - (2223) grains. The grains appear rather dense and well connected.The grain in samples containing Gd only have a larger size and aspect very different. Their orientation seems less random and porosity even smaller. The addition of Ba appears to increase the porosity which manifested in large space between the grains. The grain size of samples were determined by atomic force microscope (AFM) techniques, the roughness were also determined

تصميم منظومه تفريغ حاجز الجهد العازل ودراسه تاثير البلازما غير الحراريه المنتجه في الضغط الجوي على بعض خصائص كاشف الاثر النووي CR - 39 Design of Dielectric Barrier Discharge and Study the effect of Atmospheric Pressure non thermal Plasma on some Properties of CR - 39 track Detectors

اسم المؤلف: فاطمه علي خضير
اسم المشرف: حامد حافظ مربط
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: فيزياء البلازما
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذه الدراسة تم تصميم وتصنيع منظومة تفريغ حاجز الجهد العازل Dielectric Barrier Discharge تعمل هذه المنظومة على انتاج البلازما غير الحرارية عند الضغط الجوي الاعتيادي، تتالف المنظومة من قطبين مصنوعين من الستانلس ستيل بقطر(50ملم) ومعزولين بمادة التفلون بقطر (10) ملم,القطب الاعلى ثابت والقطب الاسفل مثبت على منصة قابلة للحركه للاعلى والاسفل لاجل تغير المسافه مابين الاقطاب. تم استخدام نوعين من المواد العازله بين الاقطاب : الزجاج والتفلون وباسماك مختلفه لكلا المادتين (1,2,3) mm وذلك لغرض المقارنه. تم دراسة خصائص المنظومة الكهربائية من رسم منحني تيار - فولتية وفولتية الانهيار الصامت لكل مادة عازلة ولثلاثه مسافات فاصلة بين الاقطاب (1,2,3 mm). حيث وجد انه بزيادة المسافة بين الاقطاب من (1الى 2الى3) ملم تزداد فولتية الانهيار. كذلك وجد ان قيم التيار تزداد بنقصان المسافة بين الاقطاب ،وكذلك شملت هذه الدراسه تاثير سمك الماده العازله المستخدمه على فولتيه الانهيار وقد وجد ان زياده سمك الماده العازله تؤدي الى زياده قيمه فولتيه الانهيار.وقد تم ايضا دراسه تاثير تردد فولتية التفريغ على قيم تيار التفريغ باخذ قيم التردد (50, 1000, 500, 750, 1250) هيرتز . تم دراسة تاثير البلازما الغير حراية الناتجة من المنظومة على كاشف الاثر النووي الصلبه، حيث تم تعريض كاشف الاثر النووي من نوع CR - 39 المشعع بجسيمات الفا من مصدر الفا ( الراديوم - 226) الى البلازما الناتجة من المنظومة لفترات زمنية (60 - 1) ثانية، وقد وجد ان اثار جسيمات الفا على الكاشف تظهر بعد ( 10) ثانية من تعريض الكاشف للبلازما وتزداد كثافة الاثار على الكاشف بزيادة زمن التعريض الى ان تصل لقيمتها العظمى عند الزمن (50) ثانية ثم تبدا بلاختفاء. | In this study the design and manufacture of Dielectric Barrier discharge system was done. This system works to produce non - thermal plasma at normal atmospheric pressure. It consists of two electrodes made of steel (stainless steel) with radius (50mm) and isolated with Teflon of radius (10mm), the upper electrode is fixed and the lower is plaud on a movable stand that can move upper and lower to control the distance between the electrodes. Two types of isolated materials are used between the electrodes with different thicknesses. The properties of the designed system was studied from the current - voltage characteristics curve and silent discharge voltage for every insolate matter and for three distances between electrodes (1,2,3)mm. It is found that with increasing the distance between the electrodes from (1 to 2 to 3) mm discharge voltage increases and it's also found that the value of current increases with decreasing distance between electrodes.This study also included the study of the effect of the insolated matter thickness on discharge voltage. It's found the increasing of the isolated matter thickness lead to increase the value of discharge voltage and we also studied the effect of frequency of discharge voltage on the value of discharge current for different values of frequency (50,500.750.1000.1250) HZ.The effect of non - thermal plasma that was produced from the system on Solid State Nuclear Track Detectors has been studied where State Nuclear Track Detectors type CR - 39 radiated by alpha particle from alpha source (Radium - 226) is exposed by plasma produced from the system for time from (1 - 60 sec) it is found that the effect of alpha particle on detector is appears after (10) sec from exposure of detector to plasma and the number of tracks on detector will increase by increasing the time of exposure so it reach it's maximum value at time 50 sec and begin to disappear

تصميم وتصنيع الطلاء المضاد للانعكاس معتمدين طريقة الليزر النبضي في الترسيب DESIGN AND FABRICATION OF ANTI REFLECTION COATING BY PULSED LASER DEPOSITION

اسم المؤلف: زينب حازم عبد الرحيم
اسم المشرف: الاء نزار عبد الغفار كاظم عبد الواحد عادم
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا العمل تم تصميم طلاء المضاد للانعكاس بسمك ربع ولاربع طول موجي ودراسة خصائص بصرية للاغشية الرقيقة والاستفادة منهما في تصنيع طلاء مضاد للانعكاس ضمن المنطقة المرئية والحمراء القريبة . اعتمد تصميم الطلاء على مفهومين اساسيين هما نظرية المصفوفة المميزة وتصميم طلاء بسمك ليس ربع طول موجي ولحالة السقوط العمودي للضوء.اخذين بنظر الاعتبار ظاهرة التشتت. تم دراسة نفاذية وانعكاسية الطلاء كدالة للتغير في الطول الموجي للضوء الساقط باستخدام الرزمة البرمجية MATLAB. اوضحت نتائج التصميم امكانية الحصول على انعكاسية واطئة لمدى واسع من الطيف الكهرومغناطسي يشمل المنطقة المرئية ومنطقة الحمراء القريبة عندما يكون السمك البصري ضمن المدى اقل 0.7L لمادة MgF2 المرسبة على الزجاج ويكافي الاسماك الهندسية للغشاء (34.5,36.91,78.3) نانومتر, وامكانية الحصول على انعكاسية واطئة لمدى واسع في درجة حرارة التلدين عند سمك البصري 1.2L ويكافى السمك الهندسي ((141.6 نانومتر. تكتسب هذه النتيجة اهميتها في امكانية تخمين السمك الامثل قبل البدء بمرحلة التحضير حيث اشارت النتائج الى معادلة تجريبية تربط بين عدد النبضات وسمك الغشاء. لغرض تصنيع الطلاءالبصري, تم استخدام طريقة الترسيب بالليزر النبضي لليزر النيديميوم - ياك1064 نانومتر الذي يعامل بتقنية التولد المتوافق الثاني بطول موجي 532 نانومتر والذي يعمل بتقنية عامل النوعية بمعدل تكرارية (1 - 6) هرتز وامد نبضة 10 نانوثانية. لتحضير اغشية فلوريد المغنيسيوم المرسبة على الزجاج, قمنا بدراسة ظروف التحضير التي تتضمن التغير بعدد النبضات (150و250 و350و 450 نبضة) لترسيب اغشية فلوريد المغنيسيوم ومدى تاثيرهم على سمك الاغشية المحضرة وتركيبها وحجم الحبيبات وبالتالي على نفاذيته ومدى امكانية استخدامه كطلاء مضاد للانعكاس. لقياس سمك الاغشية المحضرة, تم استخدام جهاز مقياس اللبسومتر وتم استخدام جهاز المطياف لايجاد النفاذية والانعكاسية والثوابت البصرية ومعاملي الانكسار والتوهين (n, k) وعلى التوالي. اوضحت النتائج بان الطلاء المضاد للانعكاس المحضر من طبقة واحدة يمتلك نفاذية عالية وانعكاسية واطئة تشمل منطقتين من الطيف المرئية والحمراء القريبة وان معامل الانكسار يتراوح بين (1.05 - 1.25( في حين كانت اسماك الاغشية المحضره تتراوح بين )34.5 - 141.6 ) نانومتر, كذلك اوضحت صور (AFM) بان الحجم الحبيبي يتراوح ضمن المدى (86.55 - 94.81) نانومتر. | In this work design and fabricated antireflection coating (AR’C) with single layer. Design of the AR’C was based on the characteristic matrix method with quarter and non - quarter optical thickness. The effect of deposited material at normal incident of light was taken into account and the reflection performance was computed with the aid of MATLAB over the visible and near infrared region. Results show that wideband AR’C was achieved when deposited thin film of MgF2 on glass with non - quarter optical thickness less 0.7L related to geometrical thickness (34.5,36.9,78.3 nm) at room temperature. Also wideband AR’C achieved with non quarter 1.2L optical thickness deposited related to geometrical thickness (141.6nm) at annealing temperature. However results accept significant importance to estimate the optimum thickness before preparation stage. In this study antireflection coating fabricated by using pulsed laser deposition technique (PLD) which deposit MgF2film on glass substrate. Q - switching Nd : YAG laser beam with second harmonic generation (SHG) technique of wavelength 1064 nm and 532 nm, repetition rate 1 - 6 Hz and the pulse duration 10 ns was used. The film thickness, structural behavior and grain size dependent on that prepared conditions which include variation number of shot (150,250,350,450 pulses) have been studied.The thicknesses of MgF2 nanostructure films were measured using Lipsometre. Further, the experimental results shows high transmittance, wideband low reflection and the refractive index within the range (1.05 - 1.25), while the thicknesses are (34.5 - 141.6 nm). Atomic force microscope (AFM) image illustrate that the grain size of the film within the range (86.55 - 94.81) nm

دراسة طيفية لبعض الجزيئات ثلاثية الذرات باستخدام الطرق شبه التجريبية Spectroscopic study of some tri atomic molecules using semi - empirical methodes

اسم المؤلف: ذكرى كمال طه
اسم المشرف: زياد عدنان صالح
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: دكتوراه
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تــم في هــذا البحث دراسـة الخـواص الطيفيه كجهد التاين , الالفه الالكترونيه وقيم الطاقه للمدارات الجزيئيه المشغوله بالالكترونات (EHOMO)، والفارغة من الالكترونات (ELUMO) وفجوة الطاقة وكذلك حساب الكهروسالبيه والصلاده الكيميائيه والنعومه (قابلية التفاعل). لبعض الجزيئات ثــلاثيـة الـــذرات نظـــريا , اذ ان الجزء النظري تمت دراسته من خلال استخدام برنامج كاوسين (Gaussian09 لبعض الجزيئات الثلاثية الذرات كجزيئة ثاني اوكسيد الكربون , الماء , الاوزون , هيدروكسيد الصوديوم , كبريتيد الهيدروجين وكلوريد المغنسيوم وذلك باستخدام برامج الكم شبه التجريبية التي تستغرق مدة زمنية للحسابات (PM3,PM6) قياسا الى الطرائق المتقدمه التي استخدمت في البحث هي طريقتا دوال الكثافة وهارتري فوك ( HF, DFT ) وباستخدام عناصر مجاميع اساس مختلفه . تم رسم الشكل الهندسي الفراغي الاكثر استقرارا اعتمادا على المحاور الداخلية (˚r,θ˚,Φ)f ومنها تم حساب اطوال الاواصر والزوايا المحصورة بينها وعزمي القصور الذاتي وثنائي القطب , ثوابت الدوران , الكتله المختزله , طاقة نقطة الصفر والاستقطابيه وطاقات المستويات الاهتزازية المنشطرة نتيجه لتاثير رينر - تيلر , ومضاعف - - ℓ وحساب الانتقالات بين المستويات الاهتزازيه كذلك حساب الطاقه الكليه للجزيئات كافه. كذلك تم حساب ترددات انماط الاهتزاز الاساسية للجزيئه ورسمها ضمن منطقة الاشعة تحت الحمراء من الطيف الكهرومغناطيسي . اذ توصلت الحسابات النظرية ان قيم مضاعف - ℓ - تزداد كلما انتقلت الجزيئات الى مستويات طاقة اعلى واما بالنسبة لحسابات تاثير رينر - تيلر وجد انها تسبب في انشطار مستويات الطاقة الاهتزازية بالنسبة لكل الجزيئات في المستويين الاهتزازيين (1,0,1) و(2,2,0) لهما مقدار الطاقة نفسه . اضافة الى جانب وجود مستويات طاقة اخرى منشطرة متقاربة في قيم طاقاتها . | The study of spectral properties such as ionizations potential, electron affinity, electronegative, chemical hardness, softness and electrophonic index from inharmonic potential energy curve, spectroscopic dissociation also calculated EHOMO, ELUMO and energy gap Eg by theoretical parts .this studies by using Gaussian 09 (Gaussian 09 Revisioon - A - 02 - SMP) program of some tri - atomic molecules such as (CO2, H2O ,O3 NaOH ,H2S , MgCl2 molecules ) using semi empirical quantum programs , By using semi - empirical (PM3,PM6) , density functional theory and Hartree - Fock (DFT ,HF) methods this by using different basis sets So after drawing structure optimization of molecules depending on the internal coordinate f(r,θo,φo), then calculate length of bonds and angles between it , moment of inertia, dipole moment for Molecules by quantum mechanics methods which, then we calculated the orbital energy values (EHOMO ) and (ELUMO) ; and from these values ; ionization energy was calculated for molecule by take absolute values to (EHOMO )A computational calculation is a valuable tool for estimating the (geometry, total energy, electronic properties, dipole moment, polarizability, electrostatic surface potential, vibration frequencies) of molecular structures. The IR spectrum of molecule primitive vibration frequency located within infrared region from spectrum ranged is obtained Then - ℓ - type doubling we conclude that values increasing with it exited to high levels , from Renner - Teller effect cause splitting of energy of or vibrational state (1,0,1) , (2,2,0) have the same energy

دراسة تاثيرات خسارة الانحناءات لليف البصري في منظومة الاتصالات البصرية Study Effects of Optical Fiber Bending Loss in Optical Communication System

اسم المؤلف: دعاء هشام محمد
اسم المشرف: سمر يونس الدباغ
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: في هذا البحث , تم دراسة تاثير الانحناء على انتقال الاشارة الضوئية خلال الالياف البصرية. هذا العمل يتضمن قياسات الخسارة في القدرة خلال الليف البصري بوجود الانحناءات عند عدد لفات مختلفة من (1 - 10) لفة وعند اقطار انحناء مختلفة (12.5 , 10.5 , 8 , 6 , 4 , 3 , 2 , 1) cm. نوعين من الالياف البصرية تم استخدامها , الليف المتعدد الانماط (MMF ) باطوال مختلفة (1 , 20 , 40 , 100 , 120 , 140 ) m وليف احادي النمط بطول (4.5 m) .واستخدم نوعين من الليزرات ليزر دايود الاحمر (λ=650 nm) وليزر دايود اخضر (λ=532 nm).القدرة الضوئية تم قياسها باستخدام جهاز قياس القدرة. تشير النتائج ان كلما قل قطر الانحناء وزادت عدد اللفات فان الخسارة في القدرة الضوئية تزداد. حيث ان القدرة الضوئية لليزر الاخضر عند الطول الموجي (λ=532 nm) تقل من (48.083*10 - 4) mW الى (41.114*10 - 4) mW عند اللفة الاولى لليف متعدد الانماط بطول (40m) عندما تم حني الليف من cm12.5 الىcm 1. اما لليف الاحادي النمط, فان القدرة الخارجة لليزر الاخضر عند طول موجي (λ=532 nm) تقل من (13.608) mW الى (13.32) mW عند اللفة الاولى من طول (4.5) m لليف احادي النمط عندما تم حني الليف من 12.5 cm الى 3 cm . اظهرت النتائج ايضا ان تاثير الانحناء في القدرة الخارجة في حالة الليف المتعدد الانماط اكبر مقارنة بالليف احادي النمط. وكذلك النتائج لهذا البحث تتضمن تصميم وتنفيذ منظومة اتصال الالياف البصرية لفحص تاثير الانحناء على الاشارات المنتقلة خلال الالياف البصرية متعددة الانماط حيث لف من (1 - 10) لفة وعند اقطار انحناء مختلفة ( 1,2,3,4 ) cm . تم تضمين الاشارات باستخدام ليزر nm 532 .الاشارة تم ارسالها خلال ليف متعدد الانماط باطوال مختلفة وهذه الاشارة تم الكشف عنها باستخدام كاشف السليكون الضوئي (AEPX 65) . وجد ان الانحناءات تؤدي الى تغييرات واضحة في سعة ( جهد ) الاشارة الخارجه ؛ حيث يقل الجهد من 0.64volt الى 0.52 volt عند زيادة عدد اللفات من) 1 - (10 لفة في ليف بطول 40m وقطر الانحناء (1) cm.ويقل الجهد الى حد 0.2 volt في ليف بطول 140m وقطر الانحناء (1) cm.واخيرا الاشارات المنتقلة فيمنظومة الياف بصرية باستخدام كاميرا (CCD) واستخدام حاسبة شخصية معUSB TV STICK لرؤية تاثير الانحناء على انتقال الاشارات خلال الالياف البصرية. حيث ان الاشارة الخارجة ستقل من 0.68 volt الى 0.6 volt عندما عدد اللفات تزداد من (1 - 5) لفة في ليف بطول (1) m .اجرى احتساب كل من نسبة الاشارة الى الضوضاء ومعدل الخطا في نقل البيانات في للاشارات المنتقلة في منظومة الاتصالات عند اقصى طول لليف البصري 140m وعند اللفة 10 فكانت 115.147dB و3.68x10 - 27 على التوالي . بينما نسبة الاشارة الى الضوضاءSNR ومعدل الخطاBER في نقل البيانات في الاشارات المنتقلة باستخدام كاميرا CCD عند طول الليف البصري 1m وعند اللفة 10 فكانت 100.49dB و5.98x1o - 24 على التوالي .. اظهرت النتائج ايضا ان نسبة الاشارة الى الضوضاء تقل ومعدل الخطا في نقل البيانات يزداد بزيادة عدد اللفات في كلا المنظومتين | In this work, bending loss effects of optical fiber on the transmitted signal were studied.This work includes measurements of the power loss through optical fiber with the presence of bends at different wrapping turns (1 - 10) turns and at various bending diameters (12.5, 10.5, 8, 6, 4, 3, 2, and 1) cm. Two types of optical fibers were used, multimode optical fiber (MMF) of different lengths (1, 20, 40, 100, 120, 140) m and a single mode optical fiber (SMF) of length (4.5 m). Two optical sources were used, Red laser diode (λ=650 nm) and green laser diode (λ=532 nm). The output power was measured using an optical power meter. Results indicated that as the bending diameter decreased and the number of wrapping turns increased, the power loss increased. The output power of green laser diode at (λ=532 nm) decreased from (48.083*10 - 4) mW to (41.114*10 - 4) mW at the first turn of 40m MM fiber length when bent from (12.5 to 1) cm. For SMF, the output power of green laser diode at (λ=532 nm) decreased from (13.608) mW to (13.32) mW at first turn of (4.5) m SM fiber length when bent from (12.5 to 3) cm. The higher alteration output power in the case of multimode fiber has been deduced as compared with that of the single mode fiber. Also the results of the project involves a design and an implementation optical fiber communication system to investigate the effect of bending on the transmitted signals through multimode optical fiber wrapped (1 - 10) turns and at different diameters (1, 2, 3, 4) cm . Signals were modulated using 532nm laser diode then sent through multimode fiber of different lengths and detected by silicon photo detector (AEPX 65). The bending induces changes in the amplitude (voltage) of the output signal, the output voltage decreased from 0.64 volt to 0.52 volt when the no. of turns increased from 1 - 10 turns for 40 m optical fiber at a bending diameter of (1cm) and decreased to 0.2 volt for 140m multimode fiber at a bending diameter of (1cm).Finally, a transmitted signal in optical communication system has been built using CCD camera and Pc with USB TV STICK for monitory the effect of bending on signals that transmitted through optical fibers. The output transmitted signals decreased from 0.68 volt to 0.6 volt when the no. of turns increased from 1 - 5 turns for 1 m optical fiber. The calculations of signal to noise ratio (SNR) and Bit Error Rate (BER) for transmitted signals in optical communication system at maximum fiber length of 140m and 10turns are equal to 115.147dB and 3.68x10 - 27 respectively. While for transmitted signal form CCD camera at fiber length 1m and of 10 turns are equal to 100.49dB and 5.98x1o - 24 respectively.Results show that SNR decreased and BER increased as no. of wrapping turns increased for both systems.

التوصيلية الضوئية للمفرق الهجين a - GaAs : Zn/c - Si Photoconductivity of a - GaAs : Zn/c - Si Heterojunction

اسم المؤلف: ايمان كاظم جبر
اسم المشرف: حسين خزعل رشيد رامز احمد الانصاري
الموضوع العام: علوم الفيزياء
السنة: 2015
الموضوع الدقيق: الفيزياء
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: حضرت اغشيه زرنيخات الكاليوم المشوب بعنصر الزنك بنسبة 1% GaAs : Zn باسماك مختلفة mµ(1.0 ,0.75 ,0.5 ,0.25) بتقنية التبخير الوميضي على ارضيات زجاجية ورقائق من c - Si بدرجة حرارة الغرفـة وتحت ضغط فراغي 10 - 5 mbar وبمعدل ترسيب مقارب الى 0.92Å/s لدنت هذه الاغشية بدرجات حرارة تلدين مختلفة K(373, 473 ) لمدة ساعة واحدة ولدراسة الخواص التركيبية تم تلدين اغشية زرنيخ الكاليوم المشوبة بالزنك والمرسبة على الزجاج بسمك mµ0.5 الى درجة حرارة and773)K473,373).تم دراسة الخواص التركيبية للاغشية المحضرة على ارضيات زجاجية بواسطة حيود الاشعة السينية XRD وقد اظهرت نتائج حيود الاشعة السينية ان الاغشية الملدنة بدرجة حرارة اقل من 473K ذات تركيب عشوائي وبزيادة درجة حرارة التلدين اصبح التركيب متعدد التبلور F.c.c عند درجة حرارة 473K وبالاتجاه المفضل (111) ,اما دراسة خصائص السطح المورفولوجية بواسطة مجهر القوة الذري (AFM) , فقد وجد ان خشونة السطح تقل مع زيادة درجة الحرارة التلدين وتزداد مع زيادة السمك اما الحجم الحبيبي فوجد انه يزداد مع زيادة درجة حرارة التلدين والسمك.درست الخصائص الكهربائيــة للاغشية المحضرة على ارضيات زجاجية بتغير السمك ودرجة حرارة التلدين حيث ازدادت التوصيلية الكهربائية المستمرة (2.05 - 59.3) 10 - 3 (.cm) - 1 لجميع الاغشية المرسبة بزيادة السمك وبدرجة حرارة الغرفة قلت (15.1 - 2.39) 10 - 3 (.cm) - 1 بزيادة درجة حرارة التلدين من (RT - 473)K للاغشية ذات سمك 0.5mm، قلت طاقات التنشيط الكهربائية (Ea1& Ea2)بزيادة سمك الغشاء وزادت بزيادة درجة حرارة التلدين (RT - 473)K. اظهرت قياسات التوصيلية المتناوبة لاغشية الـ GaAs : Zn باسماك مختلفة وبدرجات حرارة تلدين مختلفة بانها تنطبق مع نموذج تنطط الحاجز المرتبط(CBH) . وبينت قياسات هول الى ان جميع الاغشية هي من النوع (p - type)، وتركيز الحاملات يزداد - 89.29 )×1016 cm - 3 (0.08 بزيادة سمك الغشاء وتقل (1.95 - 0.21)×1016 cm - 3 بزيادة درجة حرارة التلدين (RT - 473)K. وكذلك لاحظنزايادة قيم التحركية بزيادة درجة حرارة التلدين ,بينما تقل مع زيادة السمك.اظهرت القياسات البصرية لاغشية a - GaAs : Zn بان الانتقالات البصرية كانت مباشرة مسموحة ذات فجوة طاقة تزداد مع زيادة درجة حرارة التلدين بينما تقل مع زيادة السمك.قيست سعة الانحياز العكسي للمفرق الهجين a - GaAs : Zn/c - Si كدالة لفولتية الانحياز وبتردد 100KHz وقد دلت هذه النتائج على ان المفرق من النوع الحاد، لوحظ تناقص السعة بزيادة جهد الانحياز العكسي، وايضا لوحظ ان السعة تقل بزيادة سمك الغشاء وتتناقص مع زيادة درجة حرارة التلدينF/cm2(2.24 - 1.54) للسمك 0.5µm. وجد ايضا ان جهد البناء الداخلي للمفرق يتناقص 0.15)Volt (0.40 - عند زيادة السمك .درست خواص تيار - فولتية للمفرق الهجين a - GaAs : Zn/c - Si تحت ظروف الظلام وقد وجد بانها تتفق مع نموذج اعادة الاتحاد - الاختراق ، كذلك اظهرت النتائج ان كثافة التيارتقل بزيادة درجة حرارة التلدين وسمك الغشاء وذلك بسبب زيادة العيوب عند سطح المفرق. وعامل المثالية يزداد بزيادة سمك الغشاءمن(2.4 - 2.7). ومن خلال قياسات تيار - فولتية تحت ظروف الاضاءة وجدنا ان كثافة التيار الضوئي يزداد مع زيادة درجة حرارة التلدين ويقل مع زيادة السمك.درست خواص كثافة تيار الدائرة القصيرة وفولتية الدائرة المفتوحة حيث وجدنا ان ,Jsc Voc, تزداد قيمهم بزيادة درجة حرارة التلدين | GaAs weight doping percentage by 1% Zinc (GaAs : Zn) films have been deposited by flash evaporation technique on glass and c - Si wafer substrates at room temperature under vacuum of 10 - 5 mbar with rate of deposition near to 9.25Å/sec. These films of different thicknesses (0.25, 0.5, 0.75, 1.0) µm have been annealed at different temperatures Ta (373, 473)K for to study the properties of structure of a - GaAs : Zn films that deposited on glass substrate with thickness 0.5 µm annealed at (373, 473 and 773)K. The structural characteristic of the films prepared on glass substrates have been studied by using X - ray diffraction, which shows that the films have amorphous structure for sample annealed at Ta> 473K. The samples annealed at 473 K showed a polycrystalline with Face - Center cubic system preferred orientation along (111).The surface morphological characteristics were studied by atomic force microscope (AFM) which show that decreased in surface roughness with increasing annealing temperature and increased with thickness increases. The grain size increases with increasing annealing temperature and thickness.Electrical properties of the films prepared on glass substrates were studied with different thicknesses and annealing temperatures. The D.c conductivity for all deposited films increases from (2.05 to 59.3) 10 - 3 (.cm) - 1 with thickness increases at room temperature and decreases from(15.1 to 2.39) 10 - 3 (.cm) - 1 with increase of annealing temperature from RT to 473K for films of 0.5m. The electrical activation energies Ea1and Ea2 decrease with thickness increases and increasing with increasing of annealing temperature from room temperature to 473K. A.C conductivity measurements for GaAs : Zn films with different thickness and annealing temperatures were consistent with correlated barrier hopping model (CBH).Hall measurements showed that all the films are p - type with carrier's concentration increasing from( 0.08 to 89.29)×1016 (cm) - 3 with film thicknes increase and decreasing from (1.95 to 0.21)×1016 (cm) - 3 with increasing of annealing temperature from room temperature to 473K. Also we observe that the mobility values decreases with thickness increases and increasing with increasing of annealing temperature. The optical measurement showed that the nature of the optical transition has been direct allowed with band gap energies increases with increasing of annealing temperature while decreases with increases of film thickness.The reverse bias capacitance for a - GaAs : Zn/c - Si heterojunction was measured as a function of bias voltage at frequency 100 KHz, and it is indicated that these heterojunction are abrupt. The capacitance decreases with increasing the reverse bias voltage, also decreasing with increasing annealing temperatures from (2.24 to1.54) ×10 - 7 F/cm2 for film thickness 0.5 µm and with increasing film thickness.The value of built - in potential for heterojunction decreases from (0.4 to 0.15) Volt with increasing of thickness.while increases with increasing temperature from (0.3 - 0.4) Volt for film thickness 0.5 µm.The J - V characteristics of the a - GaAs : Zn/c - Si heterojunction under dark have been studied under dark condtion. This may be in agreement with tunneling recombination model. Furthermore, the product shows that the current density decreases with the increasing of annealing temperature and film thickness for the increases in the defects at heterojunction interface. The ideality factor increases with the increasing film thicknes from (2.4 to 2.7). Under illumination, the photocurrent density increases with increases of annealing temperatures and it decreases with the increases of thickness. The short - circuit current density and open - circuit voltage have been studied where the Jsc ,Voc , increase with the increasing of annealing temperatures

دراسة تاثير تركيزانابيب الكاربون النانوية متعددة الطبقات على الخصائص الفيزيائية لمتراكبات الايبوكسي Study The Effect of Multi Walled Carbon Nanotubes (MWCNTs) Concentration on Physical properties of Epoxy composites

اسم المؤلف: الفت احمد محمود
اسم المشرف: خالد رشاد الراوي عدوية جمعة حيدر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Multi wall carbon nanotubes (MWCNTs) have excellent mechanical, electrical, and thermal properties. When MWCNTs incorporated in to polymer, that’s leads to better improvement in mechanical, electrical, and thermal properties result at low MWCNTs content. Due to the change in the electrical and mechanical properties MWCNTs / Epoxy composites have attracted significant research interest specially due to their potential for application in active control of strain sensing in composites structure or as strain sensor .Different type of MWCNTs, long and short (L - MWCNTs & S - MWCNTs) were used as reinforcement in epoxy resin with volume fraction ( 0.1,0.2, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 ,4.5, & 5%) respectively were used to prepare epoxy composites in order to examine and study some of their mechanical properties ( tensile strength, Young's modulus, flexural strength, fracture toughness, flexural modulus, Impact strength, and microhardness ), conductivity properties (AC conductivity, thermal conductivity), and morphology properties (SEM,FTIR). Direct mixing processes use to prepared (Epoxy / MWCNTs) composites, its involved use ultrasonic and magnetic stirrer bar mixing process to disperse the MWCNTs into the epoxy resin system. The results shown an improves in the mechanical, thermal, and electrical properties with increase volume fraction (0.1 to 2%), and then decreased with further increasing the MWCNTs content but stay higher than of pure epoxy. At (1.5%) we observed enhancement in tensile strength (28.19%, 15.74%) and Young's modulus (35.71%, 30.95%) for L - MWCNTs and S - MWCNTs respectively, and the higher enhancement in flexural modulus and flexural strength due to 2% vol. fraction of L - MWCNTs reached to (71.43 %, 102.26 %). The high impact strength and microhardness values result at (1. 5%L - MWCNTs) reached to (823.996%), and (41,102%) respectively.Better improvement in thermal conductivity and AC conductivity result at 2% volume fraction for both MWCNTs types compare with pure epoxy. The high thermal conductivity values due to L - MWCNT reached to (369.31%) or three times from the thermal conductivity of pure epoxy, compare with the value of enhancement for S - MWCNTs (183.39 %).Investigations of electrical properties of MWNT/polymer show a significant increase of electrical conductivity with the increase of the MWCNTs content. The AC. electrical conductivity of the sample with 2 % vol. fraction L - MWCNTs reached to four orders of magnitude higher than that of the pure polymer at a frequency range of (5E 4 to 5 E6) Hz, its present(9.66E - 7 to 5.78E - 5 Ω/cm) compare with the AC. electricalconductivity for S - MWCNTs ( 6.57 E - 11 to 2.24E - 5 Ω/cm) at same volume fraction and frequency range and with the electrical conductivity of pure epoxy (4.5E - 12 to 6.2E - 9 Ω /cm).Scanning Electron Microscope images illustrate the morphology of tensile fractured surface of EP/MWCNTs composites, although the morphologies of tensile fractured surface show ductile fracture with dispersed stresses in more than one crack propagation. Increased roughness and ductile behavior shown with increased volume fraction of MWCNTs. Above 2% vol. fraction of MWCNTs we shown increase the agglomeration that’s lead to decrease in properties of epoxy composites.

المتحسسات الطبيعية للخلايا الشمسية ذات الصبغات المتحسسة على قواعد اوكسيد الخارصين Natural Sensitizer for Dye - Sensitized Solar Cells Based on Zinc Oxide

اسم المؤلف: اوراس طارق شاكر
اسم المشرف: صلاح عبد الله حسون رعد محمد صالح الحداد
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: This thesis focused on the study of dye - sensitized solar cells (DSSCs) based on ZnO nanoparticle as a semiconducting layer with two natural dyes.The present study began by synthesizing ZnO nanoparticles by two methods. The first method ZnO nanoparticles prepared by sol - gel method with (0.1, 0.2, 0.3 M) zinc acetate and then thin films of zinc oxide prepared by using spin coating technique with thickness equal to (109 nm), while the second method technique of ZnO nanoparticles prepared by sol gel method (0.2 M) from zinc acetate was selected as the optimum concentration to make thin film of zinc oxide (In the form of a paste) by using doctor - blade technique with thickness equal to (111nm).The effective mass model for spherical particles (Brus equation) for ZnO nanoparticles were (1.3147, 1.4056, 1.6379 nm) for three concentration.The characteristic of the prepared films on glass substrates have been examined by X - ray diffraction analysis (XRD), UV - Vis spectroscopy, photoluminescence spectrum (PL), scanning electron microscopy (SEM), Atomic Force Microscope (AFM) and Thermo Graviometric Analysis (TGA).In both methods , ZnO films were prepared on transparent conducting oxide (ITO) coated glass then addition of chlorophyll as sensitized dye which extracted from spinach leaves and anthocayanin pigment from pomegrenate juice and they were used as the working electrode (anode) of dye - sensitized solar cell (DSSCs).The absorption spectra of all dyes were performed by UV - Visible spectroscopy which showed that the dye absorbed light in the visible region from (400 nm) for chlorophyll pigment and (510 nm) for anthocyanenpigment.The (I - V) characteristic curves of the fabricated tow cells were measured and studied at constant light intensity. All photovoltaic parameters of the cells were presented. The results revealed that the extract of Pomegranate by using spin coating lead to the highest efficiency (15%).

تحضير جسيمات ثنائي اوكسيد التيتانيوم النانوية بطريقة الصول - جل باستخدام الازالة بالليزر وتطبيقاته كاصباغ نانوية Synthesis of TiO2 Nanoparticles by Sol - Gel Method using Laser Ablation for Nano Paint Application

اسم المؤلف: زينب ناصر جميل
اسم المشرف: سمر يونس طه عدوية جمعة حيدر
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: دكتوراه
اللغة: الانكليزية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: Titanium dioxide (TiO2) nanoparticles (NPs) have been widely investigated to employ in the paint fields due to its importance as pigments. Therefore, TiO2 particles are perfect candidates in the paint industry. In addition to use nanoparticles for enhancing the local coating properties in our country.In this work, the sol - gel technique employed to prepare TiO2 nanoparticles with two procedures and two precursors (TIP and TiCl4), the obtained two phases of TiO2 (anatase and rutile), nanopaticles colloid irradiated by pulse laser ablation (PLA) for minimizing particle size. It has been fabricated a laboratory paint (TiO2/SiO2 hybrid sol - gel). Nanoparticles characterization has been carried out by different devices to study properties such as morphology, structure and optical properties, Transmission Electron Microscope (TEM) and Dynamic Light Scattering (DLS) demonstrated the size and shape of nanoparticles in the range of (3 - 40) nm spherical for anatase, while the rutile results were around (50 - 70) nm with ellipsoidal shape. Scanning Electron Microscopy (SEM), which was confirmed the results of TEM and DLS. Zeta - potential (ζ) results which were indicated the colloid stability, surface charge for the first procedure and the second procedure, anatse and rutile (+39.02, +25.68,+41.31 and+34.33) mV, respectively. The structural characteristics of TiO2 nano - powder investigated by X - ray Diffraction(XRD) to define the phases of TiO2, anatase at 500˚C , rutile at 900˚C, and Raman Spectroscopy to distinguish between crystalline phases, Raman shift resulted for anatase about (142.1,411.1,547.4 and 669.6) cm - 1, rutile (190,272,452 and 616) cm - 1. The optical properties measured by UV - Vis. Spectrophotometer to compute the energy band gap for both phases at (3.8 eV) for anatase and (3.4 eV) for rutile.The nanoparticles were mixed with coating solution (i.e. hybrid sol - gel and organosilicate nanoparticles (OSNP) in different concentrations (1%wt and 10%wt) for both anatase and rutile. Films were prepared by spin coating method which has been studied by the Energy Dispersive X - ray Spectroscopy (EDS) / Scanning Electron Microscope to define the components of concentrations, additionally, the films were studied the thickness and refractive index (n) by Spectroscopic Ellipsometry(SE) for nano - anatase (1%wt and10%wt) films thickness (128,382)nm and n equal (2.25,3.32), for nano - rutile films thickness (313.5,645.2) nm and n equal (2.5,2.8). Profilometer investigated the coating topography to demonstrate the Root Mean Square (RMS) toidentify the roughness which increased by increasing particle size. Fourier Transform Infrared (FTIR) analysis showed the strong bonds of the nanoparticles in frequency region between (400 - 1000) cm - 1 corresponds to Ti - O - Ti, also the bands at 793 and 1100cm - 1 were for a symmetric Si - O - Si stretching and vibration, respectively.Self - cleaning tests on the films were performed using Rhodamine B (RhB) as a pollution indicator. The effect of UV - irradiation on the films and contact angle measurements were studied. Anatase and rutile incorporated as a mixture with different ratios (1%.1.5% and 2%) in the local paint measurements, such as a washability and contrast test.Antibacterial activity in 10 - 5 and 10 - 3 TiO2 concentrations exhibited superior antibacterial activity with two types of bacteria, Escherichia coli (E - coli) and Staphylococcus aurous (S. aureus), respectively. TiO2 nanoparticles were more efficient as antibacterial agents with Staphylococcus aurous as compared with E - coli.

تحضير ودراسة الخصائص التركيبية والبصرية لاغشية cds النقية والمشوبة بـ cu وzn ذا التركيب النانوي المحضرة بطريقة ترسيب الحمام الكيميائي Preparation And Study of Structural And Optical Properties of Cds Pure And Doped Zn, Cu Thin Films Nanocrystalline Prepared By Chemical Bath Deposition

اسم المؤلف: نغم ياسين احمد
اسم المشرف: ندى خضير عباس
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم تصنيع اغشية كبريتيد الكادميوم النانوي والمرسبة على قواعد من الزجاج وبسمك ( 300nm, ±250nm ±) باستخدام طريقة الترسيب بالحمام الكيميائي ((CBD في محاولة لتغيير فجوة الطاقة لكبريتيد الكادميوم (2.4 eV) CdS بمزجها مع كبريتيد الخارصين مرة وكبريتيد النحاس مرة ا | Nanoparticles of undoped cadmium sulfide (CdS) were prepared on glass substrates of (±300nm,250nm) thickness using chemical bath deposition (CBD) method. An attempt was made to modify the band gap of CdS (2.4 eV) by preparing a mixed lattice with a band g

تاثير اوكسيد المغنيسيوم وثاني اوكسيد السليكون النانوي على بعض الخواص الميكانيكية والحرارية لمتراكبات الايبوكسي The Effect of Nano Mgo And Sio2 on The Mechanical And Thermal Properties of Epoxy Nano Composites

اسم المؤلف: مريم زهير عبد الواحد طعمة
اسم المشرف: خالد رشاد الرواي
الموضوع العام: علوم الفيزياء
السنة: 2015
الدرجة: ماجستير
اللغة: العربية
مكان الجامعة: بغداد
الصفحات الاولى:
المستخلص: تم دراسة تاثير اضافة كل من اوكسيد المغنيسيوم النانوي وثاني اوكسيد السيلكا النانوي على الخصائص الميكانيكية, والحرارية, وبحجم حبيبي (40nm) لاوكسيد المغنيسيوم و(15 - 20nm) لثاني اوكسيد السيلكا,وبنسب وزنية هي (0.01,0.02,0.03,0.04,0.05,0.07 and 0.1%) لكلا الما | We discussed in this research the effect of addition of nano magnesium oxide and nano silica dioxide on the mechanical and thermal properties in granular size (40 nm) for magnesium oxide and (15 - 20 nm) for silica dioxide in percentages (0.01,0.02,0.03,0